'Not connected', cannot communicate with Adobe servers

Similar Questions

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• Printers HP B110a cannot communicate with the laptop, but both will be connected to the router?

  OK, here's an interesting problem that has been banging my brain for hours, one of my friends has a HP Photosmart all in one printer B110a. Now I can get the printer to connect to the wireless router, no problem. Can I also have the phone to connect to the router, the problem is that the printer cannot communicate with the laptop. The router brand and model is the Linksys wrt54g

  Now, I took my friends laptop home and tried to see if she could detect my wireless printer model different on my router which is a TP WR340GD I went in devices and printers, and went to Add a printer and Add Printer wireless, it instantly detected my printer via the wireless network. There is no problem on the side of the laptop. I am sure that any firewall on the laptop was turned off when I tried the connected printer.

  So now I have my friends printer here with me and decided to try and see if I could detect the HP Photosmart printer All In One Printer on my laptop on my TP WR340GDwireless router. Yet once, it worked perfectly and it has detected the printer and works wireless without fault.

  I'm down now to the conclusion that the problem is with my friends router Linksys wrt54g I'm gone in the settings of the router, change the wireless channels, changed security between WEP and WPA/WPA2 and AES AND TKIP wireless and this does not solve the problem.

  I can access to the Photosmart B110a: the Web server integrated in a browser ONLY if I have the laptop to the router physically connected by Ethernet cable when trying to access my router from a friend, but I can access through wireless on my router. The problem is probably something very simple that I forgot, but I was more all I can think that I tried to reset harder than the printer cleaned the network settings on the printer as well from the display of the printer menu.

  I'm really lost now, someone at - it suggestions?

  Hey pcwizard, ok, I checked the router settings and Mac filtering turned on, so I decided to reset the router, it restored to factory settings. Re-Setup wireless and once again I tried, still had no luck with the laptop to communicate with the printer.

  in any case, I decided to connect the cable from the printer to the laptop and took the USB to wireless Assistant. As I reinstalled it the printer using the wired method.

  He told me that the rules of traffic incoming and outgoing firewall stopped communication between devices and assign port numbers 427-9000 etc.. However, I had turned off all firewall, Windows and Norton 360, which since then, I've replaced with a better anti-virus software.

  I went into the settings of the router, port forwarded the application numbers, tried again and is again no luck. I'm usually pretty good with computers, but it was really annoying me. So I went and had a coffee and a brainwave came and I decided to see if my laptop could detect and connect the printer to the router. As soon as I tried it, he finds and the printer has detected immediately.

  Then I thought there must be something on my laptop to friends who may be at the origin of the problem, when I looked, I noticed that my friend had the old software Vodafone Mobile Broadband running in the background which was connected to the router.

  So I closed and turn it off and tried again adding printer. SUCCESS now detects it and the printer is now communicate and respond with the laptop. I'm guessing that the Vodafone Mobile Broadband have a built-in firewall blocking the communication. However it is strange because it worked without problem on my printer at home, so I wonder if some how blacklisted broadband Vodafone IP address of the printer at a time on their router.

  I'm so happy, it's finally done, a lot of hours and work, and after all this time it was * beep * Vodafone.

  in any case Pcwizard I thank very much for trying to help, no doubt has given me a few ideas.

  Thanks again!

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

  I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?

  I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...

  What operating system?

  If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• BlackBerry Z10 Z10 suddenly stopped synchronization of calendar and contact - link gives BB cannot communicate with connected mssg but displays device

  I think that BB link updated the software in March 2015.  I had been very good sync with my laptop Windows 8 with the Outlook calendar and contacts, but this week it stopped.  BB link watch Z0 connected, but says cannot communicate with the device.  I tried the solution of knowledge base - leave plugged phone with a USB cable, power phone off, then back on donkey wait 3-5 minutes for the pilots to complete loading - but none help.  I rebooted the computer and the Z10 several times, but no luck with the synchronization.  Any help is appreciated!

  Try the following steps, which will completely remove all traces of BlackBerry-link device driver entries and may solve your problem:

  1. Uninstall the BlackBerry link.
  2. Open the Device Manager by pressing the Windows key + R on your keyboard type devmgmt.msc , and then click OK.
  3. Click view , and then click Show hidden devices on the menu that appears.
  4. Expand the BlackBerry section by clicking on the + symbol next to it.
  5. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • BlackBerry smart phone
  6. Expand the network adapters section by clicking on the + symbol next to it.
  7. Right-click on the following, and then click Uninstall. In the dialog box that appears, select delete the driver for this device. If more than one of each of the following entries appear, remove them as well.
     • BlackBerry smartphone
     • Tethering BlackBerry smartphone
     • Virtual private network of blackBerry
  8. Restart the computer.
  9. Reinstall the latest version of BlackBerry link.
  10. Try to reconnect your BlackBerry Z10 to the computer and see if she is able to communicate with the BlackBerry link.

  After back and let us know if it works for you.

