no wireless adapter found windows 10

Similar Questions

• Impossible to activate the USB Belkin, f5d8055 wireless adapter in Windows 7

  I have an old Dell Laptop Inspiron 6400 PC I installed Windows 7 Ultimate on. The built-in wireless adapter works well, but I would like to use an external Belkin F5D8055 N + USB adapter for inclease & range performance.
  So far, I installed the drivers for the correct adapter on the Belkin site and they seem to install correctly. The adapter is recognized and no error display in Device Manager.
  If I disable or uninstall the integrated Dell wireless adapter and try and turn on the Belkin adapter, while the message displayed indicates that it allows, the adapter is disabled and grayed out. I even turned off the Dell Wireless card in the bios that actually no difference.
  I know that the adapter Belkin F5D8055 working as I tried to install it in another laptop (Lenovo) and it works OK.
  My question is what could be causing the adapter Belkin to stay disabled? Is this something that is that collide with the Belkin drivers?
  I find a second laptop Dell Inspiron 6400 with the same generation and has the same symptoms with the Belkin adapter.
  I also tried a former C and W USB wireless adapter and it also will not help.
  Is there a fundamental issue with computers Dell laptop, Inspiron and Windows 7?

  Any help would be appreciated.
  Thank you very much

  Hi Zach, you are quite correct! I have now uninstalled Zonealarm and the Belkin adapter install and activate OK. Thank you very much.

  Do you know if Zonealarm can be configured to work with the Belkin adapter, or is it one or the other?

  Thanks again.

  Unfortunately, it's going to be one or the other, try to reinstall.

• Wireless adapter for Windows 7 on 15-e180nr

  Recently, I switched from Windows 8 for Windows 7 Home Premium (64-bit) on my Pavilion and finds it difficult to get the driver for the adapter wireless for it. System recovery is not good, and I've already tried three different drivers:

  sp54972, sp57538 and sp56154.

  The problem is when I go into devices to see the network map, information is "unknown", so I have no idea of what the manufacturer-specific device / I'm still in trouble. Can someone help me figure out what driver to use? I got the ethernet, but really need wireless work.

  Model: 15-E180NR
  Product: E8B21UAR #ABA

  OS: Windows 7 Home Premium 64-bit

  Thank you!

  Hello:

  According to the list of parts below...

  http://PartSurfer.HP.com/search.aspx?SearchText=E8B21UAR

  You need this card wireless driver...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_134477_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Cannot turn on Atheros AR928X Wireless Adapter in Windows Vista Edition Home Premium g71gx rx05 with F50SF MB

  Hey so I know this post is old and likely dead but I have the exact same kind of problem he described above, and patches replied did not do anything. the wireless card, I have however is a network adapter atheros AR928X running on windows vista 64 bit on an asus g71gx rx05 wireless. I can't real tech help because the windows sticker I became unreadable on certain parts of the code, so I can't get online. help would be appreciated.

  I had this same exacct problem and I fixed after constant trial and error by reinstalling the (ASUS Wireless Switch (Wireless Console3) utility) http://support.asus.com/download.aspx?SLanguage=en&m=G71GX&p=3&s=136&os=24&hashedid=j9EAEJubYZtCZDcP 3.0.11

• Question about the USB wireless adapter for Windows XP

  I'm trying to set up a wireless connection for my desktop pc with Windows XP. I don't see any options for a wireless connection. A USB adapter would do the trick? Looks like the easiest option.

  For a desktop computer with Windows XP, there was probably no built-in wireless card. Some systems Windows XP later had these as optional.

  You must meet your Dell model.

  A USB dongle should work, but make sure there is a Windows XP driver on the suppliers Web site before you buy. Windows XP has reached its end of life and is no longer supported by Dell or, more importantly, Microsoft. Be careful with the continued use of Windows XP, especially if the connection to the internet.

  You can install the unofficial service pack 4 before you connect to the internet which will help a little:

  

• Windows stops my USB wireless adapter when it turns off and it does not recognize when it lights.

  I have new Dell with router Linkys, linkys Wireless USB adapter, - have had this same problem with other adapters, routers and windows XP.

  Wireless USB adapter works fine until the computer turns off during the night. When I turn on, cant' find internet b/c "no wireless adapter found" I disconnect, then reconnect the usb wireless adapter and it works very well.  I do this every time?  Is there a fix for this?

