NOT FOUND HELP TOPIC

Similar Questions

• Windows Vista Help & support file error msg: "not found help topic this content under construction.

  Windows Vista when I open the help file & support I get this error msg in the body of the glass:... "Help topic not found. This content under construction. We were able to retrieve the requested topic. "Please tell me how to get help & content & data support or fix this problem debilitating w/vista.  Thank you

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you cannot open help and Support on the computer.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. have there been recent changes to the computer before the show?

   

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

   

  Method 1: Difficulty of Windows Desktop Search when it hangs or no display of results.

  http://support.Microsoft.com/mats/windows_search

  Method 2: Try toscanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 3: I can not open the help that was created in Windows Help format (WinHlp32.exe)

   http://support.Microsoft.com/kb/917607

   

  WARNING:
  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

  Please follow these recommended steps and post if you still experience the problem.

• cannot update or uninstall iTunes because "iTunes.msi" not found - HELP Please

  November 8, 2011 - on window XP

  "iTunes.msi" - not found - and therefore prevents the update AND uninstall iTunes!

  iTunes.msi is setup.  Normally, it is missing because you didn't upload.

  However, in the rest of the error message you forgot, the problem probably turns out to be that you have downloaded a new version of iTunes and it will not be installed because it's hard to uninstall the previous version.

  It's always a good idea to post the full error message without paraphrase.  It also helps others help if you describe the circumstances surrounding the error.

  Assuming that my crystal ball reveals precisely your problem, the solution is the following:

  This message occurs when the registry key pointing to iTunes uninstaller is corrupted (or uninstall of iTunes has been moved or deleted).  The simplest thing to do is just clean things, and then try again.

  Used to have a tool just to do this, called the Windows Installer Microsoft Cleanup utility.  Apparently, however, when this tool has been used (I think with MS Office), removes sometimes more he was supposed to, and that's why Microsoft has removed the tool of its download servers.

  The Windows Installer Cleanup utility is always available from http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html , or you can use the free Revo Uninstaller.  Before using or the other of these tools, create a restore point from the system, backup the registry with C:\WINDOWS\ERUNT, or (if you can afford) creates a full disk image or a clone - just in case.

  Here are the usual directions to perform a "clean installation" of iTunes, based on Support of Apple HT1926 article.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  [See note above regarding cleanup utility]
  Download & install the Windows Installer Cleanup utility:
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• Wanted M6 Windows 8: Windows 8 HP Boot Device not found Help!

  Help me my TI shows on my screen of Boot Device not found HDD (3FO)
  Please install an operating system on your hard drive
  F2 System Confugaration
  My Bios Version is 1.6.0.0
  I use a laptop
  When I click on f2 it shows on my screen
  The background is completely black and
  He said test test memory hard drive only
  Memory is passed
  Drive hard but not installed
  Long DST not installed
  Please help me I want to buy another computer!

  Adequate replacements:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=8158167&CSID=_61

  A little faster 7200 RPM. 5 years warranty vs 2 years for the hard disk which above:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=9585218&CATID=1277

• DGMGRL object NOT FOUND-HELP

  Hello Experts-

  I have a scenario where I would turn off transport Journal of primary school on physical media by & turn it back as part of PLANNED maintenance.

  I am facing the following error and I was wondering if you guys can help out me:

  DGMGRL> connect /
  Connected.
  DGMGRL> show database verbose DBNAME
  Object "DBNAME" was not found
  DGMGRL> show configuration verbose;
  
  
  Configuration - DBNAME
  
  
    Protection Mode: MaxPerformance
    Databases:
      DBNAME  - Primary database
      DBNAME1 - Physical standby database
  
  
    Properties:
      FastStartFailoverThreshold      = '30'
      OperationTimeout                = '30'
      FastStartFailoverLagLimit       = '30'
      CommunicationTimeout            = '180'
      FastStartFailoverAutoReinstate  = 'TRUE'
      FastStartFailoverPmyShutdown    = 'TRUE'
      BystandersFollowRoleChange      = 'ALL'
  
  
  Fast-Start Failover: DISABLED
  
  
  Configuration Status:
  SUCCESS
  
  
  
  
  
  
  
  
  
  
  
  

  I'm confused as why the object is not found when you use the database show but configuration command can display it as a present?

  Hello;

  Try like this:

  SEE THE DATABASE 'DATABASE_NAME' VERBOSE;

  Best regards

  mseberg

• My Adobe account indicates that "subscription not found" [help REQUIRED]

  Nice day! I already have an account in adobe photoshop and I want to buy the software again, but then when I signed up, it says «not found» subscription Please let me know what will be the remedy for this problem. Thank you!

  You probably have the same e-mail address?  I think you're going to need help from a member of Adobe staff, so I'll change your subject line to get one for the thread.

• Error message saying "c:\windows\system32\fadcaxoi.dll specific module not found" help?

  Whenever I start my pc (Windows XP Home Edition, ed), this message pops up. If I click on it goes and everything seems to work ok but obv there is a problem.

  I tried to restore windows disk problem persists

  Thanks in advance for any help

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• I still have not found "help" to tell me how to remove all the lines and columns beyond those needed for my spreadsheet.

  I used several worksheets.  More allows me to specify the rows/columns and then delete them.  This is to remove all the lines/columns beyond those set up and formatted for my spreadsheet.   I tried many ways to remove all additional lines/columns, but without success.  I even took the time to scroll down/on to highlight all the unnecessary lines and columns, but they do not remove it.
  Any suggestions?  I used spreadsheets most allow me to specify the number of rows/columns for my worksheet

  You can ask your question in the office | Excel Forum because it is not really a problem of Windows XP performance and maintenance.