• Cannot communicate with the first DNS Server (169.126.63.1)

  Hello
  I have recently had problems with my internet connection and therefore cannot get on the internet at my place when it used very well. I have a wired connection usually, but tried to install a router but now even the wired connection doesn't work and I get the message "Cannot communicate with the first DNS Server (169.126.63.1)" I tried many things and even reformatted my hard drive, do a reinstall system, different setting reset and still it does not work. Hope someone can help me in this situation. Thanks to a bouquet.

  Here is my information

  Hello

  1. have you done any software or hardware changes to your computer recently?

  To work with this issue, I would say that you try the methods below to resolve this issue.

  Method 1:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2:

  
  Step 1:

  Let us reset TCP/IP and check.

  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357

  Step 2.

  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in the installation - basic configurationcategory.
  3. scroll down until you see "DHCP Server"- if it is disabled, select 'Enable'.
  4. enable DHCPif you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click ' Save Settings '.

  Step 3.

  1. click Startand then clickControl Panel.
  2. go in network and sharing Centerand then click onchange adapter settings.
  3. right click on Local area connectionand selectProperties.
  4 Select Internet Protocol Version 6 , and then clickProperties.
  5. click on get automatically a DNS server address, then pressOk.
  6 select automatically an IP address to get.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also visit these links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Hope the information is useful.

• Cannot communicate with DNS sever

  Hello

  IM sharing one House with 3 others, we recently had the internet but I can't connect to it while everyone can. When I connect just says local connection, when I diagnose the connection an error message appears saying "cannot communicate with the DNS server. I've never had this problem before and are still able to use also wireless devices and connect to the internet, it just seems to be this router im having a problem with. Ive tried several suggestions found on the internet and none have succeeded, so I was wondering if someone could help me.

  I'm not sure what information you need to know to help so im just stuck it:

  C:\Users\Kayleigh>ipconfig/all

  Windows IP configuration

  Name of the host...: Kayleigh-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel(r) PRO/Wireless 3945ABG Network Con
  connection
  Physical address.... : 00-19-D2-86-0F-71
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::283b:e88b:bf85:ab79% 10 (Preferred)
  IPv4 address: 192.168.0.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: November 16, 2009 18:09:40
  Expiry of the lease...: November 17, 2009 18:27:23
  ... Default gateway. : 192.168.0.1.
  DHCP server...: 192.168.0.1.
  DHCPv6 IOOKING...: 251664850
  DHCPv6 DUID customer...: 00-01-00-01-0E-7B-45-98-00-A0-D1-6D-87-63

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel(r) PRO/100 VE Network Connection
  Physical address.... : 00-A0-D1-6D-87-63
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {A66451AD - 40 C 4-4DFD-8693-2AB69727F
  E39}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 16:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5291AF49-A5C9-4154-90AC-597BAF10F
  533}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 18:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {ECA18F57-EF5B-4DA4-8331-B99497389
  06TH}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 19:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {ECA18F57-EF5B-4DA4-8331-B99497389
  06TH}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 21:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {ECA18F57-EF5B-4DA4-8331-B99497389
  06TH}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 22:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {ECA18F57-EF5B-4DA4-8331-B99497389
  06TH}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 24:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 25:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {ECA18F57-EF5B-4DA4-8331-B99497389
  06TH}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Thank you Kayleigh

  Hi, I just contacted my IPS they helped

• When you use network troubleshooting in Windows, get message Windows cannot communicate with primary dns server

  Original Title2: Windows 7 - Internet
   
   
  Original title: can someone help me?
  I use a PC at home with Windows 7.  Whenever the failure at home, I have problems connecting to the Internet. Whenever I try to go on Youtube or another website, I get "Internet Explorer can not display the webpage." Now, my internet and router are configured correctly, then why is what is happening? I ran Diagnostics and got the "Windows cannot communicate with primary DNS server." I tried to reset the TCP/IP settings. It did not work and I did three times! I tried to check the properties of my network when I went to diagnose the problem, he threw some stuff on the property sheets open and close before you reopen the properties. If someone could give a foolproof solution for this annoying internet problem I would really appreciate it. Thank you.

  Hello

  Welcome to the Microsoft community!

  While using the network troubleshooter utility in Windows, you get message that Windows cannot communicate with primary DNS server.

  What is the exact message that you get when you try to check the settings of network domestic?

  I suggest you to change network settings:

  Step 1: change network settings of the router

  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  b. make sure you are in Setup-> basic configuration category.
  c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
  e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  f. scroll down and click 'Save Settings'.

  Note: The procedure may slightly vary with different routers. You can see the manual or contact ISP for assistance.

  Step 2: change in the computer network settings

  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• computer cannot communicate with over 8600

  My 8600 Officejet Plus works fine on a wireless network for about a year, but after restarting the computer yesterday morning, I get the message "...". cannot communicate with the printer.  I tried all the suggestions below without result.  I can access page ews from the printer to the computer and I get my apps on the internet every night. I have Ran the network to the printer and all past test.  The Network Setup page shows the printer is connected and ready for the correct ip address.  I ran the HP print and scan doctor and you can see that everything works.  I also ran the troubleshooter in Windows and it showed no problem with 'the printer is ready.  I unplugged the router, printer and restarted Windows.  I removed the printer via the "devices and printers" window, as well as the HP software.  I reinstalled the software, connected the printer and run the wireless configuration.  I've updated the ip address on windows.  All to nothing does not.  Any help would be appreciated.

