Not enough space on the data store. Could not power on VM:No space available on the device

Similar Questions

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• The data store could not be found.

  Hello!

  I have Esxi installed 4.0 on HP DL 380 G6. I have 2 x SAS (2x146GB) drives and I have also attached storage iSCSI (from HP MSA P2000 G3). on which I recorded a few servers. When I run the script ghettoVCB I get the result:

  /SKRIPTA #./ghettoVCB.sh f lista g /skripta/ghettoVCB.conf
  . / ghettoVCB.sh: /skripta/ghettoVCB.conf: line 14: not found
  Recording output to ' / tmp/ghettoVCB-2011-08-23_12-00-27.log '...
  2011-08-23 12:00:27 - info: = ghettoVCB NEWSPAPER BEGIN =.

  2011-08-23 12:00:27 - info: CONFIG - CONFIGURATION GLOBAL GHETTOVCB = /skripta/ghettoVCB.conf FILE using
  2011-08-23 12:00:27 - info: CONFIG - VERSION = 2011_06_28_1
  2011-08-23 12:00:27 - info: CONFIG - GHETTOVCB_PID = 33245431
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_VOLUME = VMFS/Synology.
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-08-23_12-00-27
  2011-08-23 12:00:27 - info: CONFIG - DISK_BACKUP_FORMAT = thin
  2011-08-23 12:00:27 - info: CONFIG - ADAPTER_FORMAT = buslogic
  2011-08-23 12:00:27 - info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
  2011-08-23 12:00:27 - info: CONFIG - ENABLE_HARD_POWER_OFF = 0
  2011-08-23 12:00:27 - info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
  2011-08-23 12:00:27 - info: CONFIG - POWER_DOWN_TIMEOUT = 5
  2011-08-23 12:00:27 - info: CONFIG - SNAPSHOT_TIMEOUT = 15
  2011-08-23 12:00:27 - info: CONFIG - LOG_LEVEL = info
  2011-08-23 12:00:27 - info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-08-23_12-00-27.log
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_MEMORY = 1
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
  2011-08-23 12:00:27 - info: CONFIG - VMDK_FILES_TO_BACKUP = all
  2011-08-23 12:00:27 - info: CONFIG - EMAIL_LOG = 0
  2011-08-23 12:00:27 - info:
  The data store could not be found.

  The data store could not be found.

  The data store could not be found.

  2011-08-23 12:00:36 - info: start backup for Windows 2008 R2 coaching
  2011-08-23 12:00:36 - info: creation of snapshot "ghettoVCB-snapshot-2011-08-23" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/4d5ed225-cdb17961-51bb-d8d385ac2800/Windows 2008 R2 coaching / Windows 2008 R2 Podpora_1.vmdk" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/iSCSI/Windows 2008 R2 coaching / Windows 2008 R2 Podpora.vmdk" for Windows 2008 R2 coaching
  2011-08-23 12:03:42 - info: Instant withdrawal of Windows 2008 R2 coaching...
  2011-08-23 12:03:47 - Info: backup duration: 3.18 Minutes
  2011-08-23 12:03:47 - info: ERROR: unable to backup Windows 2008 R2 coaching because of the error in VMDK backup!

  2011-08-23 12:03:47 - info: # final status: ERROR: No. VMs saved! ######

  2011-08-23 12:03:47 - info: = ghettoVCB JOURNAL END =.

  I also do backups on iSCSI NAS storage.

  First ghetto script does not detect the data stores that are local disks where I run few servers and secondly I get error of backup server located on iSCSI for HP MSA.

  Thank you.

  Your destination data store is set incorrectly

  VM_BACKUP_VOLUME = VMFS/Synology.

  It should be

  VM_BACKUP_VOLUME = / vmfs/volumes/Synology.

• "boot configuration data store could not be opened" when starting bcdedit.

  "boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk.  Nuked 1st disk and installed Win 7.  It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive?  All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.

  Boot from the installation DVD and run Recovery menu. Command prompt.

