Not possible to install InstallShield error 1628

Similar Questions

• I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  I tried to upgrade my Mac Lightroom 2015 version 6.0 to version 6.3, but it is not possible. "Code of error: U44M2P28.

  Hi [email protected],

  Please uninstall Lightroom using Adobe cleaning tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Then download and install the updates from Lightroom 6 from the following link: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• It is not possible to install Adobe Flash player 11.1

  It is not possible to install Adobe Flash player in the browser, it works without problem?

  There are 2 versions of Adobe Flash:

  • an ActiveX version for IE only
  • a plug-in version for most of the other browsers including Firefox
  • On a Windows system, you must always update both individually.

  You have the Plugin version 9.0.45 installed Firefox - a very old version. In modules > Plugins you should see "Shockwave Flash (version)".

  Make sure that your Plugins often-> http://www.mozilla.org/en-US/plugincheck/

  • We know only the Plugins the more popular/used by this page
  • page detects only installed, activated Plugins

  Install or update Adobe Flash

  1. With Firefox, click on the following link and SAVE the download on your desktop, so you can find it later. Clear all of the items on this page that you do not want to download (i.e., "McAfee Security Scan Plus"):
     • http://get.Adobe.com/flashplayer
  2. When the download is complete, close Firefox (file > button OR exit Firefox > exit)
  3. Click or double-click the file that you just saved on your desktop
     • In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
     • The button 'Install' in the lower right corner is now highlighted, click it.
     • Installation is quick.
  4. Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
  5. To the update/install the ActiveX for IE onlyversion, repeat the process, but use IE to go to the site above.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Satellite M70-151 - not possible to install new HDD

  Hello

  I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

  Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
  Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

  BIOS recognizes the correct drives.

  If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

  The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

  The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

  * My questions are: *.

  Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
  What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

  It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

  André

  Hello Andrew

  This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
  On two drives, I have installed WXP using the Toshiba recovery image.

  I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
  HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
  What you can try is to set the BIOS to the default settings and try again.

  The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

• Updates will not download and install - NO ERROR CODE - updates remain at 0%

  For Adobe Support.

  I get the popup "update" whenever I connect to my computer and it gives me an error message but no code error. The update starts at 0% and stays there indefinitely.

  It's VERY frustrating because on top of working 10 hours today, I have now lost another hour, trying in vain to find a solution.

  By quitting their stand alone suite (CS5, 6 etc) and later support for it, Adobe has FORCED me to use their Cloud Creative suite subscription. While I HATE not being able to buy a standalone program, I like the CC Suite and I'm PAYING for this subscription that provides the latest updates. Now, all of a sudden the updates will not download and install and Adobe wants me to follow a set RIDICULOUSLY long and complicated steps to solve the problem? It's a complete and absolute nonsense!

  I am a self-controlled, respectable and intelligent individual, but it makes me want to use profanity! I HAVE NO TIME FOR THIS NONSENSE.

  According to the latest information (see: Adobe : Cloud accelerates since 3.4 million paid creative members |) ProDesignTools) there is over 3.4 million people like me PAY for reliable use!

  Frankly, I'm so frustrated that I am very close to spearhead a national campaign to educate these users 3.4 million on the negligence of Adobe supported because it's visitors!

  WE SHOULD NOT HAVE TO SOLVE THE PROBLEM! ADOBE NEEDS TO SOLVE THE PROBLEM! When you get this figured out, I'll certainly appreciate an e-mail from your. In the meantime. Be aware that each passing day, and whenever I see this pop up, it serves as a reminder that Adobe does not respect what they promised!

  Kind regards

  Brian Heckman

  EMAIL: [email protected]

  Hello

  If it you please restart your computer and then try to install updates again.

  If this does not work, follow the steps mentioned in this doc. KB troubleshoot Adobe Creative Cloud download and installation of the questions for help.

  Kind regards

  Nicos

• Message error when you install a game 'Assistant instalation "_" a support of instalation file not would be installed data error (cyclic redundancy check)

  It's the exact message

  "A support of instalation file cannot be installed
  Data error (cyclic redundancy check)

  This simply means that your CD/DVD media for the installation of your game is corrupted or cannot be read, extract for all the cracks, scratches on your support.

  If it is in perfect condition, better clean the lens of your CD/DVD-Rom drive with a cleaning kit, as the lens of the drive could have been contaminated by dirt.

• TC 7.3.1 not possible to install on endpoints

  Hello

  We ran into Bug CSCur63326 presentation question on / off with TC and MCU codec.

  According to the Bug, the problem came in TC7.2.1 and must be fixed in TC 7.3.1 which is downloadable since Tuesday.

  So, I downloaded the SW for a variety of endpoints that we have.

  Unfortunately, it is not possible to upgrade to this version, any version prior to, or what type.

  Once the SW is downloaded and the installation starts, it does not directly after:

  'Check the signature on the firmware image' begins. According to the "installimage.log" of the codec it says failure of the verification of signatures! »

  When I tried the same thing with my EX90, connected on the public internet behind a DSL router, verifying signature takes forever, but the update is successful.

  Someone at - it an idea?

  Best regards, hans

  Hi, check again you get the download software appropriate for your codecs. Even if they all run TC software, there are different flavors, so be sure that corresponds to the ID software (such as s52000).