  Office | Excel

  http://answers.Microsoft.com/en-us/Office/Forum/Excel

  Also, providing specific information may help to get a faster response or better, such as the version of Office or Excel? version of Windows XP? Home, Pro, 32-bit or 64-bit.

  I hope this helps.

• Not found help from Lightroom 6

  Just bought LR6 one upgrade of the LR5 and installed (Windows x 64). When I choose "Lightroom Help" in the Help menu, it tries to open the web page

  http://community.stage.Corp.Adobe.com/chcservices/services/redirect?u=http://help.stage.ad obe.com & p = Lightroom_6.0 & l = en_U...

  and I get an error indicating that the page cannot be found. IE11 says "cannot display the page", said Firefox "Firefox can't find the server at community.stage.corp.adobe.com.

  Hi all

  Thank you for reporting the issue.

  We are able to reproduce the same on our end. Please give us some time to get that rectified.

  Until then, you can go to Adobe Photoshop Lightroom CC help | Lightroom help

  Thank you for your patience and cooperation.

  Concerning

  Arpit Kapoor

• OS: windows vista Home premium. Cannot find help topics

  When I go to the start menu to help and support, he gives the msg.
  not found help topic
  section under construction

  pls help: msxml3 command prompt 1 thing msxml6 has been tried, it doesn't work.
  pls help...

  Hi Adi181089,

  Thanks for posting your question.

  I suggest you try to launch a Scan SFC:
  1. click on the start menu, choose all programs, then Accessories, and then right-click on the item to the command prompt and select run as administrator.
  2. click on continue to allow to open a prompt with administrative privileges.
  3. run this command in the cmd prompt: sfc/scannow
  4. the cmd prompt should list text stating "start system analysis. This process will take time. »
  5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions
  6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct
  7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct the errors.
  8. after fixing errors that are found, check if this solves the problem.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to remove the program from the toolbar of Verizon Broadband, he said "the toolbar DLL is not found."

  When I try to remove the program from the toolbar of Verizon Broadband it is said "the toolbar DLL not found, help

  We are not in a position to help unless you help by providing us with as much information as possible.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• "Receive the error message" operating system not found '.

  Original title: studio dell 1555

  account held a computer dell laptop but not initialize password is protected F2 and F12 works. screen says operating system not found help

  Hi Gary,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you have problems with the computer not start.

  This problem can occur because of a hardware problem.

  Proceed as from the link below and check if that helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  Warning: Be careful when you change the settings of the BIOS (Basic Input Output System). The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Meet us if you face problems with computer not start or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Receive error message: "help topic is not found. This content under construction. We were able to retrieve the requested topic. »

  original title: Windows Help and Support link no longer works.

  Very recently, in trying to use the help and Support Windows a blank page appears with the following error message:

  Help topic "not found".

  This content under construction

  We were able to retrieve the requested topic. »

  The same problem also happens with IE8 help and Support.

  Hello TodAce,

  Please see the link below on the Microsoft TechNet Forums.  There is another user posted the same error message.  Please let us know status.

  Help and Support - screen text formatted correctly hyperlinks / missing

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/b3a7ddd0-59D3-4386-ab70-3f48424447b6

• How can I get the help topics in windows on windows vista, when I click Help on any page web I always get the message of help topic not found this page under construction

  I BOUGHT A SECOND HAND TOWER WITH WINDOWS VISTA HOME PREMIUM PREINSTALLED, THE PROBLEM I HAVE WITH EACH WEB PAGE OR PROGRAM, WHEN I CLICK ON HELP ON THE TOP OF A PAGE, I GET THE WINDOWS HELP AND SUPPORT WINDOW POP UP. WHEN I TYPE IN A HELP TOPIC AND CLICK SEARCH, I ALWAYS GET A MESSAGE TELLING ME RESEARCH TOPIC NOT FOUND AND BELOW WHAT HE ALWAYS SAYS THIS PAGE IS UNDER CONSTRUCTION, IT DOESN'T MATTER WHAT HELP TOPIC I PAT ON THE SEARCH BOX, I STILL HAVE THE SAME MESSAGES

  SOMEONE CAN ME ADVISE ON THIS POINT.

  I WOULD REALLY APPRECIATE ANY HELP.

  JOHN ROBERTSON VS

  Hi JohnRobertsonVS,

  Method 1

  Refer to the Microsoft article to download and install Windows Help program (WinHlp32.exe), check to see if it helps.

  I can not open Help files that require the Windows Help program (WinHlp32.exe)

  http://support.Microsoft.com/kb/917607

  Method 2

  Try the method below and see if it helps.

  a. Open a command prompt window and run the following command:

  regsvr32 msxml3.dll

  b. Press ENTER.

  Note: To open a command prompt window, click Start, click programs, accessories principally made, right click Guest and then click run as administrator.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that would be a corrupt system file search.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• HP Health Check - topic not found

  I have a Pavilion dv7-1105tx. The HP Health Check asked me to run himself, as he usually does, this morning but at the end he identified a problem of maintenance of high priority that should be addressed (balance of health provision).  Unfortunately, this only did me not the possibility of repairing, it gave me the option re-scan where to seek help.  By selecting the help button it took me to Windows Help and Support where I was advised "topic not found".  My question here is where?

  Any help would be appreciated.

  PS I am running windows vista 32-bit if it helps.

  Hello

  Health check asks to update but does not click on repair?

  Looks like you need to update these two files - try these manually and then run again the health scan and see if the problem goes away. Note, you can see a few new items listed with the new library - what is normal.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69381-1&LC=en&DLC=en&cc=us&lang=en&OS=2093&product=3744254

  Thank you!