  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Not enough space available on the disk without title

  Every time when I trie to install any creative cloud application, I get an error "not enough space available on the disk untitles-(30). There is no disc titled untitled and there is enough free space (50 GB).

  It happens on my Mac Mini and Mac Book Pro. The only similarity I can find, is that they have both a Kingston custom 60GB SSD.

  Does anyone have a solution to this problem, I already tried to change the location of installing a HARD drive.

  You're right, this isn't a problem downloading.

  It's a lack of space in / tmp (or/private/tmp). It is a silent place to stash huge to download files, but moving on... It's an easy fix.

  If you're set up with an SSD a popular board 'longevity' is the tmp in RAM or elsewhere to save some wear and tear.

  In expression, type "df - kh", if you see/private/tmp anywhere under "mounted on ' and the 'result' is not large (several concerts I assume), there is your problem.

  The most popular advice ramdisk (can not find the link right now) is to place a startup item to do this job and name "RamFS" or/System/Library/StartupItems/RamFS. Move it out or chmod 000 it temporarily, restart and install. You can replace the StartupItem subsequently (and restart).

• Error"0x8007045D there is enough space available in the drive" everything by transferring the .mkv file

  Title: Error 0x8007045D new Code

  I, m, try to copy a file .mkv of 17 GB of my hard computers driving outside hard disk, the error message display of the computer's peripheral IO error 0x8007045D? What should I do? I tried the solution required to the http://support.microsoft.com/kb/952272 account, but could not solve it? I use Windows 7 Home Basic Edition, OS, 4 GB of RAM to 64-bit. There is enough space available in the drive in which I am trying to trnsfer the .mkv file, almost more than 200 GB.

  Hello

  -Did you do changes on the computer before this problem?
   
  Step 1: I suggest to start the computer in safe mode and then try to transfer the file and check if it helps.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  If the issue is not persistent, then follow the article to find the cause of the same thing.
  
  Step 2: Clean Boot Mode
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
  Hope this information helps.

• Hard drive receiving "there is not enough space available to complete this operation" in Windows 7

  Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error   "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.

  Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.

  Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution.   I will thanxful to you.

  Kind regards

  Pranjal

  * original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.

  Hi pranjal1,

  Please see article with other useful information:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Your bootable USB key could not be created. It is not enough space available on the disk.

  I tried more than a dozen times and ended up with the same results. I bought a 10 windows and disk utility, I created an ISO. Then open Boot Camp and regardless of the USB or external driver I use Boot Camp said that the space is not enough! I used 8GB - 16 GB - 32 GB USB and not everything works. Then I used Baffalo external driver with 1 t and I still got the same message. In all attempts, I erased/formatted and made sure that the format of the USB is MS-DOS. But nothing has worked.

  Anyone know why?

  I use an iMac with screen Retina 5 K (mid-2015) with 3 t

  atooma wrote:

  Anyone know why?

  The W10 installer you have is a Setup 32-bit/64-bit mixed and has one or more files that is larger than 4 GB. It does not fit on any drive formatted as FAT.

  As 2015 Macs do not support a USB Installer. They create an internal partition called OSXRESERVED and use to install only W8.1/W10.

  Can you download an ISO only 64-bit https://www.microsoft.com/en-us/software-download/windows10ISO and test?

  Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for more details.

• Bay of Cluster data store turns into a string?

  I am very new to the vCO (or maybe I should call vRO now) and therefor also very new to script and digging through the API, so I apologize if this is a bit of a noob question.

  I'm currently running below script to find the data store cluster to a cluster host with more available space.

  However, I also want to check for the text in the name of the data store. For this I use indexOf.

  If indexOf detects all matches, it should add the DSC (or pod) in a table.

  But it seems that this operation turns my array into a string.

  Because it is a new environment I have only a DSC connected to the cluster hosts, but I still think that it should be able to be an array with a single value?

