Not compatible with Windows8 printer

Similar Questions

• "Black ink cartridge is not compatible with this printer" message - 56 HP deskjet 5552

  I just replaced my HP 56 cartridge in my old printer HP Deskjet 5552 - I use an iMac & when I try to print, I get the message error "black ink cartridge is not compatible with this printer.

  It makes no sense that I replaced the cartridge many times before without ever having a problem.

  I have already returned a cartridge to the store where it was a problem with the cartridge itself, but the same thing happened with a second.

  Any suggestions gratefully received.

  Thanx, Alison

  Hello

  It usually take a few cleanings to operate.

  Best regards

  ERICO

• Black HP 802 ink cartridge is not compatible with the printer HP Deskjet 1050 - J410a [model: CH346A].

  I'm Sharjil Ahmed of Kolkata, in India and had bought theHP Deskjet 1050 All - in - One Printer - J410a [product model: CH346A] an online shopping website www.crazeal.com on December 18, 2011, where product information included that I will be provided 62 small HP black cartridge HP 62 small tri-color ink with the product. However, the box consisted of HP 61 small black ink cartridge HP 61 small tricolor ink cartridge.

  Also, I've registered my product on January 3, 2012 and found that ink cartridges that are are compatible with my printer 802 HP ink cartridge black (CH563ZZ) and bought the same, but when I tried to take a print, a message appeared that the HP 802 black ink cartridge is not compatible. That is why I contacted the service center HP of our region where I was informed that compatible with my printer cartridge is HP 61 only and the material of my printer is not compatible HP 802.

  Please help because I was not able to find HP 61 anywhere in my community.

  [Personal information]

  Hi sharjilahmed,

  802 cartridges are right for your region. If you bought the printer from one region other than the India, you will need to contact technical support, so they can help the region getting changed on the printer. Contact for the India numbers supports below.

  DeskJet, inkjet all-in-one, LaserJet, LaserJet all-in-one entry level:

  0047 200 1800, 1800 425 7737.
  0124 387 7300, 0124 234 0917

  

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 95 version of Print Shop Deluxe is not compatible with Windows 7. If anyone can solve this?

  . Windows 7 64 bit printing problem

  I used the Windows 95 version of the Print Shop Deluxe on XP for years without problems, but now I just got a new laptop running Windows 7 (64 bit) and the CD will not download. Dialog box shows is not compatible. Anyone has any ideas, the update to download this CD please?

  Its unlikely that the PrintShop version designed for Windows 95 uses some 16-bit code that is not compatible with 64 bit versions of Windows 7.

  Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:
  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC
  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• HP Deskjet 1050 J410 printer is not compatible with windows 8?

  Hi, I just bought the HP Deskjet 1050 J410 series printer. When I try and run the cd on my windows laptop 8 it comes back with a message saying "your OS system is not compatible with the series hp deskjet 1050 J410." I was wondering if you could help me with this? Thank you

  Hello dhwany,

  Download the driver on the web.  You can follow the instructions to install here.

  Please let me know if this helps solve your problem.

  Good luck!

• Series Deskjet 1000 - J110 printer but drivers are not compatible with Mac OX 10.4.11

  I bought a Deskjet 1000 Printer series - J110 printer but drivers are not compatible with Mac OX 10.4.11, which is the mode of systemon my macbook. What can I do to solve the problem?

  I'm sorry, but you won't be able to use it with Mac OS 10.4, this model is supported by Mac OS 10.5.8 and above.

  Most of the latest models sold today is supported by 10.5 and above.

• I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the paper size selected is not compatible with installed support." Anyone have this problem?

  I have a Mac and added the DNP DS80 printer but it will not let me print. He said "the size selected is not compatible with the installed support." All the answers for this?

  Refer to the discussion: Lightroom v4, v5, v6 Will not print to a DS40 printer

  Kind regards

  Mohit

• The information about the registered printer are not compatible with this version of Photoshop

  Hello

  I hope someone can help us. I'm a COMPUTER technician in a school, we have about 500 machines to Windows 7 64 bit with around 600/700 users - 200 machines have the CS5.5 Master Collection on which is installed. We have an intermittent problem with printing from Photoshop (32-bit and 64-bit versions). Our printers are for the most part, the (modern) HP LaserJet printers, but we have an inkjet Epson B-510DN and some copiers Xerox too. The drivers are all installed on a central print server running Server 2008 R2 and shared via the client computers group policy.

  In the rooms where Photoshop is installed, intermittently when a student goes to print, we will receive the following error message:

  Saved printer information are not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before you print.

