Similar Questions

• configuration of the integration broker

  could someone please help me understand how to configure integration broker between two peoplesoft applications and how it works?

  If you look at the peoplebooks bound Nicolas I think there it details well enough, but here are some things to consider in my experience and how I could explain it to someone... it's maybe not as technically correct as it should, but is more designed to help you understand the concepts.

  Think of remote nodes like "destination definitions."
  Think bridges as a "gateway to a destination.
  Think as the gateways connectors is the code for 'to connect to the destination.

  Then starting at the top...
  A service operation of East message we want to send from Point A to Point B
  the service operation has a routing... Which destinations it comes, goes and his leadership. for example, these are configured by setting the routing from the node A to node B, out . Node B is a remote node. Without him, how else tell us the system where to send the message. It is remote, because it is an external system.

  Because the methods of connection or connectors are programmed at the level of the Bridge , we associate the node with a gateway and a Connector on the connectors of the node definition page tab. In peoplesoft for peoplesoft, we use the PSFTTARGET connector that can be defined on either a local or a remote Gateway.

  the best way for me to help you differentiate the gateways remote vs local is to think of bridges like this. A local gateway can be a bridge whose local node of this particular PeopleSoft system defined in him and whose configuration of the appropriate connectivity (he knows how to deliver incoming messages directly to our application server processes). A remote gateway is one that does not have the local node specified in its files gateway.properties and therefor can not connect to us directly. It may be behind a firewall to another place, but a local node of the destination set and is the local gateway for this destination system.

  On a side note, changing the type of Connector changes how we configure things.
  Connector PSFTTARGET to ensure that the node is referenced in the gateway.properties file.
  for a HTTPTARGET connector put us nothing in the file gateway.properties, instead, the connector on the node tab will allow us to specify a URL it is recorded in the database on the definition of the node.

  We have the remote nodes to define our destination point
  our node needs a gateway because it is where the connectors
  the connector is programming for managing this type of connection selected (you can write your own connector, there is a developer for him kit)
  and an entry door can be local or remote to a PeopleSoft system based on nodes who knows the bridge itself.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to make non-visible control on the Front Panel appear at Design time?

  I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

  How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

  Thank you.

  It is documented in the help of LabVIEW.

  Hidden front panel display

  
  

  Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

  1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
  
  
  2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
  
  

  You can also use the Visible property to display the controls and indicators by program.

  You can also view all hidden front panel controls and indicators.

  Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

• Lightroom CC - development of non-visible presets on the context menu in the library Module

  Just installed Lightroom CC 2015 - loving the speed increase in the develop module.

  When I select a bunch of images in the library module and right-click (Windows of course), 'developing' settings from the context menu has a number of things listed, but missing completely all presets that are usually visible.  This was voluntarily removed in Lightroom CC, or is this a bug?

  If I pass the develop module, all my presets appear on the left hand side correctly.

  In the library module, they are all listed in the box "Saved Preset" above to develop quickly, but they are just missing now from the context menu.

  I tried to reset all my prefs (ctrl + alt + shift on restart) - still the same.

  Any ideas?

  Paul

  Lightroom CC 2015 running on Windows 7 Professional SP1

  It is true, that they are eliminated because of the speed. Some users were too develop presets so he slowed down too.

• Non-visible value in the drop-down list box

  Hi all
  
  I have a bar of control with 5 drop-down list boxes.
  
  As the user, the value in a box, others are refined to include only items that are related to the user's selection.
  
  All works well with an exception in a single list, the value is this drink is not visible.
  
  Anyone has previously met and nobody knows how to correct?
  
  Thanks in advance for any help.

  Duh.

  In the one case where him point fails to show I was not have cast the value as a string.

  Casting solved the problem.

• File shares of some non-visible windows through the clientless ssl vpn

  Hello

  I have an ASA 5505 with the SSC module and were able to get the ssl vpn upward and running, for some reason, some of the shared folders do not appear when I connect. I checked permissions for shared folders which can't be compared to those who do, and they are exactly the same.

  Thank you

  Chauncey

  Don't forget to note the positions that helped you and mark it as resolved if this addressed the issue. Thank you!

• title of report of non-visible pivot on the dashboard

  Hi all
  
  
  I put a pivot table report on dashboboard, when I check discovers that made available it givs me only the title and the position I have check the PivotTable, it gives my pivot.
  
  Is this something which cannot appear together title of the report and the report of Pivot.
  
  Kind regards
  Megha

  On the dashboard, click on Options > modify the dashboard

  Then, add another copy of the dashboard object that you used for your PivotTable.

  Drag it over the existing PivotTable object and select Properties > Show View > title

  Make sure you have in fact the title of your choice in your application see / Compound layout.

