Not able to connect in vCenter 5.5 after upgrade
I installed vCenter from 5.1 to 5.5.0, build 1750795. The upgrade process has been the sweetest all the upgrade I did since 3.5, until I tried to connect. He said ' you are not allowed to log on the server: vCenter. I found 2035758 KB, but when I tried to add a new domain of identity source, I got the error saying "There is already a native AD ID or AD LDAP registered ID". The vCenter is a child domain member server, but this child domain is not in the identity source, while the root domain and another child. In the web client, I can use admin@system-domain and my administrator of domain (in the same child domain as vCenter) for you to connect. I see that no host have been reconnected.
Someone had this error before? Anyone know what I'm missing?
Thanks in advance
Byron
Anyway, I contacted the technical support and I was told to use [email protected] to connect and assigned administrator rights for admins of the domain to the level of vcenter. After that, I was able to use my administrator account in domain to connect on vSphere client and web client. After further research, I found that admin@system-domain is no longer the administrator of SSO, instead, it has changed to [email protected]. Little things, but frustrating.
Tags: VMware
Similar Questions
-
Not able to connect to APEX Administration Services after new installation
Hello
I installed oracle database 11g (11.2) and apex 4.2.3 in my laptop. I did all the steps and now I'm at the stage
"Create a workspace and add users of the Oracle Application Express".
When I'm starting to apex, I get just blank page. Don't know what the problem is. If anyone can help.
http:// localhost : 8080 apex_admin/apex/apex_admin
There's no problem in logging into Oracle. I faced a problem when setting up "Embedded PL/SQL gateway. Not sure if this causing issues while opening apex.
. Loading images directory: C:\Anand\APEX\apex_423\apex\images
Created directory.
declare
*
ERROR on line 1:
ORA-22288: file or LOB FILEOPEN operation failed
The system does not have the specified path.
ORA-06512: at "SYS." XMLTYPE", line 296
ORA-06512: at line 16 level
PL/SQL procedure successfully completed
Thank you and best regards,
-Anand
Hi Jariola,
Don't know why my my configuration of the embedded PL/SQL gateway failed after repeated tests.
I uninstalled APEX completely and then kept my "apex" installation folder under "c:\temp". Then run under-
@apex_epg_config.sql C:\temp
This time he succeeded without any problem. I am now able to connect to the apex
The only change is the folder when I kept my installation of apex. Earlier, it was "C:\Anand\APEX\apex_423" and now "c:\temp\apex".
Platform
APEX version: 4.2.3.00.08
DB version: 11g Release 11.2.0.1.0
Web server: EPG
System operating system: Business Windows 7 64 bit
Browser (s) / version (s): Google Chrome: version 31.0.1650.57 m
Thanks to all who tried to help.
Kind regards
-Anand
-
not able to connect to vCenter using powercli
Connect-VIServer: Connect-VIServer demand f 07/06/2012-13:22:15
hurt stateful HTTP 503: Service unavailable.
On line: 1 char: 17
+ connect-viserver < < < < 29.64.5.34
+ CategoryInfo: ObjectNotFound: (:)) [connect-VIServer], ViServer)
ConnectionException
+ FullyQualifiedErrorId: Client20_ConnectivityServiceImpl_Reconnect_Servi
ceUnavailable, VMware.VimAutomation.ViCore.Cmdlets.Commands.ConnectVIServer=====================
PowerCLI C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI > Get-Powe
rCLIVersionPowerCLI Version
----------------
VMware vSphere PowerCLI 5.0 build 435427
---------------
Versions of the snap
---------------
VMWare AutoDeploy PowerCLI 5.0 build 575
VMWare ImageBuilder PowerCLI 5.0 build 575
License of VMware PowerCLI 5.0 build 395016
VMWare vSphere PowerCLI 5.0 build 435427Curious to see how a Ko on storage see tab in vCenter Server does not display anything solved your problem.
-
Not able to connect to vCenter
I'm trying to deploy VMware APP Volume 3.0 in the laboratory and in trying to integrate App Volume with vCenter.
I have no firewall between the two vcenter and app volume server are in the same range of IP addresses
Ping works well between app volume server and vCenter / ESXi host
Error:
Unable to connect to 192.168.109.200: connection failed!
You have SSL turned on? May need to disable SSL on the EGGS. Sign in and go to the/etc/wemi/utils and run the SSL disable the script.
-
I am not able to connect the microsoft 5000 comfort after replacement of the cylinder head box
The most original receiver that came with my keyboard Microsoft Comfort Keyboard and Mouse 5000 was lost. I bought another but I can't be connect with new cylinder head box. There are no buttons to push to try to sync, what should I do?
Hello
Take the battery out of a set because they can interfere with each other. On the basis of each mouse
should be a little button that you can push with a pen point or a trombone (small white button near the battery
door on the lower right side of mouse with Microsoft at the top). On the bottom of the keyboard here as in a
button probably labeled 'Channel Connect'.When you press buttons on the receiver lights should Flash for a few seconds in rotation.
Make sure you have the latest version of the Intellipoint and Intellitype software.