• Not possible to install Win98 SE with recovery CD

  I tried to reinstall Win98 SE with the supplied restore CD. After turning on the laptop while pressing 'C', the following error message appeared message

  Invalid drive specification
  Path not found - C:\TOOLS\TOSCDROM. SYS

  I copied the TOSCDROM file. SYS in the TOOLS directory, but it did not help. It is perhaps interesting to know, that I installed a WIN 2000 update after installation of WIN98.

  Hello

  It is possible that you need to install the CD-ROM driver before you start the procedure of recovery since the Toshiba CD.
  I put t you know the unit, but please check the page of the Toshiba driver for drivers for Win98.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Satellite A60: Not possible to install hotkeys & power saver - code: 0x7E

  I have a Satellite a60 laptop
  I installed windows xp home sp2.
  I downloaded the drivers from the toshiba site and I met problems with three of the programs.
  one is the 'Hotkey utility"which does not work and the only (when run in the CMD window)"program too big to fit in memory"message and does nothing.

  the second is with the hotkeys "display" utility which after installed said that "driver is not found.

  the third it 'energy savings' which, when installed alone gives an error: "a fatal error has occurred. "This program will be terminated code: 0x7E.

  What should I do to solve these problems? Help, please
  Thank you
  Ohad

  Hello

  Why do you not use the Toshiba Recovery CD?
  On this CD, all of the programs, tools, and drivers of Toshiba are preinstalled and should work without any problems. The installation is very easy.

• The Installation of the creative cloud on my laptop as second computer is not possible.  I get error 1?

  Installation on my iMac (cloud of creative office and Lightroom) was without any possible problems. Second installation on my MacBook Air failld with 1 error. whole idea was wenn wring?

  Rantognini please use the steps in the "Failed to install" error request Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to reinstall the creative Cloud Desktop application.

• Not possible to install XP on Satellite P200 PSPB3E

  Hello

  I have a PSPB3E satellite; my friend and I tried to install Win XP on this laptop.
  W have all of the drivers, on the site of toshiba, (also the SATA driver diskette), but it seems impossible to install XP.

  We need XP for medical application (ultrasound). Uptill now, we tried: vista House downgrade to xp--> without success.
  HARD drive total format; boot from the XP cd--> without success.

  All the partitions have been deleted. We do not know what do us wrong. Al 1 last time XP installed OK but after he was scheduled to return: he had a blue screen for a second and you can only start up in save mode... and even that does not work.

  Does anyone know what do us wrong, or someone has a solution for us?
  Maybe the only way is to build in a new clean HARD drive?

  Hello

  I m not 100% sure what harm s but I assume that the bad Intel Matrix Storage Manger has been installed.
  Please visit the page of the Toshiba driver and download the Intel Storage Manager.

  Do you use the Win XP OS, which includes SP2?
  You must use a MS XP CD with SP2! It is very important

  Friend here is my advice; I think you need to create a new XP CD using a freeware program called nLite (try Google for this program).
  Then you could include SP2 and the (driver sata) Intel Storage Manager using the nLite to the XP operating system.

  Finally, you should boot from the XP CD created new and should use it to reinstall XP on the P200 ;)

  Good luck

• Not possible to install the driver for netbook with a screen resolution 1024 x 576

  Hi I have a wireless all-in-one printer 6180.

  I tried to install the driver, so I can print from my new HP compaq mini 110 c netbook, but when the driver installation is running it stops with the error that the resolution of the computer screen is less than the required minimum. the computer has 1024 x 576 and the recommended minimum 800 x 600. Any help will be very appreciated!

  Netbooker wrote:

  Hi I have a wireless all-in-one printer 6180.

  I tried to install the driver, so I can print from my new HP compaq mini 110 c netbook, but when the driver installation is running it stops with the error that the resolution of the computer screen is less than the required minimum. the computer has 1024 x 576 and the recommended minimum 800 x 600. Any help will be very appreciated!

  The procedure described in this page may solve your problem.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Muse lost and not possible to install again

  Hello

  After installing creative Cload on my laptop, I also installed Creatiev Cloud Muse cc, but I can't find this program on my compueter and I can't install it again. When I opened the window of creating Cload on mu computer, Lightroom and Muse CC 5 are on top with a green check mark. But I can't find Muse CC on my computer. Also the Aegina Church does not have this program.

  Hope someone can help me.

  FransvG

  Hi FransvG,

  Please follow the steps mentioned in the kb: Muse http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html and try to install again.

  Kind regards

  Romit Sinha

• It is not possible to install the AP9 trial for mac?

  Hello

  I tried to install the demo of Premiere Elements on my Mac, but having errors at the beginning of the installation.

  I tried to solve the problem by setting permissions. I also restarted my Mac and log in press shift to prevent all the apps to start on login.

  The last thing I tried was copying data with the installation within the DMG files that I discovered that the DMG taken apart as soon as the copy should start. Unfortunately, nothing helps.

  In the links below, you will find some screenshots I made the error and warning messages that appear. They appear as soon as I went through all steps of the installer and the installation should begin.

  All ideas/advice?

  http://DL.dropbox.com/u/24219/errors1.jpg
  http://DL.dropbox.com/u/24219/errors2.jpg
  http://DL.dropbox.com/u/24219/errors3.jpg
  http://DL.dropbox.com/u/24219/errors4.jpg
  
  

  I hope so because I want to try AP9...

  Thank you!

  Bruce

  Hello

  Title bar of your error message indicates that you are installing content and no Core Application. Earlier, there was problem with the download link when the user tries to download Core Application then content is downloaded, but this issue has been resolved now. Please download again and then try to install the kernel first Application and let us know if issue still exist.

  Thank you

  Gerard