Noisy scanner needs lubrication?

Similar Questions

• My printer squeeks when the impression as if it needs lubrication. Caan do some lubricating it myself?

  My printer squeeks when the impression as if it needs lubrication.

  Can I do a lubrication myself?

  Hi there mowgli2,

  This article should cover the noise you are experiencing. Give a procedure and tell us if it helps. As with any wireless issues try this article in order to maintain a stable wireless connection.

  Good luck!

• Satellite A135-S4666 - recovery disk displays an error message

  The hard drive crashed while I replaced it. I am trying to use the recovery disk to take the computer to the "out of the box configuration.

  I chose to 'recover' rather than erase the hard drive based on this choice. Then it copies the files from the first disc and pushes me to the second. After putting the other continues to copy files. Finally, she moves more to 'recover now' she does and seems to be using the hard disk newly installed something between 35 and 50% of the task. At this point, I get an error message stating "error recovery" and invites me to press ok to shut down the computer and spits out the CD. The error message is coded 10-FC12-0002. I tried 4 or 5 times with the same result.

  Am I supposed to use disc erase first, and then use the recovery mode since it is a new hard drive? Or I have a defective recovery disc?

  Any comments or ideas would be greatly appreciated, I do not get the case at this stage.

  Hello

  It's not easy to tell if it s a recovery disk problem or if the new HARD drive is the problem. Have you tested a Microsoft disc for example? If the disc of Microsoft is, it seems that your recovery disc is noisy and needs to be replaced. Otherwise the new drive HARD cause this problem.

  Check this box to determine the cause of this problem!

  Good bye

• Horizontal color lines scan 8500 fn1

  We just bought the scanner and it shows horizontal lines on scanned documents, the scanner needs to warm up?

  Without a doubt, this is hardware problem. I guess that this device is under warranty, so please consider ASP from nearest HP or the one who sold you this scanner. I'm pretty confident that the repair is necessary.

• Scan slides to a hp photosmart mac 7510?

  I don't think there's a way to digitize slides to a mac at a photosmart hp 7510?

  No, not really.  To scan transparencies and negatives on the scanner needs a backlight behind the media to project the image on the scanner.  The scanner on your printer has only a white sheet behind the scanned images, so this won't work.

  There are several manufacturers that offer scans of slides or negatives for less than $200.

• Redirect to Bluetooth with Imprivata

  We extend VDI environment and at the same time we have implemented Imprivata in the mixture.  We have a bunch of mobile stations that will travel between the rooms of patients who have handheld scanners attached to them.  I tested on a laptop with the latest version of the client and the view and the redirect seems to work perfectly.  However, the seller is through use of Imprivata is able to use the 5.4 view client.  Redirection works on this version, but the scanner needs to configure whenever it opens a new office.  Requiring a sweep in the code for the new office and we cannot have users doing this every time.  Was curious to know if it is a certain type of work-a-round which would correct this problem.  Questions or comments are welcome.  Thank you

  P

  Hello

  no answers yet - more facts...

  When you talk about redirect - it is correct the scanner USB redirection?

  Can you explain more in detail what this means: "the scanner needs to configure each time he opens a new office.  Requiring a sweep in the code for the new office.

  the problem ending usb drivers is installed each time that a user logs on? or...? I don't really understand what is happening here.

  If the user must "scan in a code" - where they do this and in what app do they do? That means that the app and then do - write some registry keys?

  Is the problem that a specific device (serial number) gets associated with a desktop computer, so that a user installs between the rooms (but newspapers in the same office) given is a different scanner each time she so needs registration?

  I would like to know a little more in detail. At the present time, my intuition on what is something that you should discuss with the supplier of scanner app - if they are demanding devices to be registered by the office. There may be a way to register beforehand all devices on all desktop computers...

  in any case, provide a little more info and I'll see if I can offer suggestions

  see you soon

  peterB

• Need help with Toshiba e-STUDIO4520C printer/scanner

  I don't know if it's the right thread poster in for questions on my Toshiba, photocopiers. If this isn't the case, please redirect me.

  If have a TOSHIBA e-STUDIO4520C Copier and so far I love it. The problem, I'm trying to fix is with scanning.
  I need to go in a folder not only a file scans. In this way we can install multi-page scans that do not get confused with other analyses. How can I do this?

