Satellite L650-11R - not able to connect to public networks


Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

Any suggestions?


It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

Try to compare the LAN settings with others who use the same operating system.

Tags: Toshiba

Similar Questions

  • 6 of VMWare Workstation - not able to connect to my network "physical."


    I installed VMWare Workstation 6 on my Windows Vista Sp1 - machine (host).

    With VMWare, I have virtualized a Win 2008 Server. The configuration of the ethernet connection is on "the bridge."

    I a physical NETWORK adapter on the host, which is connects to an Access Point Wireless LevelOne (with built-in switch).

    I am not able to ping to the physical NETWORK card to Win 2008 virtual server. Get an idea what I did wrong?

    Best regards


    • The firewall between the two? Turn them off temporarily.

    • The customer is using DHCP? If so, did he receive an address?

    • Post ' ipconfig/all' of the host AND guest, and the.vmx the file of the client.

    If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!


    VCP/vExpert 2009

  • 5.5 ESXi host is not able to connect to the network

    I installed ESXi5.5 U2. But the ESXi host grab an IP address from the DHCP server. I tried givind static IP of my office network, but still unable to connect to the network. I checked the CLI, the vmnico of the adapter is in place. Why the machine does not have an IP address?

    I started this machine from the network (available in the bios settings) and observed if an IP address is required. Then, I started the server from the hard drive. Surprisingly, it took an IP and I could connect via the network.

    After that, I plugged this NETWORK adapter to a different location on the same server. I found the same problem (do not take IP). But when once again, I did the "Network Boot" thing, it took an IP address and now it works fine.

    What is average?

    Apparently, my problem is solved, but I still don't know the reason.

  • I am not able to connect on one of my computers, my network error message saying: unknown username or bad password.

    Journal of the network questions

    I am not able to connect to my network to one of my computers.  I enter the username and password (same as to log the computer - correct?), and yet I get the newspaper no failure message saying unknown user name or bad password.  What can I do?

    go to the Properties window (right click computer and select properties) is the only registered owner your name on the first pc and your first and last on the second?

  • Satellite L650-11R - broadcom WLan 802.11n does not


    I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

    After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

    Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

    I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

    My laptop is Toshiba satellite L650-11R
    network card: broadcom 802.11n
    am on Windows 7 64 bit home edition

    Help me to find drivers or tell me how to install correctly with corect NIC drivers.

    Please help, thanks in advance!

    I solved my problem. All the drivers that I tried to install worked

    The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

  • Satellite L650-11R - its is trolling when the screen is off

    Hello people.

    I have an interesting problem. In fact, I have a Satellite L650-11R and TV Panasonic TX P42X10Y.

    When I connect the laptop and TV via HDMI and everything works as it should be, games, movies, but everything works fine until the screen of the laptop is open. While it is closed or if you switchmake the TV your main screen or the office, the sound in the movies is bad.
    And not every 30 seconds or minutes rather than continuous. Picture is great, but the sound is a disaster, even a few seconds do not hear a thing.

    The laptop is not even a week, codecs are concerned probably not because the sound works in the movies when the laptop is open.

    Any help appreciated

    PS Sorry for the English


    To be honest, I never heard such a problem. For example if I connect my laptop to TV cable HDMI I always have good sound quality, even I use two monitors or monitors only.

    In any case, what operating system you have? You use the version preinstalled Windows or another?

    First of all I would update the audio driver. His most recent driver, you can download from the official website of Toshiba: > support & downloads > download drivers

  • Satellite L650 does not detect wifi networks

    My laptop Toshiba Satellite L650 ceased to detect wireless networks.
    It shows only Dáil and vpn...

    The wireless network is not detected.
    I was able to connect to the network using my phone, so something was wrong with the laptop.

    I also checked if the broadcom 802.11n works or not and it appears as works perfectly.
    But don't detect is not wifi networks.

    Could someone help me with this?

    Wireless network card is enabled?
    Is WLAN led on when you use the FN + F8 key combination?

  • Satellite L650-11R - updated graphics card drivers


    I have a Satellite L650-11R(that's what's written on the box) and my problem is that I found the latest drivers for my Mobility Radeon HD 5650 series and when well even as the site of AMD says that this driver is mobility graphics cards when I want to install the computer tells me that these drivers support not my graphic instrument and if I go to Device Manager the only card that appears is the VGA! So now the only drivers that I can install are outdated (8.753.0.0)
    And im wondering why I am condemned to use these wwhen out-of-date driver clearly there's more recent avalible?

    I hope some1 reading this!

    Hi yusty,.

    Why you are looking for on the AMD Web site directly to the latest drivers? All drivers for your computer is located on the Toshiba official European driver download page: > support & downloads > download drivers

    And I don t understand why it s a problem with older drivers. Not always the most recent driver is the best.
    In addition, only the drivers provided on the official website of Toshiba are pre-tested and designed for your laptop. Install the other drivers that happens on your own risk

  • HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP


    I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

    When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

    My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

    Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

    the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

    In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

    I alreay set and as DNS pri/sec and had an output of cycle after the series of DNS.

    My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

    Thanks in advance for your help,


    Hi Lorenzo,.

    To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

    You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

    Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

    If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

    Kind regards


  • I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

    only title bar opens and nothing else... Please help

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Also check the cookie exceptions.

  • 2000-2314TU HP: not able to connect to the LAN and Wireless network


    I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

    You are the very welcome.

  • Not able to connect to the server with modem 56 k

    I try to connect my Tecra via modem 56 k Internet.
    Also, I tried with another computer laptop with the same details and that worked.
    But when I try it on my Tecra I get an error that is not able to connect to the server.

    So I think that it is a parameter that is not defined correctly for the modem.
    (If you compare it to another laptop all parameters are the same as windows).

    Thanks in advance,


    Hello Theo

    Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

    After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

  • Satellite L300 will not let me connect

    My Satellite L300 will not let me connect unless I'm in safe mode and when I go to advanced options it just comes up with a blue screen


    Who knows what's the problem here?
    Maybe you should install new OS. You can enter boot options using F8 at startup?

    Repair my computer option is available?

  • my ipod nano is not able to connect to itunes.

    my ipod nano is not able to connect to itunes.

    What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?

  • I am not able to connect to the main wifi network but can connect to the network of comments.


    This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

    The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

    Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

    Wait a minute

    Turn on the modem first and leave a few minutes, he managed by itself

    Turn on the next device that is connected to a modem and leaves turn a good minute

    Keep turn on devices one by one at a time, one minute apart, until the entire network is back

    Recheck the network and report on your results

Maybe you are looking for

  • RGS with router

    Hello! Workstation is located behind the router, where is the internal network. Everything works very well in this internal net. But when the workstation mobile (in this case, it is also the license server) is outside the network, problems come out.

  • communication with agilent 33522A

    Hi all Please can someone help me communicate with my instrument named below (agilent 33522A) What do I need exactly please (drivers, hardware) Thank you

  • problem with a block of memory in labview 2009

    Hi all I have "ERROR: MapLib:979 - LUT4 symbol" during the compilation process (lots of errors like this), and I discovered that the reason of my problem is block of MEMORY. To be sure that the problem is in this block, I did a very simple project in

  • Cannot create file winzip iso dvd

    When I create a dvd from a winzip file or iso photoshop I get the following. Windows media player cannot play the dvd because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  • X 2000 problem with itunes

    Hello I have a new X 2000 v2 2.0.04 firmware. When I use it -itunes on my PC with seven working and gives me error 8003. -l'Apple Store on my iPad and my iPhone won't download or upgrade the application. -itunes on my macbook air with mountain lions