  Hello

  When you say "turned" off tell you off, or let go the day before?

  http://support.Microsoft.com/kb/928631/en-us

  Jack, MVP-Networking. EZLAN.NET

• Wireless adapter loss connections access after opening a browser

  Watch a few weeks ago, I noticed that the wireless radio option 'would disappear"of the Fn + F5 and tries to connect to a wireless network in the dial-up connections would be error with the error 'no wireless adapter found. '

  I've updated all the drivers, uninstalled, reinstalled in order, as suggested by other messages, but I think there is another problem. If I do not open a browser or Firefox, IE, AC works fine and the radio always wireless option appears in Fn + F5. As soon as I open a browser, wireless radio goes. I stay connected is not a problem, except when I want to connect to a different wireless network, or, if I get dropped for some reason any and need to reconnect. Then, the only option is to restart.

  I enabled the logging option and the only thing I could see was an error message disappears from the radio wireless around the exact time. This is the error message:

  ERROR AcSvc (SYSTEM (Prvlg).4056.2180) [1/3] 08:34:31:109 AcOidHlpr::GetOidValue: SetMacFileName() failed!

  Any suggestions?

  Where can I say Lenovo to solve this problem?

  Thank you.

  Update: if I create a new profile, it is not a wireless or a wired adapter - switched only modems...

  Problem solved--apparently this is caused by the Google Latitude gadget, I have installed on my iGoogle homepage. He took off and now all is welll...

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Omni220 - 1135a: Broadcom virtual wireless adapter not Compatible during the upgrade to Windows 7 to 10

  Error verifying upgrade compatibility of Windows 7 to 10.

  Virtual not showing Broadcom wireless adapter is not Compatible:

  

  My computer got the latest driver Broadcom Wireless Adapter (2010-11-22 5.100.82.33)

  HP has communicated with Broadcom to provide a compatible driver Windows 10 on Windows 7?

  Later, I turned off the virtual card Broadcom wireless and found that I could still use WiFi, I went and updated to Windows 10 level in any case. Virtual map of wireless Broadcom comes off the list in Device Manager, but I can still use the WiFi without worrying.

• HP Envy M4 1115dx: Qualcomm QCA Atheros Driver Installation error | Device not found wireless adapter

  I just replaced my old HD with a new SSHD Seagate. Everything is going well until I tried to connect to internet in wifi wireless mode with. I think it was a pilot error because I just do a blank Windows 8 install on my new SSHD (hybrid drive SSD). So I went to find the Driver for the WLAN Module.

  HP is automatically detected my laptop model number and gave me a list of drivers. I selected "Qualcomm Atheros QCA90000 series Wireless LAN Driver for Microsoft Windows" under the list of Driver Network in the menu dropdown.

  In the middle of the installation of this driver, I was arrested and met a titled error message, "802.11a/b/g/n Wireless adapter device not found". Just below this title was a big red circle with a white X sign. Besides, he said: "the device may not be present or could have been ejected unplugged from the system. Abortieng the installation, please insert the card and try again the Setup program. »

  Below is a screenshot of what I mean.

  

  Problem solved. I uninstalled all the drivers but the Ralink. Think I know what may have caused this.
  
  The recommended for WLAN driver was based on a misinterpretation on behalf of HP. HP auto detected my laptop as a 1150la instead of the 1115dx model.
  
  I'm not sure why HP thinks that my model is another, but it may have something to do with the SSHD and thermal fan replacement I did before this error WiFi.

• wireless adapter past quickly and continuously between good signal and found fitting

  NETGEAR WG111v3 adapter

  Windows XP without service pack
  Had to restore XP and since the re installation of the wireless adapter it will then always back and forth between the excellent signal strength and no link found.  This action stops ever and there are 2 seconds between each switch.  Anyone can help with this problem?

  Hello

  I suggest you install a service pack on the computer.

  You can check the link below: how to obtain the latest Windows XP service pack: http://support.microsoft.com/kb/322389

  After the installation of the service pack if the problem persists, you can follow the steps from the link below:

  Wireless connection network in Windows problems: http://windows.microsoft.com/en-US/windows/help/wireless-network-connection-problems-in-windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

• Wireless adapter installs - is msg not found wireless adapter and the adapter never turns on.

  HP desktop system

  Windows Vista

  Router DLink and compatible adapter for Windows 7

  Inserted the disc and MS for installing drivers appears

  Microsoft window pops up saying: these data are incorrect.

