No windows sound test - test of speaker sounds good

Similar Questions

• No Windows sound "Failed to Play Test Tone" error during the speaker test

  I have a desktop computer with a processor Intel Core 2 Duo CPU 32 - bit Windows 7 Home Premium.  It has run successfully for 2 years without any problem.  Sometimes the last month the noise stopped working.  When I try to configure the speakers I get the error message "Failed to play Test Tone".  It was originally plugged into the sound of the motherboard, so I purchased and installed a sound card.  After you have installed all the drivers, the sound still doesn't work, and I get the same error message.   I went through the tutorial 'No Sound in Windows' and run the audio troubleshooter, it does not find a problem.  I installed a new instance of Windows 7 on a partition on the same computer.  This instance of Windows sound plays, so I know the sound card works.  I think that a recent Windows Update may have caused the problem, but I can't understand that one.  Does anyone have a suggestion as to what I should try next?

  Thank you

  I ended up reinstalling Windows.  After that I did the sound came back.  I look very carefully at updates and ensuring that I have a return upwards before allowing Windows updates.  It was a major pain but at least my husband can now watch his videos with sound.

  Carol

• IDT Audio (bat) lack tab improvements to Windows Sound (sound check)

  Hi all

  I own a HP Pavilion DV6-6C57NR with Beats Audio for more than a year. A Couple of weeks, my computer crashed in a big way so I reinstalled Windows 7. I realized all my drivers and my sound works fine (except that [Fn] + B is not enable and disable the beats). The only problem is that I have more access to the improvements to Windows Sound tab

  

  I use the Volume equalizer in the strong rooms all the time. Any help to get it back would be appreciated.

  Sincerely,

  H

  Hello

  Whether or not you have the "Improvements" tab is down to the driver audio especially is installed - some allow this functionality and some do not.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55094.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the laptop.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, check if you have the tab improvements back.

  Note:  If you want the fn + combination B works correctly, you need to download and install the HP Quick Launch bar from the link below.

  HP Quick Launch buttons.

  Once the installation is complete, restart the computer before checking it in.

  Kind regards

  DP - K

• How to make the windows logo test?

  When you try to install an update to AVG free 2013, I get an error message... "- no plug n Play has not passed Windows Logo test drivers to.

  verify its compatibility with Windows XP"I have XP Home Edition.   Help, please!

  Mamawg

  Given what is happening with AVG I suggest you only contact them because they know what the problem is.

• Windows logo testing problems

  I am trying to install itunes on my computer and it says it was not installed correctly because he failed to pass windows logo testing is a way to solve this problem, because I can not sync my ipod touch now?

  I am trying to install itunes on my computer and it says it was not installed correctly because he failed to pass windows logo testing is a way to solve this problem, because I can not sync my ipod touch now?

  What version of Windows have installed you, including service pack?

  What version of iTunes are you trying to install, and where did you of?  I don't remember any warning message about failure to Windows logo test lately several that I have installed iTunes.

  In general, however, you can ignore safety warnings regarding the software has not passed Windows logo testing, at least for the software from sources deemed such as Apple.

  Please report any error messages you get in its entirety, without paraphrasing.

• Why do I get a message "software you are installing has not passed Windows Logo test, such as Legacy Driver, Activity Monitor and driver plug-and-play

  WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers

  Hi John,.

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.

  1. when exactly you get the error message?

  2. are you aware of any changes made to the computer before the show?

  This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.

  Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• Peripheral USB composite has failed the Windows Logo test?

  When you try to install LifeCam Cinema on my Windows XP with SP2, I receive a message that the composite USB device has not passed Windows Logo test & impossible to install the software for webcam.  When the device is plugged into the USB port, it is not recognized.  However, I use this same port to download photos from our camera & it works great.  I've tried everything... any solution?

  Make a right click my computer and click Properties, click hardware, click driver signing.

  Click on ignore, click OK, OK.

• My computer won't let me download a cd of new material. Said hardware has not passed windows logo testing.

  I want to add an adapter usb to my computer to watch movies on my TV. It came with the software, however the download access is denied.