  My second problem is that some pages are laid out and I need the scanner to do an auto rotation just for these pages and not the portrait. Our scanner HP for this, and I guess he made a fast OCR to determine the orientation of the page. It is a function that I'm just missing or is this something that may be in the works? Currently, there seems to be a setting all or nothing.

  My last little problem is Fax. The copier supports the cover sheets, but there is no possibility to import a Word, PDF, or a standard document cover sheet; so that we can cover sheets which include our logo and letter head on them. It is a feature I am missing or is it ongoing?

  Thanks for any help.

  Jim Flagg
  Chief Information Officer
  Building of the Department of fire and safety

  Hello Jim

  Please don't get me wrong, but it's computer Toshiba support forum. So I think this isn't the right place for your question, but maybe you'll be lucky and someone will be interested about your question.

  Maybe you should contact your local dealer or the company where you bought your Copier. I presume that they have good experiences with the products they offer for sale.
  Good luck.

• I need the scanner for hp officejet 4215 for the use of scan software

  I need the scanner software for hp officejet 4215 for the use of scan and when I press the scan button on the printer know any software to scan function.

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=351106

  Kind regards.

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• repair Windows XP registry needed. (windows live care scanner errors found but will not fix them)

  I am running Windows XP with IE 8 and Norton 360. I do updates regularly and also use the Windows Live One Care Safety Scanner. Each Analyzer detects a problem sometimes, and fix it. The Windows tool still found some problems in my registry and fixes some but not all. I'm still running a slow processor but there are times when the hard drive starts to crank and system enters a State bound upward to do something that takes forever and finally unlocks. If I look in the Task Manager, it is usually System Idle Process and ccsvchst.exe which is cranking up the numbers in the use of CPU time CPU and MEM. I have also a ton of svchost.exe running. I would like an easy way of fixing and removal of registry problems and then making sure the running processes are legitimate and not set not a priority as they seem to be. Thank you.

  If you have a problem with ccsvchst.exe, you do not have a problem with XP - you have a problem with Norton and it has long discussed performance and ccsvchst.exe problems accompanying the Norton forums.

  No single AV tool seems to know everything and Norton is whatever is not because your system is not infected.  It simply means that Norton doesn't find anything he knows.  If all goes well, you use more than one tool of analysis, but not more than one both if there is a real time involved protection they'll get in the way of the other.

  In some reviews, Norton has a reputation as one of the most famous system CPU and memory hog on the market - you could not picked up too more than AV tools with a more unfavorable reputation in this area, but some people really seem to it.  I think it's too fresh generals.

  You can temporarily uninstall it (using their special uninstall of course), reboot and see how your system works without him and then decide if keeping it is 'worth it' or consider broadening your horizons AV a bit.

  You can find out exactly how long your system takes to start down to the tenth of a second and determine exactly how long each process takes to start and then decide what to do (as opposed to guess).  For example, I know that my system takes exactly 28,03 seconds to start.

  When you see a report and a chart of your startup process full of one end to the other, it's more revealing and informative.  If you want to do this, we can tell you how.

  Unfortunately, the forums MS Answers don't ask not even basic on a system information when a new question is asked, so we know almost nothing about your system.

  If you want to talk a bit, follow these steps:

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  You can also take a screenshot of your task manager or process and post it for review and analysis (there is an example below).

  This is my standard copy/paste on the way to understand the multiple svchost process (what a ton of them means to you) that you see in the Task Manager:

  You may be able to get clues with what is happening with your svchost process using the Task Manager and maybe understand.

  You will always be able to understand what is happening with your svchost process if you use Process Explorer.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

  It is OK and normal to have several svchost running processes.  Important XP Services are actually runs under the svchost process. There are sometimes an XP Service that runs under a svchost process, sometimes there are several Services in XP, which runs under the svchost process.

  Sometimes malware will hide behind a svchost process because the malware knows that you won't be able to find it in the Task Manager.  He will hide behind a svchost.exe process to deceive you, but you can outsmart it.

  Malicious software can disguise itself also seems to be a legitimate process of XP or he could hide under/behind other processes that you see running in Task Manager if you can't see the execution.

  The malware would trick you into thinking you must use a System Restore Point, run a repair install or reinstall your XP from scratch when you really don't.

  Looking at the display in process Explorer, you want the CPU most to be associated with the system idle process.  It's 'free time' on your system, so more time there, more free.