  Install the drivers updated the site Internet DLink and still wont

  SE msg not found wireless adapter and the adapter never turns on.

  Hi JRKellison,

  1. What is the model number of the router?
  2. What is the full error message that you receive?
  3. This is the first time you install it on the computer?

  Check and make sure that the adapter is properly connected to the computer.

  I suggest that you try to install the driver using compatibility mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• -SOLVED! -PCI or USB wireless adapter is disabled and will not activate on Windows 7

  The solution: uninstall ZoneAlarm!

  I spent 3 days and 3 different cards, trying to solve this problem. First of all, I bought a Netgear PCI wireless adapter. Installed according to the instructions. Device Manager showed the adapter works properly but turned off and nothing I tried would enable the adapter.

  NETGEAR has taken over to the store and buy a Linksys PCI wireless adapter. Exactly the same problem. Device Manager, said the adapter worked correctly, but turned off and would not turn on.

  So I called Linksys support and paid them only for the remote service and they couldn't get it to work either (of course to return money). They suggest is to contact Microsoft technical support or buy the USB version.

  I went and picked up the USB (WUSB600-N v.2) version today and guess what? Exactly the same problem. Device Manager showed the device works correctly, but turned off and would not turn on. After talking to a few other technicians in addition to myself, we agreed that the only other option was to reinstall windows. But just before I decided to do, I checked one last time to Google and came across a post in the forums of Vista by someone who had the same exact problem, uninstalled ZoneAlarm and then worked their wireless adapter.

  Well, I decided to try that before reinstalling windows. As soon as I uninstalled ZoneAlarm and the computer restarts, the adapter has been activated and automatically found my network! This means that ZoneAlarm control network on the computer and for some reason cards some not allowing a wireless adapter is enabled.

  Then I tried to re-setup of ZoneAlarm. After that I have re-installed, my wireless adapter became instantly disabled and would not turn on again. So I uninstalled ZoneAlarm at all times. My router has SPI and NAT firewall on top of the Windows Firewall, so I need anyway ZA.

  If you have ZoneAlarm, get rid of it. If you still experience the problem of your card activating Wireless does not and have ZoneAlarm, try to uninstall any firewall software 3rd - party that you have already installed (not the Windows Firewall).

  I was really frustrated after spending 3 days with 3 different adapters and many trips to stores using the adapters and buy different cards. I'm glad I found this post on the forums of Vista, so the credit goes to the one who made this post.

  On a side note, after I installed the drivers from the CD and Linksys site, Windows update has shown there is an updated driver on the site of Ralink which I installed it and so far no problem. My WUSB600-N automatically connected to the strip of the 5 GHz on my router dual band and speeds are ultra fast and signal is strong in a completely different room.

  Hope this information helps others finally solve this problem.

  See you soon,.

  Matt

  64-bit, but it should work on either. ZoneAlarm includes network connections and was not what allows the adapter to be activated. Even close ZoneAlarm does not work either. ZoneAlarm must be uninstalled from the card must be activated.

  Vista drivers work fine with this adapter. Then a Windows Update is the updated drivers for Ralink which also work very well.

  If you have properly installed the drivers and display device manager the device works correctly, but disabled, and then uninstall any firewall/antivirus 3 rd-party should do the trick.

  I am a tech, more I consulted other technicians as well as paid for technical support of Linksys and nobody could understand this problem and it's no wonder. Who would have thought that ZoneAlarm or any 3rd part antivirus/firewall software would take complete control over network connections and not to allow a new network adapters must be installed correctly.

  If anyone needs any help other than that, feel free to ask.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• wireless adapter keeps blocking down is my grilled adapter windows guard resetting, but it always stops

  My keepps wireless adapter window line to hit me back it but after a few minutes I connection loose again what is happening

  Hello

  ·         What operating system is installed on your computer?

  ·         You did changes to the computer before the show?

  Method 1:

  I suggest that you put the computer to boot and check for the issue:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer back to normal when you have completed troubleshooting by following step 7 from the link above.

  Method 2:

  I also suggest you to remove the security of the wireless network and check for the issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Note: Make sure to put the protection of the security on the wireless network when you are finished troubleshooting.

  See also: http://windows.microsoft.com/en-US/windows-vista/What-are-the-different-wireless-network-security-methods