not able to key in windows (win7 homepremium)

Similar Questions

• I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

  I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

  original title: Reinstalling windows xp

  Hi Lynn B,.

  ·         What is the exact error message?

  ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

  ·         What service pack is installed on your computer?

  ·         You have the Windows installation disc?

  You can consult the following Microsoft articles:

  Install, reinstall, or uninstall Windows

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  http://support.Microsoft.com/kb/978788

  Hope this information helps.

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• Not able to change, update Windows settings-Windows 8

  Hi all

  I have problems with Windows Update settings, I'm not able to change the settings for Windows Update. My parameters are set on the updates but let me choose whether to download or install. I want to change these settings, but the settings are grayed out.

  I am the only user of this laptop, my account is the administrator account. The laptop is not a part of any domain or workgroup. I use Kaspersky Internet Security 2013 updated regularly. I scanned my computer for infections and my computer is quite clean.

  I have attached a screenshot as well.
  
  Someone can help me with this problem, how can I make changes to windows update settings?
  
  Thanks in advance.

  Thank you for your answer

  I've tried all these steps, but nothing is done, always I'm not able to change the settings. I can get and install the updates manually checking the updates. I want to automatically download and install updates. I also tried Tweaking.com Windows repair all tool that has not worked.

  
  EDIT:

  Greetings...

  I managed to solve the problem. I opened the registry editor with administrator rights sailed to the following reg key
  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU. and delete all the keys inside the to THE folder.
  Restarted the computer and now I am able to change the settings for Windows Update.

  This problem is now resolved.

• I'm not able to run a Windows Azure application

  I have a very strange problem.

  I'm not able to run an application in windows azure has a WCF service and mschart inside. Here are the steps to reproduce the error:

  (1) create a new windowsazureapplication with an empty asp.net webrole
  (2) now to add a new WCfService
  (3) run to make sure it works ok

  http://i.stack.imgur.com/1g6gW.PNG

  (4) now in one pages include mschart and open page design to ensure that the webconfig is changed to use the mschart.
  (5) now try to run the project.
  I get the error message like this one:
  Enter a description of the image here

  Is this a problem with blue windows or I do something wrong?
  FYI: This isn't my first project on windows azure.

  RuchitRami

  As far as I know Toshiba doesn't support this Microsoft stuff, so I think that Microsoft is the right address for these issues.

  Have you already checked that Microsoft saying about it?

• Magic mouse is not able to pair under Windows 7 Professional

  Magic mouse is not able to pair with MacBook Pro early 2011 Windows 7 Professional 64-bit.

  Y at - it a tip for the pair?

  Can you cancel the twinning of the two operating systems mouse, pair with Windows, first of all and then match it with OS X second?

• not able to scan in windows media player

  I can scan in the paint, but not in Windows media player, I use windows 7 64 is the HP Photosmart C3180 printer

  Sorry, but will not be able to scan from WINDOWS MEDIA PLAYER.

• not able to connect to windows update

  Win 7 pro 64-bit, sp2 after windows installed 10 has not not able to connect to update server. When an attempt is made to trust installation and a host file resume all cycles of memory and cpu and it will continue to do that too long current arrives at the machine.

  I ran fixit, check tools sfc, 3 different types of root kit tools and PGE antivirus both offline and online, new installation did not help, formatting the drive did not help.

  support Microsoft is still without knowing what is really the issue. If you can help would like assistance

  This problem seems to be related to a windows installation failed 10 what I finally did after a month of working with microsoft is I went to the microsoft update catalog site and downloaded and installed an update stand-alone said to improve the State of update and after about 4 hours it installed and downloaded updates.

  It's the microsoft catalog https://catalog.update.microsoft.com/v7/site/home.aspx

  hope that this help anyone having this problem.

• Not able to locate the Windows Media Player 12.

  Original title: Windows Media Download? Do not find... disappeared

  Recently, I had to do a check disk and a system restore. Back to the computer, I was able to locate the Windows Media Player 12 United Nations, I looked and looked and there was'nt even situated in the 'Windows features on and outside Tower' box. Then I got on the chat with microsoft and they sent me a link to dpownload it again once, however I downloaded it, and he kept saying "these updates are not compatible with your computer": even if I downloaded the correct link and also I'm aware of updates. Also, I tried to find the download on microsofts website and it says that the page is unavailable.

  I was able to locate the media player in the C drive, but only fragments of it, I know its there somewhere and I was wondering if there was a way to access?

  I don't want a response to "go to microsoft and redownload. I'm pretty crazy right now with people who post those.

  Someone at - it true tech tips? Apparently, Microsoft is without it.

  anyone?

  Windows Media Player 12 comes by default with Windows 7.

  Check out these links MS

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-12

  http://Windows.Microsoft.com/en-us/Windows/Windows-Media-Player

  http://www.Microsoft.com/en-us/download/Windows-Media-Player-details.aspx

  Try the steps mentioned by MS and audit officer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/problems-with-Windows-Media-Player-12-for-Windows/a2e4c0a3-3e3c-4C59-b5cd-d54f7d29ad30

• Not able to download with window 8

  Hi, I'm not able to download Adobe acrobat XI with window 8.

  Please help.

  Thank you.

  Try using another browser

• not able to add a windows XP Home netbook to a group windows 7

  When use a USB key to set up the home group for wireless niether the office or the laptop can see each other

  Hello

  Only the computer that is running Windows 7 can join Win7 homegroup.

  ---------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with Off simple sharing, you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Keyboard does not, not able to connect on windows xp?

  I haven't used my computer for a year or two because I use a cell phone since then. But I wanted to install something more bigger on my computer because it wouldn't work on my laptop, so I tried to log in, BUT there is the problem.

  Everything works fine, but when I try to type the password (mouse works), the keyboard will not write, and on windows xp, unlike windows 7 you cannot connect through a virtual keyboard. I tried different types of keyboards and I'm sure that's not the problem. It must be the driver that does not work, but how am I supposed to solve this problem without signing in?

  For your information, there are no files on this computer that must be saved, but I don't have a windows CD (Yes long history in brief: my parents divorced we all moved and he probably got lost somewhere...) "I have to buy a new one?)

  Is it possible to reset the entire computer without a CD or ignore the password?

  Hi schonokay,
   
  To boot into BIOS Basic Input Output System () procedures vary according to the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts.
   
  For more information, see the documentation provided with your computer or go to the website of the manufacturer of the computer.
  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• Not able to send mail, Windows Live Mail error ID: 0x800CCC0E

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  My Outbox has 92 messages and not to send them. When I try to send them first get a message "connect to internet".

  then the message belos?

  The connection to the server has failed.

  Subject ' Fw: it's us! »
  Server: 'SMTP.west.cox.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 50
  Secure (SSL): No.
  Socket error: 10060

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any further assistance.
  http://windowslivehelp.com/product.aspx?ProductID=15

• Not able to search for Windows updates

  When you try to check the updates I am introduced to a page indicating that Windows could not search for new updates. Click on try again, what finally made me here.

  See: How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  In addition a report with all relevant information such as the operating system of Windows you use, including service pack level, what you use internet security and if necessary what error messages get you.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.