IntelliType and Intellipoint - free
http://www.Microsoft.com/hardware/download/download.aspx?category=MKWireless Optical 5000
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=052There are 3 years warranty on the game in case you need assistance. Support for 90 days
start at the end for 1 claim of warranty or incident.Hardware support of MS and warranty claims
Tech Support 1-800-936-5700 for MS Hardware.I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Not able to re - import images into Lightroom after upgrade Windows 10 system
A brief history: I've upgraded to Windows 10. The video driver kept crashing (I do not do a clean install, upgrade) and I decided to uninstall the driver and do a clean install of it. To do this, it was recommended that I have started in safe mode. I'm locked down because it asked for a password that I didn't because I used a PIN. A boat full of minor issues as well as the fact that he seemed to be in no way around the issue of safe mode password pushed me to reload the OS I did a new SDS. All right. I kept the same letters to my external storage drives. When I installed LR, I discovered that Windows has changed my drive 'K' to 'E '. I changed it back, but she is now TWO drive letters.
Fast forward to LR: I don't have records of my 'K' drive in my library.
At this point, I resigned to re-import files. Despite the 50 or more, I can do this. Well, that's weird: when I choose 'Import' thumbnails appear and then the 'DOUBLE SUSPECT"are of course are not checked! Clearly LR is telling me that these files are already in LR, but where? The files that I CAN import are ones I removed LR.
ANY suggestions?
Thank you!
one
Fast forward to LR: I don't have records of my 'K' drive in my library.
At this point, I resigned to re-import files.
Reimport the files will not fix the problem, it will most likely make the problem worse.
You need to find photos in your Lightroom library (instead of re-importation) module, and then include this file, they are, according to Lightroom.
Steps to follow:
- Click on all photos
- Disable filters (Ctrl-L for Windows) or Cmd - L for Mac once or twice
- Sort photos (view-> sort-> filename)
- find one of these photos by file name scrolling upwards or downwards until you find the photo in alphabetical order
- Determine the folder is to right-click on the photo and then go to the folder in the library, which should highlight the folder on the left in the library panel (if all goes well, once you find the folder for a single photo, you should be able to find the records for all photos)
-
Hi, I'm a newbie to Vcenter. I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2
Hello Cy1989,
Check the items below in your vCenter server.
1. check that VMware VirtualCenter Server service is started otherwise starts pls start...
2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...
3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.
4 Vefiry database are running and all required database services are running...
-
Not able to connect with the root via putty ssh account
Hello
I activated the lock mode and activated ssh as well.but I am still unable to log in using PuTTY says access denied. At the same time, I can able to connect to esxi console using the root account. Help, please.
In the locked mode, you will only be able to connect through vCenter, not via SSH.
-
HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP
Hello
I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.
When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).
My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.
Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?
the same connection problem, of course, it happens when I do touch printer and console web administration, of course.
In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices
I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.
My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.
Thanks in advance for your help,
Lorenzo
Hi Lorenzo,.
To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)
You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.
Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:
http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html
If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:
Kind regards
Shlomi
-
I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please
only title bar opens and nothing else... Please help
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Also check the cookie exceptions.
-
2000-2314TU HP: not able to connect to the LAN and Wireless network
Hello
I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?
You are the very welcome.
-
Satellite L650-11R - not able to connect to public networks
Hello.
Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.
I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.
Any suggestions?
It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.
Try to compare the LAN settings with others who use the same operating system.
-
Not able to connect to the server with modem 56 k
I try to connect my Tecra via modem 56 k Internet.
Also, I tried with another computer laptop with the same details and that worked.
But when I try it on my Tecra I get an error that is not able to connect to the server.So I think that it is a parameter that is not defined correctly for the modem.
(If you compare it to another laptop all parameters are the same as windows).Thanks in advance,
Theo
Hello Theo
Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.
After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.
-
my ipod nano is not able to connect to itunes.
my ipod nano is not able to connect to itunes.
What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?
-
I am not able to connect to the main wifi network but can connect to the network of comments.
Hello
This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.
The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...
Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.
Wait a minute
Turn on the modem first and leave a few minutes, he managed by itself
Turn on the next device that is connected to a modem and leaves turn a good minute
Keep turn on devices one by one at a time, one minute apart, until the entire network is back
Recheck the network and report on your results
Maybe you are looking for
-
All of a sudden my gmail account disappeared on my MacBook Pro. All I have now is my icloud account and is not useful. I go to system preferences, add an account. When I point out Google to restore my gmail account nothing happens. I just get a b
-
HP Jet 7: Stream 7 BIOS password HP does not / how I can reset it?
I can't my Jet 7 HP BIOS.After pressing 'Power + flight upwards' it leaves me the "Start menu".When I press F10 to enter BIOS he asks me to "enter the administrator password."After a few attempts, I finally got the message: "disabled system [85799247
-
Satellite L300-145 - BSOD appears if I installed 4 GB of RAM
Hi all I have this Satellite L300-145 PSLB0E-03601LPT and I want to install 4 GB of RAM, but when I install 4GB on boot THEN BSOD appears. I try to change with the other memorys brand with equal modules, I'm trying to install Windows 7 64 bit, Linux
-
I get the KB953297 error code everytime I try to upgrade.
whenever I try to automatically upgrade my windows, I get this error code. I use Windows XP and Internet Explorer 6. I have a Norton anti-virus. What I need to deactivate or reconfigure the settings?
-
Download jumps to the top of the payment window
I have successfully downloaded a bunch of images, but when I try to upload an image (file #70572392), I get a pop window saying 'buy image $265 '. I have a lot of downloads left for this month.