• Non-visible LUNs to the second esx Server

  Hi, I have two HP G4p esx 3.5 servers attached to an MSA1000 with a hub via the emulex fibre FCs I had created two LUNS on the MSA with the ACU. One esx server sees the two LUNS created but the other cannot see the LUNS even after doing a rescan. Sometimes when making him analyze again the VI is suspended. I have obsereved both esx servers to see two different WWPN pointing to two different targets. I want both esx servers to see the same LUNS shared so I could run somewhat your since I'm new to vmware technology. I enclose a snapshot that I think could someone out there with the possible workaround to the issue.

  Thank you

  I agree with other posters - make sure your zoning is correct on the FC switch and also ensure that you have checked boxes correct and applied, in the selective presentation of storage (SSP) within the ACU. If this is all OK, a new scan of the storage should display the logical unit number.

  You're talking about the different WWPN is the Emulex HBA on their respective hosts.

  Post edited by: java_cat33 - Note about WWPN

• FilePath to the integration broker

  Hello
  In FSCM9, 8.49 tools where we should define variable FilePath %?
  Thank uou.

  Hello:

  % FilePath is a metafile variable that returns the current path as a string (in AE peoplecode only). It cannot be set.

  Thank you
  Sameer.

• Integration Broker 3rd party Communication

  All,

  Can anyone provide an example of using TransformEx method in the XmlDoc class.

  I filled an XML file in a table. XML will normally contain multiple records.

  But my requirement is that I need to provide a SOAPDoc to the third party through the IB.

  XMLDoc, I can group each record with separate tags.

  When you use SOAPDoc, I can only use methods AddEnvelope(), AddBody (), AddMethod () and AddParm() - build each column in the table.

  With the help of SOAPDoc, I'm not able to aggregate each record like doc.

  TransformEx is the right approach for this problem?

  Any suggestions?

  Thank you

  Suresh

  You don't need to explicitly create a soapdoc to send SOAP.

  Integration Broker will add the envelope of soap, the header and the body to xml files when sending, based on the property of connector SoapUpContent, which is defined by default on Y.

  Take a look at a tutorial that I wrote about the various scenarios for integration using the Integration Broker.

  Broker integration for PeopleSoft Developer databases. Blogging about Oracle Applications

  Kind regards

  Halin

• Integration Broker - several areas

  We have several environments in our boxes of test app server and the web. It seems that we have only one of these environments where work Report Manager. When we did our original installation of PIA on the web server, we installed a single domain - peoplesoft. Each of our environments is a separate proceeding under the webserv\peoplesoft\applications\peoplesoft\portal. All our web sites for each of these instances works well, but I think that we should have our pia Setup so we have a separate domain for each environment/SID. I see the integrationGateway.properties file, I can see the URL to communicate with the application server. This properties file is under webserv\peoplesoft\application\peoplesoft\psigw. It is not a separate file (or folder) for each environment. This makes me think that the cause of the problem with Report Manager is that we do not have a separate domain for each environment (webserv\Demo\applications..., webserv\Test\applications...).
  
  How other shops to configure the PIA on their test boxes. You have a separate domain for each SID or do you run with just a domain name and the SID are under this domain name?
  
  Thank you
  
  Paul

  Hello

  It is strongly recommended to have a separate PIA for each environment.
  Especially for a correct use of the Integration Broker. A single instance of the PIA may have only one door of entry, which can connect to multiple application servers.
  If your PIA assembly is set up to handle all traffic separate instances of peoplesoft (read server/database application DEV/TEST/etc) and especially if your environments have the same node names, the integration broker will route the message to the first instance. This can cause DEV messages to send to the TEST and you do not want. Also a point of view of security, when you use the same node names in one environment you have active SSO, this will cause a transparent access between DEV and TEST etc.

  For brevity, every environment should be it's own PIA.

  Kind regards

  Halin

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• My computer does not connect to the Internet. Event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."

  Hello!
  I am working on a Dell Inspiron 1300 laptop for a friend. She has Windows HP Home Edition, SP3 installed.
  He said that Saturday night he started to act funny and wouldn't connect to the Internet. There were a few popups then begins, and he did not know if they were connected to not go on the Internet.
  He had the rootkit.zeroaccess infection. I used Combofix to remove it. It won't always get on the Internet, either via a wi - fi or ethernet connection.
  Looking at the event viewer, I see event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."
  Then, event 7001, "(NLA) network location awareness service depends on the service protocol driver TCP/IP which could not start due to the following error: the dependency service does not exist or has been marked for deletion.".

  I copied ipsec.sys from another XP Home machine which worked and stuck in the Windows\System32\drivers directory and it still does not work.

  Any ideas are greatly appreciated!

  Dave

  Hello

  See this link:

  http://TechNet.Microsoft.com/en-us/library/cc958861.aspx

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=7003&EvtSrc=Service+Control+Manager&lcid=1033

  Let us know the results.

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.