None of my shortcuts work

Similar Questions

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Portege M100 - none of the drivers work

  None of the Vista drivers work for Windows 7, so I switched to XP Professional and always SOME drivers don't work?

  Is there a special way to install after installing Windows?

  see you soon

  Hi ollie,.

  It would be interesting to know what you mean with none of the drivers work. You get an error message or what is exactly happening?

  Regarding the issue of Windows 7 I think that it of normal that Vista drivers do not work for Windows 7 because the Portege M100 is very old notebook, so I doubt that Windows 7 will work on this subject.

  Moreover, the Toshiba site, you will find an installation instructions document. Use this list a driver installation order is recommended.
  Check this box!

• I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  What do you mean by "presented guidelines? Here is a support article on how to manage subscriptions:

  View, change or cancel your subscription - Apple Support

  See you soon,.

  GB

• None of my apps work after that my laptop has been infected with the virus Vista Internet Security 2010,

  Hi all
  I need help to get my computer back to normal.

  My laptop has been infected with the virus Vista Internet Security 2010, but I removed it, NOW none of my apps (Yahoo Messenger, trash, other folders, SYSTEM, all file icons restore,) work, I managed to get rid of the virus visa, but still none of the programs work. When I try to open any program, it displays an error message "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel. " I did all the steps, but still nothing works now all my files are open with the same file. I try to download a program to fix this problem, but I'm not able to run cause keep giving me the same error and cannot download anything. Is it possible to recover my computer as usual. Any help much appreciated.
  Help, please.
  Oh also all the icons on my destop are replaced by the same feacture of icon, but the name of the icons are staying same.if it shows adobe icon and all icons are adobe, when I open it with ie, then everything will change IE also. even if the opening programme has also changed to the same icon as dekstop one. now all my things are open with yahoo messenger:(c'est fou:()

  Try restarting your PC and press the F8 key repeatedly and then start in safe mode with networking and download and comprehensive performance analysis with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If this does not work, try to run Windows Defender version offline beta:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  You can take a look at:

  http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

  If the problem has not resolved, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&task=Diagnostics&mkt=en-us&St=1&wfxredirect=1

• I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  You are one of the very few who would get an answer to your problem. I had a similar problem that it resolved itself.

  I haven't used my laptop for a while and during a power outage, I wanted to us my laptop. He did not move.

  Problem is that due to the power failure my internet wasn't working.

  Connecting Wi - Fi has been restored my laptop have been updated and everything worked again.

  Make sure you have internet connection on both computers.

• Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Serial numbers are normally only applies to the case of the disc.  If you do not find the case of disk while you might be dealing with a scenario of redemption code... depends on where you bought the software and what is the software.

  Quickly find your serial number

  Using redemption code

• The value of work area shortcut works do not first CC

  Hello

  I have a weird problem, set workspace shortcuts do not work on the first CC on my Mac.  Nothing happens when I hit the combo shortcut,

  that are defined for the options [and] in the shortcut menu.

  Shortcuts work as expected on the first CS6.  Am I missing something here?

  Thank you

  Gerry

  Works fine for me on Mac 10.8.4.

  Have you activated the space bar to work through the menu in the timeline panel first?

  Peter Garaway

  Adobe

  Premiere Pro

• HP15 ac179tx: none of the shortcut keys work

  I bought a computer laptop ac179tx HP15 that comes with freeDOS. I installed windows 10 and all the drivers that are given on the HP website. The shortcut keys for control of brightness, volume, etc. do not work even after you have installed all the drivers. I even tried some drivers that have been proposed in the hp forum for this issue for other laptops. They do not seem to work... Pls help... Thank you...

  Hi @SG50,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the shortcut keys does not work on your laptop on Windows 10. Here is a link to the drivers for your model in Windows 10: http://support.hp.com/gb-en/drivers/selfservice/HP-15-ac100-Notebook-PC-series/8499326/model/9329831

  Please download the HP System Event Software-Solutions utility and install it on your laptop to test if it works.

  10 Windows that you have installed is a copy of the commercial version, you can also contact Microsoft for the question.

  Let me know how it goes.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• None of my windows shortcuts work. I have to open programs as an administrator. Some are open to all. What's wrong?

  When I try to open programs by clicking on the window, it opens a box to ask what software I want to use.  I can only open certain programs as administrator, some are open to all.   Internet Explore works if I open as administrator.  MicrosoftOffice said there is no attached program.  I ran a virus scan and can't find

  Hi George_128,

  ·         Did you the latest changes on the computer?

  ·         What happen when you try to open the shortcuts?

  ·         You receive an error message?

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Try to create a new user account profile and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved by the above method, then you might have a corrupt user profile. Follow the article provided to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

• None of the shortcuts on my desktop won't work!

  The icons on my desktop work anymore, when I try to click on them, the work computer just to me, and I have to go through the start menu to get anything

  to work.  Just started two days before, don't know what to do to unlock or to reset...  That's happened?

  ...... Just started it two days ago...

  In this case, do a system restore. Choose a longer date from 2 days ago as your restore point. (Select a date where the desktop icons have been workin.)
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  You can also try to make a reconstruction of the icon cache. Yours may be damaged.

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  Another suggestion:

  Restore explorer.exe

  Press CTRL + Alt + Delete > Task Manager > processes tab > right click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > OK

• How can I configure my exe associations... None of my exe shortcuts work

  When I click on any exe file I get a pop up to association set... dunno what happens... all antivirus scans are negative, defragmented and cked reg

  Hello

  see if this helps you;

  When you run an .exe on a Windows Vista-based computer file, the file can start another program. In addition, the icon of the file .exe may not appear as expected. You can also receive additional errors in the .exe file or the program that starts.
  http://support.Microsoft.com/kb/950505

• CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. The other shortcuts work fine.

  CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. If I go to history > recently closed tabs and click on something, it works, it's just the keyboard shortcut that broke. The other tabs keys work fine.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• How a shortcut works with reference to applications that require a password.

  At work, we have users who record the link as a shortcut to our Service free employee application on their desk tops. Whenever they use the application it must reset their password. Using the direct link and not the shortcut they are able to identify you with no problem. If the shortcut has been created before a password has been implemented the application will look for the user to create a password whenever they use the shortcut? If they use the intranet road established to log that they have no problem using their established password, thanks to the shortcut, they need to have the password reset? What do you think?

  At work, we have users who record the link as a shortcut to our Service free employee application on their desk tops. Whenever they use the application it must reset their password. Using the direct link and not the shortcut they are able to identify you with no problem. If the shortcut has been created before a password has been implemented the application will look for the user to create a password whenever they use the shortcut? If they use the intranet road established to log that they have no problem using their established password, thanks to the shortcut, they need to have the password reset? What do you think?

  Hey dhennessey

  These vista support forums are designed to help users to vista home

  for your questions on the request of the employee self-service I suggest you contact your system administrator

  Walter, the time zone traveller

• message usb device not recognized guard appearing, none of our devices work

  None of our usb ports work so that we cannot use the printer, mouse, or plug in our camera we get the message this device is not recognized. We have a laptop

  Hello

  Check the settings/configuration (BIOS/CMOS) that get started - often F2 so watch you start screen.
  Check that the USB is enabled. If these methods fail you will need a real computer store
  (not the leeks and the glances at a BestBuy or other big box stores) or Technical Support from the manufacturer of the system.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. You can remove all instances of any individual device and then restart to see
  If this device activates.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.