  When you install the hardware in your computer (almost always), you must install a 'pilot', which is just software that tells your operating system (Windows, in your case) how to communicate with the hardware.

  Microsoft has a program she calls 'the logo test' which enables a company to label its products with the Windows logo.  Not every small manufacturer wants to go through the load of this test program, but if a company is trustworthy - and Trendnet is - then the fact that their products have not passed official testing procedures from Microsoft doesn't mean that their products will not work with Windows.  This is why you can usually ignore a message to the effect that a product has not passed Windows logo testing - if you also a pretty good reason to believe that the product will work.

  So just follow the instructions supplied with the adapter installation, put on the CD and install the software.  But the installation of this card is only the first part of your trip.

  Although I've not set my TV to watch streaming video from Netflix or Amazon, as I understand it, you need a TV that can be connected directly to the Internet.  In other words, you cannot download and save a copy of the video complete on your computer and then read it from your computer to the TV.  That's why's called it "streaming" video - you're not supposed to save a copy to your computer, but rather to look at the 'stream '.

  Thus, Amazon said, "the easiest way is to connect your TV to your router or modem broadband (DSL/Cable, for example) with an ethernet cable.»

  A lot of people with a connection broadband has a router, which has generally 4 Ethernet Sockets (and perhaps a point of both wireless access).  If you had one, you would just connect a "vacant" Ethernet between the TV and a cable to your router.  You, unfortunately, have a router with a single Ethernet Jack (I know you thought it as a modem, but it's almost certainly a modem and a router inside a box of Physics).  So, as you acknowledged, you don't connect your TV to the cable modem because it would need to disconnect your computer.

  You have two choices.

  You can buy a cheap Ethernet switch (e.g. this one) which would connect you to port on the back of the modem cable and then connect your computer and TV to two of the other ports on the switch.  This would probably work without having to make adjustments to configuration on your cable modem - but in the past, some customers wanted cable ISPS to pay extra for each computer connected to the modem cable and makes it a little difficult to so add connections on your own.  I don't think that is always the case, but because I don't have cable - especially not the same cable ISP like you - I don't know about you.

  Or you can buy a second Ethernet adapter of your computer (which is what you did) and then set up the "Internet connection sharing" (ICS) on your computer so that the TV can connect to the Internet through your computer.  Because you have already purchased this material, you probably want to set up ICS.

  Although there are many websites that explain how to configure ICS, because XP is becoming obsolete quickly, many of the older sites are more fully functional, including one who should have been better to show your situation (sharing a connection to local network to the Internet with another connection of LAN)

  Use the Network Setup Wizard.  Go to network connections (start > run > ncpa.cpl > OK) and click on "Set up a small business network or home."

  The 3rd screen looks like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29.shtml

  Choose the first choice.  Even if your computer connects 'via a residential gateway"(your cable modem/router) the"other computers"(TV) will connect"through this computer."

  The next screen should look like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/LAN.shtml

  If you have correctly installed the USB adapter, you should see a line like the one that was highlighted in the image (it's your modem cable connection) and a second line describes your connection to the LAN USB.

  If the wizard does not recognize the USB adapter as a connection to the local network, it will not let you continue (click on the 'Next' button on this screenshot, where there is only one LAN connection, and you'll see what happens).

  Assuming that the wizard allows you to continue to do so.  Your "computer name" is already filled in. Do not change. You can add a description if you wish.  When you get to the screen 'file and printer sharing', you can disable this feature (you're not going to share files between your computer and the TV).

  Confirm on the summary screen that "Internet" is through your "Local network connection" and that the wizard correctly selected your USB adapter as the "connecting to your network" (this screen shot shows that the connection to the Local network is connected to 'your network' because the Dial-Up connection is connected to the Internet)--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/Dial-Up/04--2.shtml (click on the scroll bar to) see the screen shot in all)

  When you complete the wizard, you should be able to connect your TV to your USB adapter and it should work (Yes, there is a lot of "desirable"; good luck).

• How to disable the log on the windows sound?

  How to disable the log on the windows sound?

