Why the pallets are moving downwards on the 2nd monitor

Similar Questions

• Non - generic pnp on the 2nd monitor and no sound

  Original title: generic Non - pnp on the 2nd monitor

  • 2 monitors... Left (23 1/2 ")... Law (21 1/2 ")
  • ........................................ DYNEX... AOC ENVISION series
  • The two usually run on 1920 x 1080
  • With the help of the ATI Radeon HD 5700 series
  • Both using VGA adapters convert
  1. Turn it on one day and the resolution is all screwed up after using an Xbox on the AOC (AV HDMI cords don't transfer sound for me)<---- might="">
  2. Cannot repair resolution of VGA resolution (?) (1600 x 900, 1440 x 900...) due to the generic Non-Plug-and-Play monitor.
  3. System Restore - nothing
  4. Drivers switch autour using AVG and other versions of Radeon. -fucking nothing but resolution
  5. Re-plug-nothing
  6. Defragmentation (desperate after 4 hours) - nothing
  7. Restart for the 100th time
  8. The computer stops at 'Starting Windows' screen and stops at halfway through safe mode.
  9. F8 F8 F8 F8 F8
  10. 'Repair your computer' - nothing
  11. Connect to the computer through Tablet and update all the drivers - back to step 2 of this ti time sometimes shows generic Non - pnp monitor and sometimes peripheral display watch on: laptop display even if my 2nd monitor displays and able to react to what I put on it.

  Monitor AOC is shifted from 3/4 "(black margin on the bottom) and an uncertain amount to the left (no right margin)."

  trying to be as helpful as possible, I have a lot of work to do and CS work is almost impossible for me without 2 monitors to work please help, thank you.
  UPDATE! : I had no sound.

  Mike,

  Disable the LogMeIn driver from Device Manager and check. There are a few reported issues where LogMeIn driver has disabled the aero thus also changed the screen resolution feature.

  -Click Start, and then press on and enter type Device Manager.
  -Double click on graphics cards to expand the video drivers.
  -Right-click on the LogMeIn mirror driver and then click on disable.
  -Restart the computer and see if that helps.

  You can try to uninstall the video drivers and then install the driver from the AMD website as given in my first answer.
  Note: it is there no trouble uninstalling the video driver. When the video driver is uninstalled, Windows starts with minimum VGA drivers. The resolution of the screen (icons on the screen) may look bigger, but after installing the latest video drivers, the screen resolution will be back to normal.

  Please try the following steps and answer results.

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• the 2nd monitor resolution

  Hi all

  I'm working on an application that uses 2 monitors.

  I have a VI that measures the resolution of the screen.

  I want to know the 2nd monitor resolution.

  How can I get that?

  Thank you

  Ritesh

  You can use a property node application, the display value-> AllMonitors. Index of this with an array and ungroup the result. This will give you information on the limits of the screen. By subtracting from left, right and top to bottom. You can get the size of the screen.

• Windows Media Center captures the pointer of the mouse on the 2nd monitor when WMC window is enlarged.

  My mouse pointer is captured on the 2nd monitor when the windows media center window is maximized on this screen. I can return the mouse to the main screen when the window of the wmc is reduced.

  Hi ijeff:

  One option is to move the Media Center window on the second monitor, and then expand the window to fill as much of the screen as possible by dragging an edge to the outside.  You can fill most of the screen that also and always use the mouse on each monitor.  The other option is to try pressing ALT + TAB to release the mouse in the Media Center window.  I think that worked in MCE2005, but currently I don't have a dual monitor set up to see if it still works.  Good luck!

• Why the source monitor keeps a history of the clips?

  I can first coming from a background in FCP7.  I find it strange that the first source monitor keeps a history of all the clips that you have previously loaded.  Why does do this, and is it possible to turn it off?  I'm used to FCP, where a new clip from loading completely destroys everything that was in the front source monitor.

  The reason why I noticed, it is when working with sequences multi-cames.  Example: I'm playing a multi-clip sequence in the source monitor.  Later, I add a new angle.  The next time I play it in the source monitor, the angle is not there.  I have to 'close' and re - open in the source monitor to see the change.  This is disturbing, particularly because it does not even give a warning that "what you look reflects exactly the timeline."