  If you look at the graphs of performance and see red spikes (or not) double click the graphic in the upper left corner to display the graph to use.  Move the mouse over any pics to see what are the causes.  Even if the Spike has already scroll screen, you can still move the mouse over the edge to see what caused.  You can also just wait for a pic to happen and then see what caused the Spike.

  To help understand your process svchost and what is running under them, read this article and you will be smarter than the average bear:

  http://www.bleepingcomputer.com/tutorials/tutorial129.html

  Then with a few Google searches, you can watch every thing running behind your svchost process and Process Explorer and see what it is and decide if your configuration needs it or not and then decide what to do about this.

  If you think you have a svchost.exe process amok, run using Process Explorer, you can right-click that offensive svchost, properties and on the Services tab and son, you can see which runs under it.

  There is a CPU column it will expand (make the wider column) so that you can see CPU.  Maybe you can spot what background process is so CPU consumption under the svchost.exe process.   Stroll under the svchost process and you will find the problem.

  You can also see what is running under each svchost simply by pointing your mouse on the svchost.exe process.  Some of them have just a things working under them and some will have several things (I hope that all the legitimate XP services) and some will have a lot of things.

  If you have a svchost process that is afflicted, which runs under your afflicted?

  No running process must defy reasonable explanation.

  First, see what you can find using Process Explorer, then if nothing is obvious, additional advice.

• Need a download for a Navigator EX scanner driver, for a MX870

  I recently had to restore my system Windows 8.1 as a result of a hard disk failure.  I used to have the pilot Navigator EX for my MX870 multifunction printer/scanner, but even though I have re-uploaded the MX870 driver package, I can't find the driver for the Navigator ex scanner

  I tried a number of downloads, but nothing.

  Anyone have any ideas?

  Thank you, Walt Culver

  Hi WaltCulver,

  The latest version of MP Navigator can be downloaded from the site Web of Canon USA. Please click here to access the page drivers and downloads for the PIXMA MX870.  Once on the page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" field is correct, and if this isn't the case, please click on the drop down menu to select your operating system. Please note that you may need to scroll upwards or downwards in the list to select your operating system.

  2 Please click on 'SOFTWARE' box, locate the MP NAVIGATOR program file, and then click SELECTION button to the right of the file name. When you do, a dark gray DOWNLOAD button appears; below, a CheckBox appears asking you to accept the terms of the waiver to continue the download. Please click on this box to accept the terms. When you do, the dark gray DOWNLOAD button lights in red. Please click on the button DOWNLOAD now Red; the file will start downloading. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the file, please double-click the file and follow the prompts to install the software on your computer.

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• Need driver for scanner BenQ s2w 5000U will run under Win 7 and XP

  Need driver for scanner BenQ s2w 5000U will run under Win 7 and XP

  original title: software

  Autour Googling I see that several pilot sites offer Win98, NT, Win2k, XP drivers for this very old scanner. Be careful when you use pilot sites and do not click on ads or links that say to search for drivers. It is unlikely that this very old scanner will work with Win7. Better to buy just a new scanner that will take in charge Win7 and XP. MS - MVP - Elephant Boy computers - don't panic!

• I need help for my printer/scanner/copier to work with my computer

  I have a problem for my computer to connect with my printer/scanner/copier.  I need help!

  Hi GraceEverts,

  ·         What exactly happens when you try to connect printer/scanner/copier to work with my computer?

  ·         You receive an error message?

  ·         What is the brand and model of the printer/scanner/copier?

  I suggest to check the following items and check if it helps.

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

   

  To install new or updated printer drivers to update

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  To install a scanner or digital camera

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/scanner_camera_add.mspx?mfr=true

  Hope this information helps.

• Need drivers for scanner Canon FB630U

  Hello

  I'm running win7 64 bit.  I have a Canon FB630U scanner.  I got it for many years and it works very well.  However, I need the drivers for it for win7 64-bit.  Canon website shows that the drivers for XP, 2000 and 98.  Is there a chance/hack that I could do to make it work in Win7?
  I hate to throw a scanner perfect condition just because there is no support driver.

  Thank you
  Tim

  Hello Timmy 2 beers,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Thank you for visiting the website of Microsoft Windows Vista Community.  The question you posted seems to be hardware related. Unfortunately, we are unable to help with changes to the hardware.  Please contact the manufacturer for assistance.

  Drivers are created by the factory; Unfortunately, it seems that Canon will not do all the Vista drivers for this device at this time.  I would hold off on throwing the scanner because we don't know what tomorrow will bring.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.