Not be able to debug on the device

Similar Questions

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• Fastest way for debugging on the device of JDE

  Hi all

  I'm new to the development of BB and struggling to find a way to debug on device effectively.  My application has a lot of comm of bluetooth in him so most debugging should occur on the device instead of Simulator (please, correct me if this is not true).  Here's my development/debugging process.

  1. change the code

  2. generate the code

  3. the signal code

  4. connect device to Desktop Manager via the USB cable

  5. delete a previous version of my application

  6. load the latest version of my application

  7. connect to the device using JDE

  8. install a device app

  My quesitons are...

  1 should I sign the code whenever I have rebuild?

  2. is there a more effective way to get the latest version on the device instead of uninstalling then reinstall via Desktop Manager (it takes forever).

  There MUST be a better way.  Thanks in advance to all those who answer.  =)

  1. Yes, you sign cod every time after reconstruction you have for debugging on the device.

  2. you can load application in the device in various ways. If you use the Desktop Manager, you need to go if the steps you mentioned.

  But most developers use javaloader (JDE bin directory) to get the latest version in the device during development.

  To do this, run the following command from the bin directory:

  JavaLoader-u load applicationName.cod

  Also take a look at the article for details on loading the application on the device.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800647/How_To _...

  Concerning

  Bika

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Debugging on the device?

  Newbie here. I'm finally able to debug on a real device, 9330 which shows:

  6.0 bundle 2333 (v6.0.0.524, platform 4.4.0.438)

  I write apps targeting the 5.0 SDK. I guess from the above that the camera itself is version 6.0.0.524, is this correct?  So where can I get the specific Simulator for this?  None of the 4 last digits Curve 9330 simulators match. (I am trying to eliminate all the 'cannot find debug file"nonsense!) is there any detailed white papers on debugging on the correct device?  Also, I try to use Eclipse.

  Thanks in advance!

  All available BlackBerry smartphone simulators are available for download here: http://us.blackberry.com/developers/resources/simulators.jsp

  It may not be a release of Simulator for all versions available for download.  But we are always adding more, so you can keep an eye on this page for updates.

• Comm port not detected by VISA / MAX after the device power cycle connected

  I have a device communicating via USB virtual comm port. The device and labview program both work very well, most of the time. The program is designed for the automatic connection for the connected equipment. It works perfectly when I unplug and reconnect the USB cable.

  However, if the unit power cycled as the USB cable is connected and the program/vi is running of things go wrong. The device enters a phase of boot loader for a few seconds to the power upward, if labview tries to query the port comm during this phase the comm port is corrupted in some way and is no longer recognized by VISA / NI MAX. However, other programs, hyperterminal, etc device manager can see and communicate with the port when the boot loader is complete. For Labview / NI MAX to see the port I have to physically disconnect the USB cable. The program does not need to be restarted in order to detect the port comm again and, infact, labview is restarted or my compiled program does not solve the problem. Physically disconnect the USB port allows visa / MAX OR see the port is connected.

  It seems to me that there is a problem with VISA where somehow if a device is not correctly identified by VISA during the first attempt it just does not take into account the port until a physical intervention. Is there a way to force VISA to reassess completely all connected comm ports?

  Hello MJanus,

  As far as I know, most of the virtual com ports are not fully supported by VISA so some quirks in its operation are to be expected: http://digital.ni.com/public.nsf/allkb/6E1922B526572CB8862571AA00544057?OpenDocument

  Officially, we do not support the use of com virtual ports, if unfortunately, the feature you have now is probably as good you'll be able to get with this configuration. I know it's not the answer you were hoping to hear and I apologize for the inconvenience, but it is not really possible visa work well with all software virtual com port due to the wide variety of products available.

  Kind regards

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• I can copy a URL, but may not be able to paste into the body of an e-mail message. Also the hypelink doen't it. I don't have this problem with Internet Explorer...

