No USB in Device Manager.

Similar Questions

• Removed usb drivers Device Manager

  Hello

  I had a problem with the USB and Firewire connections on my HP XW8400 PC.  The system works under windows xp pro.  The problem I had was that some devices/readers etc were not noticed when I plugged the different Slots USB or firewire and others have been.  I have a dongle usb constantly on my system to run a publishing package that I use on a daily basis... I also have an attached Firewire/USB PCI card.  I use the rear firewire and slots of the editing software and hard drives USB and USB slots front is where I keep my dongle and I use the usb port and firewire for other devices such as readers, usk sticks, cameras etc etc.  As I say, things work well, other custom.  For those who don't to correctly connect the peripheral material Add Wizard would come upward, I press on to connect to the web to search for and then it they'd material device wzard found no drivers/solution/whatever.  Being that it is my main computer to work I didn't want to risk anything and so have put up with him for a long time.  However, these days, I need to get a camera connected to the said work stations and so made test after trying to install the software to factory for the camera via camera software CD and realizing that he did not always work.  I used Malware Bytes and it came with nothing and then AGV antivirus and it came wirth nothing.  Ok... So I thought that it MUST be something to do with the USB (and Firewire) themselves.

  I searched on google and it brought me to this microsoft support page: http://support.microsoft.com/kb/310575 I read through it and he said how to uninstall and re-install the usb via Device Manager drivers.  I went through the instructions and I have clicked on each of the usb devices in Device Manager and uninstalled.  Then I restarted my computer and when it said that it had detected new hardware everytime I clicked on the Hardware Wizard it now impossible to connect to the internet because one of the devices was my router to wide band.  GREAT!

  So, I spent half a day to find the original Windows CD and I reflected on the drive, but couldn't find anything to do with the USB drivers.

  I tried the last known good configuration and that was obviously after deleting files of drivers said Ihad closed and restarted a couple of times since then.

  I checked the system restore and that has been cut!

  If someone could please tell me how to install the said USB controller to ensure that I get the USB drivers installed?

  I'm guessing I now need to go through the window / each device and find the software CD and add the drivers, but I don't even know if I have half of the Conference on disarmament, or they just instantly connect via XP.  I certainly can't find anything for my router, which means I can't even on the web.

  And why has my material wizerd for usb and firewire devices summer miss me for so long?

  All advice appreciated.

  PS... Microsoft, don't you think not that 1 - it would be wise to let people know on the above mentioned page remove the usb drivers may well turn off your Internet so that the wizard doesn't work and you can visit his profile when you connect.  If she had said that I would never be deleted.  2. due to some software I use (Avid Media Composer) on the specially designed workstation, there are various conflicts that occur when the upgrade to Service Pack 3, so you stop the real users of microsoft products to have access to your DIFFICULTY IT thingymajig if they decide to stay on service pack 2.  Why make life so hard Micfrosoft?  I'm very careful with my systems.  I should have a choice of not having to be upgraded if it means he can endanger other packages, but I'll always freedom of basic set of tools and services that you offer.  I'm fed up.   The following, that I get computer is a MAC!

  You're right, that Windows XP has drivers for a large number of features built into the operating system.  Peripheral USB in particular are supposed to be 'plug and play' - you simply connect the device to the computer, it goes "Bong", and the device is recognized and installed.

  A "Repair Installation" window is supposed to leave all your applications and your data intact - but you will almost always see advice to backup everything that you care about the 'just in case '.

  Try posting here: http://social.technet.microsoft.com/Forums/en-us/itproxpsp/threads
  Technet forums are supposed to be for the "professional" so maybe, your message will be seen by someone who has a better knowledge of this issue than most people who post on the forums for answers.

  Items to include in your message:

  • You have XP Pro sp2 (and why)
  • That you have had a hard time to install a camera and so found and followed the instructions in KB310575
  • After you follow the instructions in KB310575, all of your USB devices are reports 1 Code and you are unable to install the drivers
  • Everything that you think is relevant
  • And, more importantly, a link to this topic, so anyone can see what's been tried so far: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/deleted-usb-drivers-device-manager/2272852e-7462-4d65-a8ad-e8162c9eb800#_self

  Good luck and I'm sorry, I could not solve your problem.

