Noisy GIS 3337

Similar Questions

• irreversible bios update made noisy fan (8710p, 8710w, 8510p, 8510w, fan, F.20, F.0E)

  Hey.

  I just want to share my experience with the update of the bios on my computer hp 8710w laptop and talk to HP support. I've updated F.0E to F.20 and after that this fan went wild. In windows 7 it works very well every boots 2 / 3, or more. All fans of time runs fast, no matter what the system load and temperature are. What makes the portable noisy.

  I used to use linux and it just fan slow down after spinning up to cool the system. It is really something that you want to have, because it becomes a noisy vacuum cleaner with an excellent machine and quiet.

  I have enough evidence to assume that the problem was caused by the update of the bios. First of all, it started exactly after the bios update when nothing else has been changed. Secondly, 5 years ago I had a very similar laptop (8710p) and when I have updated the bios to F.0F, it's the same thing, but I fortunately downgraded the bios and everything was back to normal. In addition, reported others on the internet and these discussion forums.

  Now with the update of F.20... There is no way to downgrade. It's embarrassing: HP has released a update this feature breaks... and there is no way back (except the replacement of the card system, which is expensive for laptops out of warranty).

  I was the cat and then talk on the phone with HP support. They are not really very close to professional. First, they said that my windows 7 is not officially supported and should I install xp or vista. I have xp installed specially for them, and which consumes a lot of time. Of course, nothing has changed. And they actually all drivers for windows 7...

  The best advice of hp support has been trying to install all previous versions of the bios. I reported a failure on each one, then only, they found in the description of the version F.20 could not be downgraded. After reading the forums here for 15 minutes, I knew much more technical support on my laptop and the question, lol.

  After talking with me for a time very long (like 3 or 4 hours) and say that I try to restart my machine, or start with the Windows key + b, etc., they said that my laptop is out of warranty, and there is nothing that they can help me with.

  I confess that the laptop is out of warranty... but only suffers from the update of the official firmware that cannot be downgraded. Yes, I know I'm supposed to buy a new replacement HP laptop. But... This look bad.

  Now, I'll get a replacement bios chip, programmed with the previous version of the bios and soldered to the motherboard...

  Hello to the guys at HP support. They are nice people who try to be useful, they don't know anything about their products :-)

  Hello programmers to the HP bios... Please... Please be better, please learn that bugs can be corrected.

  Problem solved! :-D

  I downgraded to F.0E

  Find a difference in the photos below:

  BEFORE:

  

  AFTER:

  

• TOSHIBA MD04ACA400 quite noisy HARD drive work

  Hola,

  A few days ago, I noticed that when the PC is idle, after about 10 minutes the hard drive start work quite noisy , moving the mouse makes the sound stops.

  I have:
  -10 Windows
  -TOSHIBA MD04ACA400
  (HDD, Guardian)

  Thank you.
  

  There is a waiting period until the PC will start a thing of maintenance, which is very likely to be what it is, considering that it stops it again when you resume activity.

• Noisy fan on model Satellite U50T-A

  Someone told me everything resolves to a noisy fan? I have upgraded to Windows 10 but has had this problem before. I've tried the settings mode eco but fan still works in the background without the computer that is running hot.
  I saw the previous posts on this issue, but he does not seem to have solved easily and turns into a game works.

  I have BIOS version 1.10 but don't really want to mess with upgrades as they also seem to cause problems.
  No miracle solution would be great that this whirring noise leads me into the wall.

  Have you tried to change cooling option method in advanced power options?

  Usually this should reduce the activity of fan cooling.

• Satellite Pro P200-15W: after Bios Update 1.90 incredibly noisy fan

  Hi, I have a Toshiba Satellite Pro P200-15W, I recently made an update to BIOS version 1.9 and seems to have been a big mistake.
  After restarting the computer, I had a lot of software deconfig and the fan has become incredibly noisy.

  I have the problem with the Toshiba Vista registration software, I get this message: "registration of Vista has stopped working". I read other discussions, I don't want to just disable it in the start.ini file, I would actually solve the problem if there is a way.

  Is there a way to change the configuration of fans? I read a post from Toshiba on another model of laptop that has had the same problem of noisy fans after an update of the BIOS, they gave that a solution with a new version of the BIOS, is there a way to reverse the BIOS to the previous version? (recovery CD will be useful for this purpose)?

  See you soon

  Edgard

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive.
  The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software as "Vista record"!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Noisy fan with 10 Windows using Portege Z30 - B

  I have my Toshiba Portege Z-30 b for the last 7 months. He received with Windows 8 pro. installed, all played very well. I have upgraded to Windows 10 about 5 months ago, after the upgrade, the fan ran constantly at a high unacceptable noise. Toshiba service replaced the fan - no result. I have been informed by the service to install the utility 'eco' - done. No results. I was informed by the service don't upgrade to the latest version of the Bios - done, no results. The noise is there in case of station dock, here in the position "charge" and there when it is on battery. I seriously consider to sell and move to the Lenovo or Dell. Anyone has any advice?

  Check thread is: https://forum.toshiba.eu/showthread...-117-noisy-fan
  It is more than 1 year... and still no good solution.

• HP photosmart AIO 7525; noisy and too long to print

  HP photosmart AIO 7525

  connected to a HP windows 7 64 bit

  It is my printer 2nd in 2 months (same model # from the same store).

  First, I went back to scratches and that I could not solve the problems of alignment.