  Running Windows 7 Home Premium

  Belkin N router is

  In fact, I found the problem.  It seems to run a malicious program to the startup disable Norton anti-virus and changed several keys in the registry that prohibits the computer to communicate as well as Outlook unauthorized access to my POP3 account and who knows what.  I managed to uninstall Norton, then re - install a newer version.  This enabled Norton run a quick scan before restarting.  After re-booting, Norton has been disabled again.  I used Norton Erase to analyze and repair the registry that solved the problem.  Immediately after re-boot after the last scan and fix the network Windows Test Page that announces the printer has been installed on persistent organic pollutants.

  Thanks for you quick response, however.  I suspect a virus when I tried, without success, to open Norton in order to disable the firewall and couldn't.

• SE error message saying the printer cannot communicate with the computer cause of blocked files.

  Original title: DRIVER of PRINTER BLOCKED

  A COMMS. ERROR MESSAGE ME SAYING THAT MY PRINTER CANNOT COMMUNICATE WITH MY PC. AFTER COMPLETING THE USUAL HARDWARE CHECKS THAT I USED THE SERVICE CENTER OF DELL ONLINE THAT REMOVAL OF TWO STATES ' DLEACOMS. EXE' AND ' DLEAWBGW. EXE ' MUST BE RELEASED TO ALLOW MY PRINTER TO WORK.

  I SEE NO REFERENCE TO THESE FILES IN THE WINDOWS FIREWALL AND TO THIS DAY THE ONLY WAY AROUND THIS PROBLEM IS TO REMOVE THE PRINTER AND REINSTALL, BUT IT WORKS FOR A SHORT PERIOD. I USED (BY REMOTE CONTROL) THE STATION OF SOLUTION DELL THREE TIMES BUT EVEN THEY EVENTUALLY REMOVE ALL AND REINSTALL THE PRINTER.

  SOMEONE HAS AN IDEA HOW THESE FILES CAN BE UNLOCKED?

  I suggest to disable CAPS LOCK key since your message is all in the capital and difficult to read. Have you tried to add to the exception in the Windows Firewall? Try also to change your network connection for work or at home instead of public. Also make sure you installed the latest version of the driver and are compatible. Also try to run the tool:

  http://support.Microsoft.com/mats/printing_problems/

  If the problem is not resolved, contact Dell customer service.

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• MG6120 - cannot scan error "cannot communicate with scanner.

  Hi, I have a Mac Book Pro with OS 10.10.5 (Yosemite).  I have the Canon MG6120 printer.  Since I updated to Yosemite, I'm more able to scan using the MP Navigator ex software  I get the following error message:

  "Cannot communicate with the scanner.

  Cable may be disconnected or scanner may be turned off.

  Check the status.

  Scanner driver will be closed.

  2.1.0.

  The only way I can scan is by using the touchpad on the printer and saving the scan on a USB key.

  I went to the page support and downloaded the latest drivers, but he has not made a difference.  I need to remove the printer and re - add again?

  You will appreciate greatly any help or advice.

  Thank you very much

  Alice Berman

  Hello.

  If the printer is used via the USB port, make sure that the printer is connected directly to your computer.  Avoid using USB hubs or extension to connect devices.

  If the printer is used with wireless, please proceed as follows to save your scanner to work wireless on Mac:

  1. click on the "Canon IJ Scan Utility" icon on the top of your screen and choose "display settings." (Located near the clock, looks like a scanner open with an arrow below). For the latest operating systems, the program can be located in the Canon Utilities listing applications.

  2. in the next screen, make sure that the network version of the printer is selected instead of "do not use". The network version will be a long series of numbers next to him.

  3. click on "Scan-of-operation-panel-settings".

  4. a new window should appear, make sure that the printer is selected, and then click OK.

  5. click OK to exit the utility.

  Once done, do the following:

  1. open the Application folder.

  2. open Canon Utilities.

  3. open MP Navigator.

  4. Once opened, click on the "Settings/preferences" button at the bottom.

  5. in the menu drop-down "Product name", select the Network Scanner.

  6. click OK at the bottom.

  Once done, try to scan from MP Navigator.

  If you continue to have difficulties, find more help contact us.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• HELP: What router supports VLAN? -I wish both groups cannot communicate with each other.

  Hi all

  I have 5 wireless devices must connect to the router.

  I want to divide it into 2 groups:

  That is to say, 1, device A, B, C, group 2, device D, E.

  I would like two groups cannot communicate with each other.

  I've heard, it can be done by VLAN, is e2500 can adapt to what I need?

  What about EA3500 and EA4500?

  I use G wireless, is what it means that ea4500 is out of choice even if it supports VLAN?

  Thank you all!

  Evil

  Thanks for the clarification for the OP

  FWIW

  is this an alternative to routers that do not support of VLAN, to do what you want

  http://www.SmallNetBuilder.com/lanwan/lanwan-HOWTO/32486-how-to-segment-a-small-LAN-using-tagged-VLA...