• Yellow exclamation beside my prolific USB in Device Manager

  Original title: Prolifique USB to Serial problem

  I downloaded the latest version of the prolific PL2303 software for my Visa 64-bit computer.  However, in Device Manager, the device is listed with a yellow exclamation point - when I click Properties it says "the device cannot start (Code 10)".
  I tried uninstalling and reinstalling - and updated the driver - but still the problems occur.
  Any ideas why?
  Thank you

  Thanks for all your suggestions.  However, none of them solved the problem.

  I came across this link to a blog on the internet - that solved the problem

  http://www.usglobalsat.com/download/546/win_drivers.zip

  I'm using Vista Home Premium 64-bit.  The pilot worked the first time.

  Thanks a lot again - problem solved!

• USB stick not recognized by Device Manager

  I have a USB drive which worked in my Vista SP2 machine for 2 years until I took it.  I tried to run recently.  Even if the machine recognizes the connection and the removal of the disc with the bong audio, it does not appear in my computer, in the Manager device (like a USB Mass Storage Device - hidden or otherwise) or in the management of Computer Management(for doing fdisk/format functions) disk.   When I insert or remove the disc, the lists of USB in Device Manager do not seem to change.

  I tried to delete infcache.1, but in vain.

  The player with the same cables and the power supply, is recoqnized and works with other systems my Vista SP2 and SP3 of XP so I can exclude it as does not.

  Dig dig into that.  The pilots were to be reloaded, I noticed there is a USB 2.0 mass storage device listed while Vista searched through the database driver.  As soon as it is loaded, the name was changed to Cypress AT2LP (chip Cypress is the controller of housing) and the drive has disappeared.  Did a search for this and it seems that it is a problem running under Vista (drive works forever and then one day things change after an update to Vista).  Rename the driver (CYUSB.sys) and then reboot didn't help.

  I took the car to the most recent machine Vista and noted that the pilot has been there for a (USBSTOR Generic USB mass storage device. (SYS).  The drive works now.   Not sure where this storage of Cypress driver came (I certainly didn't not using it), but that was the problem.

• I can't access my USB ' s__ & I lost my USB icons in my device manager

  Once I used the XP Backup program '

  or the other of my USB port does not work"

  When I click on MANAGE MY COMPUTER, no USB icons where showed"

  What should I do?

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Disable "HP Smart Intall" for USB storage devices

  Details

  OS: Windows 7 x 64

  Laptop: HP Probook s 4540

  Printer: HP P1600

  After using an HP printer to my work and have installed the drivers "HP Smart Install" has been installed in a form any driver (?) USB.

  The option to double click default to any storage device that is inserted into a USB port is now 'HP Smart Install ". I can't remove this function.

  I deleted all the drivers for the USB via Device Manager - this has not fixed the problem.

  I reformatted the USB (was not empty in the first place - no autoplay files)-no solution.

  I returned all the default media - no fix AutoPlay options.

  I used SIUtility.exe HP printer drivers and used PC > disable HP Smart Install - no solution.

  I completely uninstalled all the computer - no fix HP printer drivers.

  This is a screenshot of the feature that I start to remove - http://i.imgur.com/v1IcdZ0.png

  Can you please advise how do I completely remove this feature as default double click for a storage device is to "explore".

  AngusMacsalvation,

  Sorry that it was not an option to turn off the Smart Install from the integrated Web server.

  I was check this.

  Make sure that you run the CD files or program uninstall.

  In this way, it must delete all the registry files.

  Make sure that the USB cable from the printer is disconnected.

  Here are the steps to run the uninstall of the computer or the CD.

  To uninstall program files:
  Go to start and select a computer.
  Select the C drive.
  Select the program files or program files x 86.
  Open the HP name and printer folder.
  Select uninstall.

  Uninstall from the CD:
  Go start, computer, right click on the CD for the printer, left click Open in a new window, double click on uninstall.

  Remove drivers in server properties, if they are still worn.

  Go to start, devices and printers.
  Highlight any printer.
  Click the print server properties in the upper part.

  Click the tab drivers at the top of the print server properties window.

  Choose the printer that you want to uninstall, and then click on remove.

  The next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click Yes to say that you are sure you want to do.

  Then in the window devices and printers, right click on your printer and remove the device if the printer is still listed.