  This, it is extremely noisy; It takes a minimum of 50 seconds to even begin printing, looks a keurig coffeemaker, and it continues to operate after the print job. Looks like it's lining up or clean the printhead everytime

  Initially, it would not connect to web services; but after 2 hours, I got it to work.
  In printing a page of a web page, the only thing that printed was clearly the company to the top, the page number, address date and files below. All him rest isn't clear (like the rest) and the characters are shredded and not aligned.

  Any help on these questions or I am going back this one too?

  Thank you

  No, it does not.

  the update does not apply to my system

  Win 7 64 bit

  I think I can just return it too

• Fan of extremely noisy satellite A300

  Hello

  My fan was working perfectly and out of nowhere it extremely noisy without reason and kept the laptop stop while playing every 30 minutes.

  Then I opened the laptop to clean the fan and it is 100% clean.
  After closing, the fan was still extremely loud, but now, the pc was also extremely slow.

  What could have touched at the opening of the PC that made him slow xtremely and what could be the problem of fan?

  Hello

  There are different reasons for noisy fans; dust and debris that prevent the cooling system of rotation correctly or a malfunction of the cooling module.

  I read in your other old thread, as your A300 cut during the game.
  Generally, this is caused by the high temperature.

  Maybe your cooling modules did not work properly and therefore the temperature rose.

  I can only speculate, but can your cooling modules must be replaced.

• Satellite C650 / 01 M noisy fan

  Hi all

  This is my first post and first experience with Toshiba laptops: D.
  So here's the thing, I bought Satellite C650/01 M a few days ago and I noticed that the fan is a bit noisy, it's like a "Bee noise" or "House sound fly" lol, but the temperature of the computer is fine.

  So I'm wondering if this is normal or I have to return it? Any experience with this particular model?
  BTW, here is the link of the laptop:
  [http://dicksmith.com.au/product/XC8927/satellite-c650-01m-notebook]

  Thank you!

  Hey,.

  I Don t Satellite C650, but normally it should be possible to change the method of cooling Windows Power Management. You can change between optimized battery and a maximum Performance.

  I put the battery optimized option and this reduced the activity of the fan and the cell phone was much quieter. :)

• Noisy fan on Satellite Pro A100

  I bought this laptop last year Oct and it seems a bit buggy now. Sometimes the system just hang out like that... I was surfing at halfway and the system just block without reason. I haven't run any software... It is rarely happen, but it happened to me 3 times. I tried to restart and I can't. When I press the power button, the fan works but the screen is still black. I need to move it works for several times manage to turn it on.

  Nowadays, the fan is really loud. I have no idea why it happened. I check the fan and there is no dust or whatever it is stuck there. I do not know how to open the case because it seems to open any advice don't manage to control the fan. I can't sleep at night because the fan is too loud. I changed the settings to low performance, but it's always noisy.

  Hello

  Wait you said you can't sleep because of the sound intensity fan hmm makes the laptop run an all night long?
  Sorry to say but more often during this long turn the processor and other parts inside the laptop produce a lot of heat and it must be air cooled.

  But I wonder about the laptop hung maybe this problem is software partner and in this case, you should first try to redefine the operating system on the factory settings.
  Install the OS from the recovery CD and check if the laptop can run successfully

• very noisy fan

  very noisy fan does not stop

  Reset the SMC.

  Barry

• Noisy fan Portégé Z30-B-117

  Hello

  I have a problem with my new laptop Portege Z30-B-117,
  He really noisy fan, I was forced to use battery saving mode, without which I can't work on this machine.

  The fan speed is absurdly designed.
  There are a lot more speed, even when it does not heat.

  Please make a new bios with the smart fan speed, then it will be the best phone on the market!

  Thanks in advance.

  Sometimes the fan activity would increase where the processor is loaded by some background process.
  I've had the laptop from another manufacturer and the fan speed was high due process that runs in the background. From time to time the process has locked the CPU (up to 80%-90% of CPU usage) and during this time, the speed of the fan was very high.

  I spend a lot of time to learn about this process, and finally, I discovered that my antivirus software (it was Norton) the CPU load. I switched to Avira and Avast and this question doesn't seem anymore.

  However, I guess that the CPU could be occupied as a result of any background process

  By the way: you're right: BIOS contains fan table and this table fan gives indications how to control cooling modules. But the fan activity depends not only on the BIOS as I said above: background as well as the CPU processes affect the speed of the fan.

• Portege Z830 - fan noisy and almost always running

  My new Portege Z830 has the issue of noisy fan and almost always running which has been said here before.

  Recommendations were that we download bios 1.6. But I checked and that the version is already installed on my machine. I also adjusted the power save mode battery parameters as others have suggested. But that made no difference,

  All the other tips has been give in technical language far this beginner.

  If anyone has any suggestions they might put in words of one syllable and the step by step instructions, I would be eternally grateful. Thank you.

  I found also two documents from Toshiba on exactly this topic and as saying that update BIOS version 1.60 or higher would solve the problem

  Portege / Satellite Z830 high cooling fan speed.
  http://APS2.toshiba-tro.de/KB0/TSB23039P0000R01.htm

  and

  How can I improve the control of the FAN on the Satellite and Portégé Z830?
  http://APS2.toshiba-tro.de/KB0/FAQ22039H0002R01.htm

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• Camileo SX900 photo very noisy

  Hello

  I just buyed a SX900 camcorder.

  All right, next to the fact of the camera specifications seems very noisy even in daylight on a room lit not so high...

  I'we used both level ISO Auto or manual (like 800) with or without LED activated.

  Is it normal? I want to say I am very disappointed by that, because I took the camera for most due to fact was "announced" as works very well even in low light environments...

  Hello

  I think it's normal.

  I have another camcorder to another manufacturer and the quality of the image is lower when the lighting conditions are not so good
  But the image quality is very good in daylight.