  When I copy a URL and go to paste it into an email, it will not stick. Another box opens. I can paste the URL in the subject line, but doesn't hyperlink it. (blue) When you use Internet Explorer, I don't have this problem. I'm new to FF with a new computer.

  Paste a link in the subject line does not a link so that the part is normal. But being not not able to paste into the body of the e-mail is not. I can't think of a reason that would happen. What email program are you using?

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Not be able to reverse engineer the data store by using technology such as postgres

  Hello
  
  When I am creating a data store for postgres using reverse engineering process he gives error jdbc.
  
  Then we created the data store manually by using the same schema logic and used in the interface and it was working fine.
  It is not possible to manually create all the data store for postgres we need in my project.
  
  Error details:
  ODI-20131: unable to retrieve a list of tables
  oracle.odi.core.exception.OdiRuntimeException: java.lang.IllegalArgumentException: could not load driver JDBC [org.postgresql.Driver] class
  at oracle.odi.core.datasource.provider.AbstractDataSourceProvider.configure(AbstractDataSourceProvider.java:107)
  to oracle.odi.core.DataSourceManager$ LoginTimeoutDataSourceProviderProxy.configure (DataSourceManager.java:303)
  at oracle.odi.core.DataSourceManager.createAndConfigureDataSourceProvider(DataSourceManager.java:226)
  to oracle.odi.core.DataSourceManager.access$ 0 (DataSourceManager.java:206)
  to oracle.odi.core.DataSourceManager$ 1.create(DataSourceManager.java:76)
  at org.springframework.util.CachingMapDecorator.get(CachingMapDecorator.java:152)

  Your postgresqldriver is missing (in the folder userlib/agent)-able to load JDBC driver class.

  Similar problem for SQL Server - unable to connect to SQL Server 2005 using ODI 11 g

• not able to connect to the device for the application deployment native bb10

  
  

  What operating system do you use?  Have you installed the latest version of BlackBerry link?  You have a firewall or a VPN running that could block the connection?  You are able to connect via WiFi?

• Network Controller is not found"error message appears in the DEVICE MANAGER

  Hello! I installed WIN 7 Prof 64 bit on my laptop Compaq Presario CQ62-410US and Device Manager shows that the ETHERNET CONTROLLER is not installed correctly. I've been using the appropriate drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5048...

  I tried to find a solution here:

  http://support.HP.com/us-en/document/c02592699

  "But the" 'LAN Power Saving ' option of "System Configuration ' component is missing.

  I uninstalled installed new driver LAN wireless with no result.

  Thank you very much for your help! Miron

  Hello:

  See if it works... Now, it's to install the Ethernet controller (wired), not the wireless network controller.

  Make sure that you have installed the first Intel chipset driver, then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-87204-1&cc=us&DLC=en&LC=en&OS=4063&product=5048735&sw_lang=

  Then install the ethernet driver second on the list at the link below:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• May not be able to connect to the OEM console through the sys user

  Hi all
  
  I performed below the OEM configuration steps in windows XP
  
  From sqlplus:
  
  change the dbsnmp user account unlock;
  change user dbsnmp identified by dbsnmp.
  
  $ emca-rest create
  $ emca - dbcontrol db config
  
  
  But when I tried http://hostname.domainname.com:1158 / console/em/aboutApplication
  
  I am able to login the user dbsnmp with NORMAL connection and not able to connect to SYS or SYSTEM user with SYSDBA connection.
  
  Please help me in this regard

  You use the password file? Is user OS DBA group?
  Could connect you as sysdba command line?

• Why an MP3 would not be able to load in the cloud?

  I got game and a few times recently an MP3 of a song created from a Youtube video is not accepted in the cloud in iTunes. I have the icon of the barred dustbin cloud. No idea why?

  Hello

  How did you convert the video to mp3? Maybe the format is not eligible.

  What bit rate is MP3? If it is less than 96 Kbps, it will be ineligible for iTunes game.

  Jim

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.