  If the printer doesn't figure yet in the Device Manager or in the registry, we would delete there also.

  Keep me posted.

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• Satellite C650 - USB ports not recognized in Device Manager

  When I turned off my cell phone, I lose the use of my two USB ports. The only way I can get back them is to use Device Manager

  Go into the Manager of peripheral devices, Bus USB controllers, there are 6 x Intel ICH9 Family USB Universal Host controller 2 x Intel ICH9 Family USB2 Enhanced Host Controllers and 7 x USB hub root. When I lose the USB ports, USB root hubs seem to disappear, and the only way I can get back them is to uninstall the controllers and then right-click Universal Serial Bus Conrollers for "scan for changes on the hardware. This brings back the root hubs and USB ports work fine... until the computer turns off again.

  Someone at - he encountered this problem and managed to resolve it? Its a hassle to have to go through the uninstall it / Reinstall procedure each time. Your advice will be appreciated.

  Hey Buddy,

  You use the version preinstalled Windows from Toshiba or did you install your own version? I don't see any information about the BONES in your ad...
  Theoretically, it could be a software problem so ports USB work correctly if they recognized in Device Manager

  You should also try to update the Web from Toshiba site chipset driver. Maybe it helps.
  Otherwise, I could imagine that the update of the BIOS can also operate and this update you can get on the Web from Toshiba site too.

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.

  I have a USB-5133 can I use it on several computers. I'm putting it on another PC (XP Pro). The device is recognized by windows and it goes to install the drivers. When it's done, in the Device Manager-> data acquisition devices, I see "NI USB-5133 Loader. On other computers, he said only: "NI USB-5133. The green light on the device is NOT on, and the device does not appear in Measurement & Automation Explorer.

  No idea why the appropriate driver is not loaded? I have NO-SCOPE 3.5.2.

  Hello Gallamine,

  The NI USB-5133 Digitizer is a plug-and-play device, try removing the device in MAX.  Then, unplug the device and plug it in again.  The computer should record the device of MAX as "NI USB-5133.  If this does not work, the data base of the MAX could be damaged.  To resolve this problem, see the following link:

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  Finally, if the database setting does not resolve this problem, try to reinstall the latest version of OR-SCOPE.

  Kind regards

  Roman S

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• TouchSmart tm2 the usb hub controller are not not in Device Manager

  I have a Touchsmart tm2. Device Manager not tilts my USB Controller. There is a list with the yellow flag "unknown device". I tried to uninstall and restart. Problem persists. Therefore, none of my USB ports work. This issue coincides with the arival of the malware "mysearchdial" who took my browsers. My laptop is running Windows 64-bit edition, prepared of 12 GB of RAM.

  Thanks again. I have at least the link to Microsoft Essentials.

  I did use True Image Home to restore my OS on a previous image drive, October 2011. I had tried several times until I realized that I needed to be connected directly via ethernet and not wireless.

  It took an eternity o all updates, but now my Touchsmart is as good as ever.

  Thanks again for your response.

• MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

  Hello

  I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MAX tells me that it is one of the instruments GPIB installed on the computer which GPIB0 - USB-GPIB-HS. Do you know what is the reason to do this, because I want to use a multimeter in LabVIEW via GPIB, but I can't access it, I don't even see that there is a GPIB connection in the computer (in LabVIEW).

  Kind regards

  Alejandro Rodriguez

  It's the kind of old. Have you tried the last?

• USB-6008 appears in Device Manager but not in MAX or Labview

  I use Windows 7 Ultimate 32-bit and you want to use a USB-6008 in LabVIEW 8.5.1. The device appears under data acquisition devices in the Windows Device Manager. The flashing on the device, but the device does not appear in the Explorer of Measurement & Automation 8.7.1. am I missing something?

  He doubts.

  First, check the easy things... to refresh the list of devices to MAX and see if it comes to that.  I'm guessing you've already tried this, but it never hurts to check.

  My bet is that it's a database corrupted Max.  This happens from time to time.  Usually when I see it, the 'Dev1' always appears in LabVIEW if you plop down constant DAQ hardware or control.

  There are tools and processes to erase and start over with a new database, but in my experience, the best way to resolve it is simply update or reinstall MAX.