  In fact, in FCP, recent clips are listed in a menu pop up, they can be charged in all at once. Avid has a similar function. Premiere Pro's better allowing you to scrolls with the next and previous command or go directly to the first and last clips. You can close all clips, but probably not exactly as you wish.

  Feel free to make a feature request: http://www.adobe.com/go/wish

  Here is a screenshot of the options so that you can create keyboard shortcuts:

  

• Cannot detect the 2nd monitor

  I set up a new hp PC Friday and managed to successfully transefer all of my old that wouldn't work for the new (reconditioned). This framework has been implemented to UltraMon and reuse 2 screens.  EVERYHING worked perfectly and I was able to work for the rest of the day.

  After coming back Monday morning, a single monitor works and I spent the last 2 days, looking at EACH side of managing this problem can be resolved and nothing helps. I contacted ultramondirectly, but that was no help whatsoever.

  It has been suggested that I might need another graphics card? If this is the case, how can I get one and solve the problem.

  Thanks to all those that are willingto help offer

  Since the second monitor worked once and now it does not work, it may be that one of the components has not or there is a bad connection.  Check the connection to the 4 port is secure and that the monitor is coming by trying it on another computer.  If these two is Yes, then perhaps the displayport to DVI adapter has failed.

• Win 7 is unable to detect the 2nd monitor at startup

  New install of win7 with ATI Radeon HD4550-PCI Express graphics card.  Running a 100th Mitsubishi Diamond Plus monitor and a Sony Multiscan 500PS monitor, both off the 4550 card.  At the start, the main screen (Mitsubishi) is detected and the second monitor (Sony) is not.  I can open the control panel for the resolution of the screen and see both monitors correctly identified.   If I choose to extend these displays, Windows re-labels as generic PNP monitor Sony and the Sony monitor then active and works correctly.  As soon as I turned off the computer and restart, the Sony monitor is still not detected and I have to start the entire process.

  I deleted all of the ATI drivers and reinstalled the current Catalyst drivers (8.732, 26/05/2010), as well as the current motherboard drivers.  (The motherboard is Gigabyte MA790GP-DS4H).  Integrated on the motherboard graphics is currently disabled, although it made no difference to the problem.

  Help!

  
  

  Hello

  Check with Support ATI, their online documentation and drivers, and their forums.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  Something may be wrong with the video card or drivers.

  -----------------------------------------

  These should help you put in place.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Photoshop CC window is black Uni on the 2nd monitor

  • What version of Photoshop? Photoshop CC 14.0 x 64
  • You have installed recent updates? Yes
  • What operating system? Mac OS X 10.8.4
  • What type (s) of the image files? Affecting the PSD files and jpg. Png no, those who work
  • If you get error messages, what is the full text of the error message? No error message
  • What you were doing when the problem occurred? Implemented new monitor.
  • He has already worked before? No and Yes, monitor is new, but I still Photoshop CS6 and works very well.
  • Other what software do you use? Right now: Chrome, HAVE, calendar, Textedit, and system preferences.
  • Tell us about your hardware. MacBook Pro 15 "Retina display (set to the parameter 'More space'), 8 GB of RAM, i7 2.4 GHz, 172 GB of free space on the SSD drive. The monitor is Hannspree HE225DPB 1920 x 1080 at 60 Hz
  • He has already worked before? This question has worked when he asked the first time.

  As I drag the window back between the external screen and my laptop screen, the previous state is displayed briefly. When I drag it to the external monitor, it seems ok for a fraction of a second in vertical strips that refresh for black Uni. Even when I'm dragging the window to the rear, the window remains black on my main laptop screen until it refreshes back to normal, in the same way vertical strip. The frame of the window, including the leaders seems ok, but the area of the image, including the color of the canvas to become black. This darkness can be captured in a screenshot.

  On the PNG that works, I get some black as the image is resized between displays (stays at 100%, but on lower res screen what it double in size). In CS6, the image is not resized, changes in % (16.67 on external, 33.33% on laptop) and rest about the same size.

  Maybe it's more than a bug that something I can do anything, but I am unable to connect to Photoshop.com (someone else has already posted about here, 5 days ago, no responses yet), I get a message 'it is therefore possible to create an account', even if I already have an account.

  Thank you.

  There is an option under preferences performance to use the GPU (in my MBP 13, an Intel HD GPU 3000).