  Photoshop will be gray and then the button "Print" and will not let the user print again. The strange thing is that we can still print from other software such as Microsoft Word or Microsoft software or even non - same Illustrator will print. It just seems to be Photoshop it's has all the problems.

  This occurs when you print to a printer on the site, 90% of whom are HP. As a general rule we set up all of our HP printers with HP PCL6 universal print driver because it facilitates the management of the various models of printers, and we did not limit ourselves atall yet. We are aware that the Adobe software is "preferential" for Postscript drivers, but aren't our printers, HP PCL is their mother tongue. We tried to change a printer for the Postscript UPD driver to test but he brought no improvement. We also saw the issue in depth altogether with our Epson B-510DN, which is configured with the newer model specific driver Epson as uses our photography service. As we see with different printers, I don't think the printer drivers are to blame - unless someone want to prove me wrong.

  Like I said the problem is intermittent, and we are having trouble tracing it down for a user, computer, or a software problem, as it is so intermittent. Has anyone another considering cela and managed to overcome? Given that it only happens in Photoshop is this a bug that Adobe have recognosed and fixed the CS6? The only solution we found that he must go in printer, change the default printer from one to the other and vice versa - cela seems to shut up Photoshop.

  Thank you, Dave.

  Here's the answer that I received from Adobe, and it worked.

  'Ok. Try to open 'print', while holding the space bar; He ignores all the saved values. "Also, make sure that the correct printer that he set as default.

• Information about the registered printer are not compatible with Photoshop elements 11

  Hello - having used successfully PSE11 to print pictures on my printer Epson Artisan 810, printer died and was replaced with a printer Epson Artisan 837.  The new printer works on ALL my other applications EXCEPT I get the following error message after hitting "print" on Photoshop elements 11.

  Message:

  Saved printer information are not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before you print.

  

  You can see on the screenshot attached as the Epson Artisan 837 is a validly installed printer.  All advanced settings were available for selection/editing, and all the printer drivers are up-to-date.  In addition, uninstalled and reinstalled the printer without the resolution of the problem.

  Can someone tell me please in the right direction to solve this problem?
  Thank you, Debbie

  Running:

  Windows XP sp3 (updated)

  Go into the control-> devices and printers-> and rename your printer or remove it and reinstall the drivers and rename the name of the printer. Looks like the Epson series drivers could come into conflict here that would be common for Epson series of printers in this category.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• HP OfficeJet Pro 8500_A910_231 is not compatible with Windows 8 CP

  Hi HP supports,

  I was wondering if someone adds a solution so that the

  HP OfficeJet Pro 8500_A910_231 work in Windows 8

  Consumer overview yet. Because every time I try to run the

  Setup it tells me that this printer is not compatible with

  My operating system.

  Sincerely

  Jason Michaud

  Hello Jason.

  Print and scan drivers for your HP OfficeJet Pro 8500 are already part of the overview of consumer Windows 8.  You should be able to print and scan by simply connecting your OfficeJet to your pc.

  Good day!

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• Not compatible with my photosmart 5510 564 HP cartridges

  Hello

  I have a photosmart 5510 printer I bought at the Japan. It came with a set of 178 cartridges.

  I moved to the Korea and bought a set of new cartridges HP 564 here because 178 cartridges are not available in Korea. In the box of cartridges it is said that the cartridges are adequate for the photosmart 5510.

  After the installation, I get an error "incompatible cartridge".

  If I use sureSupply via the HP utility to find compatible cartridges and I select the Korea as my current position, I get the following message:

  You have selected the following location: Korea

  Is this your current location? We have detected that the cartridges purchased at the location you have selected will not work with your printer. Common causes of this include:

  • you bought your printer in another country
  • you bought your printer on the Internet from a supplier in another country.
  • your printer has been provided by your employer who has moved to another country.
  • you have selected the wrong location on this Web site.

  Your printer can be reset to work in the location you have selected: Korea

  Contact HP support for more information on having your reset printer to work in this place.

  Below that there is a link 'Contact HP for support product' but if I click that I find myself on the sureSupply page and I have to choose my model and location. If I do that, I see a list of 564 cartridges I buy.

  Top of the page, there is a link "Contact HP" but this link (a javascript link) does nothing (in safari on OSX).

  How can I have my printer reset to work in Korea (with 564 cartridges)?

  @ JeroenKorea - if you bought the printer in an area and moved to a new area, you must call customer service to ask a "regionalization Reset." Avoid any accusation to this effect; It is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

  See the document on regionalisation.  I'm sure you already used this link, but I want to offer again.

  http://support.HP.com/us-en/document/c02558798