  Find the Cluster and related variables

  var hostarray = System.getModule ("com.vmware.library.vc.cluster") .getAllHostSystemsOfCluster (inCluster);

  Host = hostarray [0];

  pool = inCluster. ResourcePool;

  level of var = 'High';

  Find warehouses of data in Cluster

  var = host.datastore data warehouses;

  Find Clusters of Cluster data store

  var storagePods = new Array();

  var storagePodNames = new Array();

  for (d in data warehouses) {

  if (data [d].parent.vimType warehouses is "StoragePod") {

  if (storagePodNames.indexOf (datastores [d].parent.name) < = - 1). {

  storagePodNames.push (datastores [d].parent.name);

  storagePods.push (datastores [d] .parent);

  }

  }

  }

  System.log (' storagePods: ' + storagePods [0].) Summary.freeSpace);

  Find Clusters corresponding to the layer data store

  var podTierArray = new Array();

  for each {(var pod in storagePods)

       if (pod.name.indexOf (tier) > = 0) {

  podTierArray += pod;

  }

  }

  podTierArray becomes a string instead of table after above operation :(((

  System.log (' podTierArray: ' + podTierArray [0]);

  System .log (' podTierArray: ' + podTierArray);

  Here is the result of the above script:

  [12:24:27.307 2015-02-27] [I] storagePods: 4497773428736

  [12:24:27.308 2015-02-27] [I] podTierArray: D

  [12:24:27.310 2015-02-27] [I] podTierArray: DynamicWrapper (Instance): [VcDatastore]-[class com.vmware.vmo.plugin.vi4.model.VimDatastore] - VALUE: < datastore-386 > Datastore 'high Datastore01 '.

  
  

  I'm guessing that "D" is the first character in the string (which should be an array), which is also attested by the third row of the output when I print the entire string.

  Because this time is a string I can't use it as an object, for example "podTierArray. Summary.freeSpace' give me an error that it is a property not set.
  

  In addition, as you can see earlier when I use the variable ""storagePods "this is a picture I have run the podTierArray. "

  
  

  Why would he suddenly become a string instead of an array of objects?
  

  Hi Oskar,

  It happens because of this line in your code

  podTierArray += pod;
  

  This is not the right way to add the element in a table. You need to take it

  podTierArray.push(pod);
  

• installed a device and get an error message "(code 10) Impossible to start the device"

  Installed Pinnacle Studio 12

  Hi Bernard,.

  Please provide the exact model of your device number.

  12 code: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.

  This error can occur if two devices that are installed on your computer received the same (Input\output) of i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS (Basic Input Output System), the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  Method 1: Run the fixit available in the link below and then check if it makes a difference

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Reference

  Explanation of error codes generated by Device Manager
  http://support.Microsoft.com/kb/310123

  http://TechNet.Microsoft.com/en-us/library/cc732199 (WS.10) .aspx

• Not enough space on the data store

  I created a VM w2k8 server. I have attached a second virtual drive to it in the vsphere client determined I gave him too much space. I went back in the vshere client and click on delete. Now, when I go to add a second drive with the right amount of space I want t use I get error not enough space on the data store. I noticed that the old file vdmk still exist but do not know how to proceed. It is a 5 ESX environment and the data store is on the SAN. Space on the windows server is listed as unallocated.

  Hello and welcome to the community of VMware. Well I would like to browse the data store and make sure that there are no vmdk files sitting here that, if the other wise not to be there. Have a go at this and feedback your conclusions.

  Best wishes.

• Not enough space on the store of data error

  I just created a new virtual machine and the data store has 1 GB free, but when I try to turn on the virtual machine, I get the error ' not enough space on the data error store '.

  What is the minimum data required to power the virtual computer space? I thought that 1 GB is a lot of space...

  That is also correct long as you do not have a defined reserve, because don't forget the size of the by vm vmkernel swap file is equal to the memory assigned to the virtual machine minus the reserve memory.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Not enough space on the data store.  Newb help please.

  I have a running ESXi 4.1.0 2 Windows VMs server.  Everything worked very well, but I had to turn off all of the server and physically move.  When I powered it back, only on virtual machines with the power on at the same time.  The other dies with the error above.  I have very little experience with VMware and I'd appreciate any help.  Thank you.

