no visuals at the export only audio and a black screen.

Similar Questions

• Get the error code 0x80070426 and a black screen when recording in Windows Vista

  Original title: Error Code 0x80070426? __

  I have tried to connect with windows vista but had a black screen with the box in the middle that says error code 0x80070426

  Hi henry90909,

  See the instructions below thanks Darin Smith MS:

  If you do not have access to the Start button:

  1) click computer access with reduced functionality

  (2) a browser will open, type:%windir%\system32 in the address field

  (3) find the cmd.exe file

  (4) make a right click on the cmd.exe and select run as administrator

  (5) type: net start slsvc

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  Look under Tools.

• Why some videos play well on Facebook while others have only audio with a green screen?

  Why some videos play well on Facebook while others have only audio with a green screen?

  Hello

  Green screens are almost always a sign of a video driver issue.  Could you please send the contents of your "Display devices" section after generating a DXDiag report?

  What is a Dxdiag and how to report a?

  I suspect you may have an outdated video driver.  This FAQ can help you learn the steps required to update:

  Windows: How do I update the device driver for my graphics/video card?

  Finally, if the driver update doesn't help, try turning off hardware acceleration using the steps described here:

  How to disable or enable hardware acceleration?

  Thank you
  Chris

• Edit event managed by this case in LabVIEW 2013 does not show the specifiers of the event, Event Sources and events on screen resolution 800 x 600

  Edit event managed by this case in LabVIEW 2013 shows not specifiers of the event, Event Sources and events on screen resolution 800 x 600.

  As far as I know, the list of supported resolutions is determined solely by the graphics card. It is possible that one used by the PC supports only 800 x 600 as maximum resolution, even if you plug an external monitor.

  Like Dennis suggested, the recommended option would probably be to develop on another PC and only deploy an executable for the industrial PC. That's what we do with our systems (although not because of this problem, but because it makes sense. There absolutely no need to have the IDE installed in most of our systems).

  Other options:

  1. See if you can get an update of the driver from the manufacturer to solve this problem.
  2. Plug a USB Monitor with its own driver.
  3. Try to hide the taskbar and make the smaller title bar in the hope that the bug manifests.
  4. Try remote access in the PC. I think that some remote access programs allow you to specify custom resolutions that are not affected by the original drivers. Remote Desktop seems to be a likely this option even if it has been awhile since I've used it.
  5. Check the BIOS. I saw at least one industrial PC where there was some settings in the BIOS to control the resolution, but I don't remember the details, and it was quite limited. I think that in this case, you can change the resolution, but then the image does not fill the entire screen.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• New Y500 brand guard freezing and goes black screen

  I recently bought the y500 Monday and it was perfect until today where she got a blue screen of death with the ERROR of VIOLATION of CUSTODY of DPC dog or something like that and since then it has been freezing randomly and goes black screens where I turn it off? Any help?

  I fixed it I think it's all good, until here, if anyone has the same problem, I have just restored my pc to a date where he worked well and optimized my drivers. I may not be not similarly had to restore my pc

• Upgrade and repair black screen CQ61

  Hello

  I have a laptop Presario CQ61-214TU.  Upgrading to Windows 7 from Vista.

  Push the power button, I get a black screen and the fans and leds of power.  No MESSAGE or BIOS.  The LED caps lock flashes very slowly 3 times and then the unit resets.  When she comes back, it's the same thing the fan on, black screen except the CAPS LOCK led flashes slowly and continuously.

  I tried to disconnect the battery and AC and hold the power button / stop and most other Councils (removal of material, etc.) on the websites and the service.  (except those overheating).

  I guess that the motherboard or processor are defective.

  The mobo is 578053-001.

  The processor is AM80577T4300.

  As I have these out, I thought I would upgrade one or both.   What is the combination of both that I can put in the CQ61-214TU on an empty stomach.

  Thank you

  Here is the Manual:

  Manual

  The motherboard list you does not appear in the manual, or is the processor, although the official HP specs also show that you have the Pentium Dual Core T4300 processor and this motherboard withdraws as a motherboard Intel CQ61. Fastest compatible processor is listed as a P8700 2.53 GHz.

  This is a replacement for your motherboard:

  http://www.eBay.com/ITM/HP-Compaq-CQ61-G61-Intel-motherboard-578053-001-test-OK-/251048516886

  And here's a P8700:

  http://www.eBay.com/ITM/Intel-Core-2-Duo-mobile-processor-P8700-2-53GHz-1066MHz-3M-CPU-OEM-P8700-OEM-/280921175424?PT=CPUs&hash=item416834f580

  Your laptop has nVidia graphics and is as good as it gets in this series of laptops, which is not a high end machine. So if you get the P8700 and a duplicate of your Board, you'll have the max hardware you can get. I have a question putting almost $200 in it, but it's your call.

  If this is the answer for you, please click on accept as Solution so that others can find it on the road.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• First Pro CC cs6 import only audio and no video

  Recently I visited an AE CS6 file, but when I try to import in first pro only allows me to add to the timeline as audio, although I can see the full video (sound and Visual) perfectly in the project folder. The rendering of the ae file is a MPEG-4 h.264, AAC Codecs. Is the problem with AAC or a bug? I tried to open the sequence after the first early, but that did not help. He plays very well in a video outside the first.

  Thank you!

  Hi Juliusn,

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you
  Ilyes Singh

• In CS3 can I export my audio and save it on a CD?

  Does anyone have experience exporting audio only to a file format and burning to CD?

  Is it as simple as export AUDIO as wav and burn the .wav to WMP file?

  Post edited by: Wes Cox

  Yes. Export as Audio export only. Check that multiplexing is set to 'None', which should be the default with the Audio ONLY verified export. Then choose 48 kHz 16-bit PCM WAV. This will create WAV file, where say you PrPro to locate him. It will be a file that can be burned onto a CD in the form of data. If you want the full CD Audio (CDA), Audition, Soundbooth or free, Audacity, this can convert CDA format, at 44.1 KHz (standard CDA) and can burn to a CD-Audio. Unaware of Soundbooth, or Audacity, but hearing can even organize your Audio-CD with tracks, if you have several files.

  Good luck

  Hunt

• SessionUtils.ExportSession - export only known and inferred values?

  Hello

  The SessionUtils.ExportSession method appears in support of two ways to export data from interview:

  (1) only known export, data provided by the user

  or (2) export data provided by the user, unknowns and deducted.

  Often, the amount of "unknown" data can be lengthy and is unknown, it generally does not provide a lot of value in a perspective of integration; pass data just unknown around in an XML object can be cumbersome.  And export only the data provided by the user is not particularly useful in integration scenarios where a value is updated based on the ability to infer the OPA.  Is there a way to export only the known (user-supplied) and inferred values, while ignoring the unknown?

  We currently take in charge "verbose" or not detailed in option for the ExportSession.

  If your concern is storage or transmission, maybe you could look at an intermediate step that eliminates the elements of undesriable.

• As you drag the video in the Timeline, only audio files will show, not video.  Why

  Hello world!

  So I had to update to PPCC 2015 after 2014 CEP kept crashing on me while I just changed.  After having reopened the project and the program telling me to convert everything on the new 2015 PPCC, I didn't think it was a big deal.

  Well now, the old version of my project can still play all the videos, and the editing I've done, but when I try to drag in a new video to continue editing, only audio files will come in the timeline. The video will play in the window of the fine source drive, but try to get the actual image of the video in the timeline, will not be displayed.

  It makes me crazy!

  What should I do?

  It was activated at the same time. I closed my projects and rebooted my computer to see if that would do anything and now it works as usual. Thanks for your help anyway!