Not getting not created partitions...

Similar Questions

• Qosmio G35-AV600: using Recovery CD I get partition not created error

  I recently ordered a recovery for my Qosmio G35-AV600 disc, because I started in safe mode to clear an alleged threat. Silly me! I forgot the password because I constantly use the fingerprint reader. Well, at the time where, that drives recovery came, I had remembered a password and access I.

  The thing is I always want to format the laptop, but I get partition not created not errors. Is it because the laptop hard drive has SATA or RAID capabilities, or because of the so-called Qosmio player. * If I could format the hard drive, I would not be able to use the laptop Qosmio mode? *

  I searched here and even contacted the customer service and have not found a definitive answer. Customer support's solution was to send to an authorized repair shop. My experience with computer repair shops, is that if the problem is not hardware related, they simply reformat the disks. I could do it myself if I could get help with this "partition has not created" or the partition not deleted"errors.

  Hello

  I agree with you and I also think that this has nothing to do with the hardware failure.
  But who knows, if you started the operating system in safe mode then we shouldn't exclude the hardware problem (IE. HARD DRIVE).

  However, the restore CD contains already all the drivers and you n t need to install SATA or RAID drivers.

  In my opinion, there are bad RAID settings in the BIOS!
  Please check the settings in the BIOS on the third page.

  If you know n t that mean simple settings, you open the user manual and check RAID chapter in the user manual.

  In addition, this could be useful:
  http://support.toshiba-tro.de/KB0/TSB6901K60006R01.htm

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

  System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

  Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

  appears in the new installation of Windows 8.0.

  Installation of MS Windows 8 DVD detects the hard drive OK.

  Software mini of Partition of the tool (3rd part) detects the hard drive OK.

  Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

  Here are the steps that I tried to solve the problem, but it won't work.

  1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

  2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

  3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

  4 MiniTool Partition software used to clean HD and partition... always get the same error message.

  5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

  Background

  I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

  After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

  There is no SIM card in the laptop.

  Help, please...

  I managed to do work Ok. Use Windows 8 DVD to run Diskpart

  1 delete the partition.

  2. restart the system.

  3. allow Windows 8 DVD to perform the partition and format the HD.

• Setup could not create a new partition system

  Ok.  I just built a new rig.  ASUS P55 intel chipset mobo.  I have two WD Caviar Black hard drives and a RAID-1 array.

  I installed my OEM WIN-7-64 operating system several times.  Mostly because my WUSB54GC Linksys adapter wireless crashes my OS WIN because of a compatibility problem.

  Long story short: the last time my OS crashed he would not be stopped, kept grinding and grinding so I stopped it "hard."  Then when I tried to restart it kept a black window stall without launching.  So I decided to start over with a clean install.

  Big mistake!

  When I got to the place where you want to install? I had onlyl only one possibility, I created a RAID-1 array with 1 TB WD caviar drives two of the screen.  Then, I started to FORMAT it the disc for the drive I want to install WIN 7-64 on.  That was the big mistake.  Previously, I was able to install WIN 7 several times, but after formatting the HARD drive, I received the message "Setup could not create a new partition system.  I can't find the logs and I tried all of the suggestions that I have found here and does not.

  I have an ASUS P55-Deluxe mobo with two 1 to WD Caviar black HDs in a matrix RAID-1.

  I tried to reinstall WIN 7, with the HDD BIOS on IDE.  It worked once in what concerns the installation of the OS, but whenever I try to recreate the RAID array, I get the bloody message "Setup could not create a new partition system!

  I tried using partition of drive on BACK in but nothing works.

  Of course, here, someone has the same problem and has a solution.

  Help, please!

  Hi Steve,.

  On another forum, I read to remove the battery from the motherboard and wait 10 minutes before turning.  Not only did it clears the CMOS memory, but "remains".  After that, I was able to partition my RAID-1 disk, format the partition, load my drivers and install WIN 7.

  Thanks for the quick response!

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not create a new partition or locate an existing journal of one.see configuration file

  Separated from this thread.

  I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

  Salvation of demonstration,

  We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information is useful.

  Thank you.

• Utility disk in El Capitan will not create a partition on an SDXC card

  Hi, I want to create two partitions on a map of Micro SDXC 64 GB. However, when you run the disk utility in El Capitan, the "score" button is grayed out out and not clickable.

  Anyone know why this is happening? Or know a work-around? The card is for Raspberry Pi my son, who needs a 'boot' partition and partition "recovery" (in FAT format). I deleted the map using disk utility, but the "score" button remains unavailable.

  Thank you for all the helpful tips.

  OS X El Capitan 10.11.3 running on a MacBook Pro (17-inch 2. 4 GHZ, mid-2007).

  

  Click on the root of the device, not the partition that you do in the screenshot.

• Satellite A100-906: Express Media Player does not create the c partition

  I recently bought the Satellite A100-906 model and I would like to make a partition to save the data, but the already existing partition with the reader of the Express does not allow part C: partitioning.

  If I delete the partition Express I'll be able to install it after I divide the part C: or I have to choose between separation and the Media Player?

  In my opinion it should work, but you must create the Express Media Player partition with the same size as the old.

  PS: Do you know the Partitions Magic 8? This software allows you to create partitions while Windows is running. It's a great tool

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• did not create host login password: computer application password. Impossible to get on computer

  new computer windows 7 Home premium, used only a few times in a couple if weeks. has not created a password for the connection of the home screen.

  homescreen requires now despite not having a password. Failed to get on the computer.

  have tried different passwords that I use elsewhere as e-mail etc. ; tried to use my name to logon as password; tried to connect without any password and just pressing eter (as I have done before) but does not. Please help, very anxious

  Hey Ezzy-1801.

  The default password is "admin".
  Try so I see that you said that you have already tried a few, but it's worth a shot.
  Otherwise, because we will not bypass password, you have the installation disc with your PC?
  You said you only used a few times, if you insert the installation disc and repair windows file, the same as re - install, you'll be at square one but no lock.
  I hope it was useful, in addition, you can create a password reset disk, the instructions are below, if you do not run this question once again :)
  http://support.Microsoft.com/kb/189126
  I hope that was helpful. Thanks for posting of Microsoft Answers!

• Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

  Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

  "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

  (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

  What I'm doing wrong here?

  The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

  Thanks in advance for any ideas.

  After you disable the internal SD card slot, the installation ends without incident.

• I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

  * Original title: installation of windows 7

  I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output

  Try to reinstall.

• Setup could not create a new partition or system to locate a system partition.

  Today, I decided to re - install windows 7 to make it was once again, after saving all necessary files on my edge 1 TB hard drive restartrd windows with the retail CD in the CD drive. I pressed F12 and chose to start with the CD rom, now after several minutes while the CD was put into service, I informed all language settings, keyboard and time and press Next. Then clicked install now.
  ...
  ...
  About 10 minutes later, the next set of options showed, Normal install and custom install. I clicked customized. I then progressed to formate the hard drive and then click to select and then pressed...
  He been said now, "Setup could not create a new partition system or locate an existing partition in the system. So I tried to fix this by removing the primary hard drive and the other disappeared two (excluding the 1 to one). So I then clicked new on this 150G hard drive and then clicked on, it now says the main hard drive. I then clicked Next. ..
  The same thing, "wa unable to create a new partition system or locate an existing partition of the installation system. now I'm stressed and I really want to fix this today, so I came to the internet.

  Please can someone help me?
  -Sent from my iPhone.

  Disconnect the SATA cables to all your drives except the drive hard that you plan to install Windows on and the DVD player. Also unplug all devices except for the keyboard and mouse enternal.

  Then, enter the BIOS and configure the DVD drive as the first boot device.

  Now try the reinstall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My new computer came with a partitioned hard drive. I have not create the partition. What is it?

  original title: Partition of mystery

  I just got a new computer. It has a 2 TB hard drive that apparently has already been partitioned, creating a drive E. I have not create the partition. The files on the partition are old EULA, the .cabs, and .dll files, but this that baffles me, is that the two disks are the same size, 2 TB. It is the size of the disk itself. Whence comes this extra drive, and how these two readers may overlap?

  Should I remove this extra drive and if so, how can I do?

  Thank you

  Tim

  Wait, I'm CONFUSED! YOU can not HAVE a PC THAT IS 4TB SIZE!

  
  
  EDIT: Sorry, but Acer installed 2 HDD. (Wow!)
  
  
  Be sure not to remove the 2nd partition, because it IS a recovery or backup disk.