  Welcome to the community - the reason why you can't turn on your VM is because a vmkernel swap file is created when you turn on the virtual machine, and if there is not enough space, then, you will receive this error - you'll need clean the directories where are installed the virtual machines - you'll need to remove all of the log files If there are snapshots commit those and then you should be able to powere on virtual machines

• provisiond data store space does not match with the space of the VMs

  Hi guys,.

  I have the particular phenomenon on my cVenter environment. Space brought into service on data warehouses does not correspond with the really used capacity of the virtual machines.

  Details:
  VCenter: VMware vCenter 6.0.0 3634793
  ESXi: ESXi 5.5.0, 3568722
  Storage: The Netapp Cluster Mode
  NFS data warehouses

  Virtual machines allocate more space such as assigned. It could be 100% more space. There are no files that are responsible for this in the data store. We have allowed efficiency of storage which means on the Netapp deduplication.
  In the opinion of vCenter - the data store has a provisiond about 1 TB space and really about 550 GB space (space of each unique virtual machine).

  You know this problem or something like that?

  Best regards

  Thanks for your replies, but it's a feature of Netapp called fractional reserve.

  This reserved feature 0% or 100% of the space.

  Has anyone experiences with the option of fractional reserve and volumes NFS for ESXi? What is the best value for this?

  Romano

• Vcenter/VSphere/ESX 5.0.0 question: could not download /opt/vmware/www/build/Tenacity.iso for the san-core8 data store. == &gt; Build fails

  I built this different ways now, and I still get this same exact error. I spin as 'Admin' and I have so any available privilege.

  There are no special characters in the password, I tried this file generation and he got away on my computer than this (v-soft bootable with interface).

  Please help me get to the next step, I'm stuck here.

  Everything seems fine until:

  09/10/2013 18:00:25 [info] validation available disk space...

  09/10/2013 18:00:25 [info] prepares the operating system installation files.

  09/10/2013 18:00:25 [info] looking for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso

  09/10/2013 18:00:25 [info] Validating md5 checksum for /opt/vmware/www/ISV/ISO/CentOS-6.4-x86_64-bin-DVD1.iso (may take a few minutes)

  09/10/2013 18:01:15 [info] verification of repositories of request for the installation of the packages packet...

  09/10/2013 18:01:16 [info] creating package repositories...

  09/10/2013 18:01:16 [info] create the virtual machine model.

  09/10/2013 18:01:17 [info] VM carrying from the Studio to the host configuration. This may take a few minutes...

  09/10/2013 18:02:20 [warn] cannot download /opt/vmware/www/build/Tenacity.1/Tenacity.1_provstart.iso for the s-core9 data store.

  09/10/2013 18:02:20 [warn]

  %3 %7% 11% 15% 19% 23% 26% 30% 34% 38% 42 failure: (22, ' the requested URL returned error: 401')

  09/10/2013 18:02:20 [error] met a unrecoverable build error!

  I am able to use this model for Centos on my computer actually install and build a paralytic with centos on that - unfortunately I do a

  hacks to make it work properly and I cannot get it to install other real applications (perhaps there is a new version for workstation 10?)

  So I went to vsphere, and I KNOW my generation model is ok, at least to get the installed operating system.

  What information can I give you or what can I try, thanks!

  Is it really "sort of" loading ie 42% or which is a total failure?

  OK, I have a build that WORKED, now I see what you mean about watching build/deploy the VM guest.

  Here is the solution to my problem: our vcenter uses names with spaces, we also use the domain names for our connections. In addition, each admin password was 'special characters', that I've debugged meticulously by ALL of them and much more. Basically, it did not matter that I have "URL" code things, used new tools or edited different scripts to encode things one way or another.

  What finally gave us successes was to go to a 'clean' Vcenter implementation that

  (a) use/did not require a domain name (not / credentials)

  (b) all had the "BACK original' legal names, IE no spaces, no special characters, etc..

  (c) the passwords contained NO "special characters".

  (because I changed this way, 'URL' encoding didn't work, tried it)

  Moral of the story: building a new, simply configured Vcenter or get one and use it.

  (Note: I even downloaded a new ovftool and tried every way that I could but it did not success)