  If put into it, so okay, then turned back on it.  Everything seems to work now.

• On the 2nd monitor color management

  In the file of Lightroom_3_help.pdf ("update 03/12/2010') provided with LR3 (p22 low), it is said:

  «Note: Lightroom does not color - the view from the library on the second monitor module.»

  Is this correct?

  I have two monitors: one about the Adobe RGB (a HP LP2475w) range and the other about sRGB (an old Samsung), as well calibrated and profiled.  However, if the same image is displayed in library view on both, the colors displayed on the second monitor are virtually identical to those on the first.  It's true, no matter who is the main screen of LR and that is the second monitor.  But if Lightroom isn't a not color-managed the second monitor, the image would be likely sent as ProPhoto, which seems very very pale any monitor were the other.  Even though Lightroom has made the image as sRGB always on the second monitor, then there will be a significant difference when the monitor range were the second monitor (apparently not managed).

  Anyone can shed some light on this?  My tests suggest that the second control is managed by color.

  The display is fully color managed on both screens for me. It must be

  supported the monitors thus or otherwise second would be completely useless. It's

  that is trivial to do so as long as your profiling solution supports it

  true for all Macs and most modern windows machines. To me, this looks like to the

  Manual is simply false and the s sentence a vestige of when they first

  added bi-ecrans support. I remember there being color bug

  with it, then where he could catch the wrong profile display. It comes

  clearly not true anymore.

  PS Adobe Gamma? This tool has been deprecated since many years! Person not

  in their mind has yet to use it. Material calibration tools are

  cheap and widely available today.

• Under XP, had 2 monitors but now use only 1. The system always acts as the 2nd monitor is here. How to stop this?

  Programs/functions as the system to display on the far-away monitor, do not display on the existing monitor, it is impossible to do the functions. It's as if the system does not realize that the other monitor is not attached.

  in Device Manager you have tried to uninstall the

  removed the monitor?

• icon editor sneaks to the 2nd monitor

  A Windows XP installation with main monitor in portrait and secondary as the orientation is landscape.

  But in LabVIEW 2009, the icon editor always appears on the 2nd screen.  Most of the

  time as my 2nd monitor is turned off, but fortunately, I turned on the 2nd just discovered this behavior.

  Is there a configuration to ini file for the icon editor always appear on the main screen?

  Thanks in advance

  Hi odd_modem,

  have you looked into this group? You will find updates, that should solve your problem...

• Full screen on the 2nd monitor

  Hello!

  I want to preview full screen on my second monitor / or third, but without losing my monitor edition (when the choice of full-screen, it seems rather than the monitor edition).

  But I want to: monitor 1: chronology, the Source monitor, mounting monitor etc / Monitor 2: Overview full screen.

  Is this possible?

  Thank you, all the best,.

  Roman

  Hi Romanh,

  Open your project and go to Preferences > playback and check these options.

  

  Thank you

  Ilyes Singh

• First reading 6 CS on the 2nd monitor...

  Hi people,

  Just uninstall 5.5 and now I see that none of the sequence parameters have reading on the second monitor option. In fact the read setting

  the button is grayed. Even if I try to create a custom ff.

  With the help of Mac 10.6.8

  First CS 6

  I have installed card Redrocket

  and also BMD Declink Studio 2

  Any ideas?

  Koray Birand

  www.kroaybirand.co.UK

  Hi, amel.

  We have changed which you access 2nd head and other features in CS6.

  Try the following steps:

  1. in the file menu choose Premiere Pro > Preferences > playback settings

  You should see your monitors listed under video devices.

  I hope this helps!

  Peter Garaway

  First Pro EQ

• Full screen has lost the 2nd monitor

  First of all, I use the beta private cs6. Last week, I lost the ability to use the preferences/reading/Video Device / Monitor 2 Adobe. Even when its selected, or one of them, nothing happens. So I don't have a reference of full screen monitor. I've tried trashing preferences, even reinstall with no luck? What gives? I have a CUDA enabled GPU and edit with GPU acceleration. The reference monitor works fine in AE.

  In the use of two monitors, one often extends the monitor in order to cover both screens. It's is no longer maximized but extended. If you want to use the second screen as a monitor in full screen, please make sure that PR is "maximized" at a single screen: