Not detected in Weblogic Installation of JDK

Similar Questions

• Why Microsoft Security Essentials not detect and prevent installation "Vista Anti-Spyware" Trojan?

  I had the ' Vista Anti-Spyware ' Trojan horse to visit a web site. Why Microsoft Security Essentials does not detect the Trojan horse? He diverted Security Essentials and rendered inoperative.

  Hello

  you will need to ask this question about MSE in the Microsoft Security Essentials Forums the link below

  http://answers.Microsoft.com/en-us/protect

  Here's how to remove this Malware

  Read this information

  Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• HP X 360: hardware virtualization enabled in the BIOS but not detected by the installation of Intelhaxm.exe

  Hi all

  I'm trying to get Android studio works on my 360. Everything is fine until you try to run virtual device/emulator.

  This does not work because the Virtual Machine is required. When I looked in the BIOS I was surprised to see this small handbook has the functionality that has been disabled.

  I now activated but still not detected by the software. Can anyone help with this?

  See you soon

  The problem was Avast antivirus. I uninstalled and hey presto, intelhax went very well.

• Equium U400-145 - HARD drive not detected during XP installation

  I am trying to install XP on a new HDD on my Equim U400-145.

  However, during the installation of XP it says that the installation program "found no hard drives installed on your computer.

  The HARD drive is seen in BIOS and I checked in another system, and it works fine.

  Anyone can shed some light?

  Before installing Windows XP, you need the Intel Storage Manager. All other drivers and tools, you need only after installation.

  I think that you should only read hundreds of discussions here in the forum and check this Toshiba of the area of the FAQ document:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good luck!

• built in web cam is not detected by my PC

  my computer does not detect my built in webcam and can't find anywhere in the computer or the Device Manager you can help me please, it has been working fine all of a sudden went

  Hello, Jaimetuyub,

  Computer brand & model with Windows OS, please.

  What changes have been made before the webcam not detected?  New installations of hardware or software?  Windows updates?  Analysis of security?  Virus removal?

  Have you tried a system restore to a date and time before the disappearance of the webcam?

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Open the Device Manager

  In the menu, select view > show hidden devices

  The webcam is listed under other or Universal Serial Bus Controllers?

  Imaging devices?

  Start > all programs – computer Acer so, search for the Crystal Eye software

  In Control Panel > uninstall program, look for webcam software.

  Uninstall the software

  Restart the computer

  Go to the manufacturer website and reinstall the software

• Flash drive is not detected

  Original title: Flash drive problem

  I got my player wiped clean flash caused by a virus. Now, when I insert the disc nothing happens. I am not very informed when it comes to these things, but I thought that my data would be entered on the drive again, just like the first time around. Made null and void by car when I had the deleted info?

  I have a laptop Compaq Presario with Windows Vista Premium. Also, I just had the motherboard replaced, but I don't think it would have something to do with it. I appreciate your help!

  Thank you
  Elda

  Hi Elda,

  Thanks for posting the question in the Microsoft Community!

  The USB is not detected.

  1 have you tried in different ports?

  2 are you able to use other devices USB?

  I suggest you follow the steps:

  Method 1: Run the fixit

   

  See the site:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Then, as all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the steps:

   

  a. click Startand then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click on to expand Bus USB controllers, right click on the controller host, click on uninstall and click OK.

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  d. repeat the substep c to uninstall all items under Bus USB controllers.

  Now, restart the computer, and all USB controllers will be installed automatically.

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Installation of WebLogic with IBM JDK

  Hello

  We plan to install Oracle Fusion Middleware components 11 GR 1 material (+ 11.1.1.6) on IBM AIX 64-bit power servers. When I checked the IBM JDK 7 SR3 + IV33133 matrix of certification is the Certified version of the JDK for installation of weblogic.

  Please help me on how to exactly get/download the IBM JDK 7 SR3 + IV33133? I checked the IBM JDK download page and not getting exactly how can we SR3 + IV33133?

  Best regards

  Amandine

  Hi Prakash,

  I guess the sign '+' in the IBM JDK 7 SR3 + IV33133 is a little tricky. I doubt that it is has added IBM JDK 7 SR3 with IV33133.

  I spent some time on this installation of JDK and come to know that the 3rd third-party products that are certified to operate only on specific versions of IBM's Java for AIX can be downloaded from IBM Java ISV download page.

  Here are the steps I followed to download the IBM JDK 7 SR3 + IV33133

  1. go to the IBM Java to download site software at the following ADDRESS:

  https://www14.software.IBM.com/webapp/IWM/Web/preLogin.do?lang=en_US&source=SWG-ibmjavaisv

  2. open a session using your IBM ID and password.

  3. enter MJ3D7TQGMK access key partner in IBM's Java for software page

  4. click on submit

  5. on the IBM SDK interim fixed (iFix) to the Oracle page, you will see the below JDK versions that are adapted exactly than that provided in the matrix of certification.

  • pap6470sr3ifx-20121213_01 (SR3 + IV33133)
    Java7_64.0.0.61.tar.gz (115 MB)
  • pap6470sr3ifx-20121213_01 (SR3 + IV33133)
    pap6470sr3ifx-20121213_01 - sdk.tar.Z (184 MB)

  6. install the JDK

  Please can you confirm that this procedure is correct?

  Best regards

  Amandine

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• SSD not work / be detected - error Windows installation on laptop HP Dv6-1149wm

  Well, well, I tried three different nine ssd: 1 kingston v300 120 GB SSD, 2 840 120 GB ssd samsung, and 3 an another kingston v300 120 GB SSD. Tried in this order.

  The Kingston-discs Are not detected by the bios no error or nothing, nada. When it is attached to another computer running windows drives are detected properly. nothing wrong with that.

  The Samsung player- It was the second drive I tried. It has been detected by the bios but diagnosis gave me the '303' fast error. When you install windows via USB, it asked me to drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition or format. Not even partition the drive via the command prompt by using diskpart worked. It returns an error indicating an incorrect setting or something like that (Note I could partition the drive here but not format NTFS).  I could manually partition on another system completely. Formatting/partitioning via another system has allowed me to completely enter the installation up to the point where it says "installation of features" then it gives me an error saying that it was impossible to define the local system - or something like that. In addition to that I also tried to install windows on the other system that was working fine but would not transfer to the laptop. I also tried the previos on the ssd drive cloning, but when booting the computer gave me a disc read error.

  My personal desktop (OCZ Vertex 4 128 GB) drive- it has worked. Diagnosis of computer picked up fine and did not point out the mistakes. The only thing is that I tried to install windows on it because I already had a facility there.

  My thoughts– my best guess is that there is a kind of incompatibility with the drives firmware and the BIOS of the computer. The Bios (Insyde h20 F.21) is very limiting in a first time, too easy to use, and not much to do here, second he has not seen an update since 2011. Seems to me that the SSD technology may be advancing faster that HP can follow their updates (this of course assuming it's the BIOS that is at fault)

  I am open to suggestions for ideas, basically anything that can help me at this point. I spent many hours on it and I turned empty.

  In the end, I ended up putting 4 vertex in there. For some reason, the mobo refuses to recognize the kingston ssd. The samsung, I can't say with certainty because it detected well, but wrong on everything. Must have been a bad disc. It's weird that the manual says it does not accept the ssd because many old machines still accept DSS. Any ways long story short the the kingstons were not compatible, probably faulty samsung, the ozc was the only one that worked perfectly.

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• installation of Windows 7 does not detect drivers for 9500S 3ware RAID controller - 4LP

  I've been using 3ware 9500 s - 4lp raid controller without problem on xp64 os.

  I want to upgrade to windows 7, but after installation clean win7 does not detect my readers as unsigned drivers.

  PLEASE HELP ME!

  Please see: Windows 7 Compatibility Center

• Installation of Oracle 11 g R2 grid does not detect the ASM disks

  Hi guys,.

  I'm trying to install Oracle 11 g R2 RAC and as part of the installation of the grid, the Setup program does not detect the ASM disks.

  Here are the outputs for some commands.

  [root@rac1 ~] # oracleasm scandisks

  Reload from disk partitions: fact

  Cleaning up stale ASM disks...

  ASM disks scanning system...

  Instantiation of disk 'ASMDATA2 '.

  Instantiation of disk 'ASMDATA1 '.

  [root@rac1 ~] # oracleasm listdisks

  ASMDATA1

  ASMDATA2

  [root@rac1 ~] # ls - ls/dev/oracleasm/disks

  Total 0

  0 brw - rw - 1 grid asmadmin 252, 3 14 May 17:18 ASMDATA1

  0 brw - rw - 1 grid asmadmin 252, 2 14 May 17:18 ASMDATA2

  I already tried to reconfigure Oracleasm (oracleasm configure - i) but no luck.

  I would be really grateful for the help here as its been a few days now and want to complete the installation as soon as possible

  Concerning

  Praveen

  Thank you Ricardo, I see now the disks after you change the path from discovery to/dev/oracleasm/disks

  

• 5.1 ESXi does not detect my network cards during installation

  Hi I am trying to install esxi 5.1, but during the installation, I get an error not detected no physical network adapter and then abandons the instillation. I know that my network card is not detected until I have install the driver, but I don't know how I can install the dryers to exsi, during the installation of windows.
  

  When I try to search the compatibility guide I get no results.

  
  

  My specs are:
  

  MB: FOXCONN P9657AA
  BIOS VERSION: Not sure
  CPU: Intel (r) Core (TM) 2 CPU
  6420 @ 2.13 GHz
  2.13 GHz, 8 GB of RAM
  Memory: (DDR2 240Pins) (CORSAIR)
  VGA: NVIDIA GeForce 8500GT NX85T256H PCI Express X 16
  PSU: Not sure
  HARD DRIVE: 1 MAXTOR IDE HARD DRIVE 250 GB
  CD/DVD: LITE-ON DVDRW LH-20A1P SCSI CdROM Device
  OS: N/A
  Network cards: OnBoard LAN

  LAN Chipset - Marvell 88E8056

  Max LAN - 10/100/1000Mbps speed

  and a second NIC not sure of the brand, I pulled it on an old PC that I have laying around.

  Thank you

  network Marvell cards is not supported according to the guide of comptaibility

• Local storage not detected during installation

  Just got some new guests to, HP DL380 G7s... Using Smart Array P410i controller.

  When I boot on the CD to begin the installation, it is only to see my CF storage, none of my local storage.

  • Physically, there are two 146 GB drives in raid 1 + 0.  Of these 2 physical disks, there is a logical drive in RAID 1 + 0.  After that he did not detect the storage, I deleted the logical drive and recreated, with no change in the result.
    
  • BIOS is configured to use the first SA P410i controller.
    
  • HIS P410i appears in the VMware HCL for each version of 3.5 to 5 U2.
    
  • Am in the process of the firmware released May 5, 2011 download, but these servers came pre-assembled with a burn-in already made, and I guess the firmware is already aware of this latest version - will certainly know when download ends.
    

  I'm obviously doing something ridiculous and stupid, but I don't see what I'm doing wrong.

  It's basically not much you can do wrong and what you write on the configuration of the RAID that everything should be good. Can you confirm that the logical volume is detected by the RAID controller during startup?

  When you install ESXI volume - although local - probably will see the place under the remote storage. You can also confirm that it is not at all clear?

  André

• NB100 - 11G - HARD drive not detected during installation of Windows XP

  I have a Toshiba NB100 - 11G with Win XP Home and a 160 GB HD RAM upgraded 1 024 to 2 GB. Recently, I tried to install Win Pro SP3. However, it did not work and the message was that the hard drive was not recognized. I have no problem restoring with the provided Toshiba Recovery CD (which has Win XP Home).

  Does anyone have an idea why I couldn't install Win XP Pro? Could it be related to my RAM upgrade? (The only thing I changed.)

  Thanks for a response. Sincerely, Allan.

  Hello

  The problem is that you integrate the driver SATA Windows XP can detect the internal HARD drive. Otherwise, you get a blue screen or the HARD drive is not detected.

  With the help of nLite (freeware tool), you can create a new drive to install XP with SATA driver package. This is described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  If you have any other questions, you can also see similar forum topics. You can find hundreds of threads here in the forum about it.