  Hello

  To disable startup sound in Windows XP, follow these steps:

  a. click Start, click run, type mmsys.cpl and then click OK.

  b. click the sounds tab.

  c. under program events, click Windows logon.

  d. in the sounds box, click (none)and then click OK.

  See also: change Windows XP sounds

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• The software you are installing has not passed windows logo testing to verify that it is compatible with windows xp

  When installing Football Manager 2011, when its almost finished, he said:

  "The software you are installing is not windows logo testing to verify that it is compatible with windows XP. Please contact your system administrator.
  I guess its because I have a really old laptop, but if someone could confirm this or help it would be greatly appreciated!
  Thanks in advance

  Hello

  Not his because that the game developer has not presented the program of Microsoft
  Logo program that charges a fee to certify programs. It may very well be if he is a large
  producer of games. Also check with the developer of this game for more information.

  I hope this helps.

• The Digital Signatures and Windows Logo Testing

  I'm be repeated pop-up message says "HP PrecisionScan LT Installation - Digital Signature not found '.  I can accept that, but then when you try to install the software a message says: "software you are installing for this hardware HP ScanJet 3300 has failed the Windows Logo test.

  The software and drivers for Windows XP have been downloaded from the HP site with the message: verification ofsj650en.exeftp.hp.com

  The scanner worked fine with my old Dell desktop which had Windows 98.  I need new drivers to operate the scanner with my current Dell Dimension 3000 that has Windows XP Home Edition.

  Simply click on continue sort & install the driver. Because it is on the site of HP so nothing bad will happen. After completion of the installation, restart the computer. You will see then your device work well or not?

  Otherwise you can disable the feature of Windows by the following method of the driver signing:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/thread/5e048b0f-83b2-4281-b5e9-533ef3de564d/

  If you are not familiar with command prompt make normal means by "Run".

  S.Chatterjee

• Windows sounds play do not.

  I'm running a Windows ME OS and it is all nice and all until yesterday. I'm sure that all my drivers are correctly installed and properly configured devices. The strange thing is, multimedia files such as .mp3 or .avi files play without any problem. But the streaming of YouTube videos does not give me sound and Visual. Windows sounds disappeared also that IE - no sound when opening the file, Pinball is not any audio, from windows no sound even if a file has been selected as the startup sound.

  Any ideas as to why it happened?

  Hello

  Given that Windows Me is a one off sale product, Microsoft does not support Windows ME, and Microsoft does not guarantee the changes made to the system.

  However, you can try to run the SFC (System File Checker) scan on the system and check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  I suggest you to upgrade your system to get assistance and support.

  Taken Windows XP supported upgrade paths

  http://support.Microsoft.com/kb/292607

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• My wife can not enter his hotmail or windows sound live. This is the same password that can she do?

  My wife can not enter his hotmail or windows sound live. It's the same password, what can do?

  http://.login.live.com enter the email address and choose a password!

• The software you are installing has not passed Windows logo testing to to verify its compatibility with Windows XP. (Tell me why this testing is important) IM TRYING TO INSTALL A M-AUDIO FAST TRACK PRO.

  I am installing a M-Audio Fast Track Pro. It is a USB Audio Interface that allows me to record music. In the included installation, it gave me instructions to update my driver, so it might work. I installed and ran. But when I clicked on the button run the message about Windows logo test appears. The minimum requirements for the installation of the M-Audio is Pentium III 500 MHz with 256 MB of RAM, Windows XP (SP2), Direct X 9.0 c and a USB port. I don't know if it's relevant to my question, but I'm also not how do I know if I have fulfilled these conditions. I'd appreciate any help you can provide. Please and thank you for your time.

  You can ask the manufacturer of the software with a signature digital signature that will pass the Windows logo test, but probably do you. Ignore this message and install when even if your computer meets the requirements. Click here to find you info: start, help and Support, computer information, tools, My Computer Information, view general system information on this computer.

• Help with Windows Sound Recorder

  I was using windows Sound Recorder and I went to save the recording, my windows unresponsive and I lost the file. Is in any way to recover that?

  Hi Martin2222222,

  If you weren't able to save the recorded sound before you receive the error message, I'm afraid, you can't retrieve the recorded sound.

  See also: troubleshoot audio-recording