Not start update will install

Similar Questions

• No windows update will install on my computer.

  No windows update will install on my computer. Tried to remove and disable the Antivirus software, but I can not install any of them. When I downloaded and tried to install Service Pack 2 it returned this error "E_UNEXPECTED 0x8000ffff".

  Any thoughts?

  Hi Aaron,

  There are several resolutions by Microsoft engineers, described in detail in another thread on this forum: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ecab6071-9b1a-465b-a451-06cd1c24a671.  One of these recommendations should solve your problem.

  Barbara

• 25 Firefox will not be updated, or install fresh.

  Firefox downloads the update, "installed", and after that it says that I need to restart firefox. I have restart firefox, but it is said that the partial update is not applied and will download the complete file to be updated. After that, it restarts and he said he had problems to perform the update.

  When I try to perform a new installation, it is said to extract and then the program disappears and does nothing.

  Help, please.

  I tried to install as administrator and everything went well. Sorry for the inconvenience.

• Problem with the HP Media Center M7670. UK - a - does not start after you install an update to Apple Quicktime

  I just installed the latest update to Apple Quicktime (once an update message appears on the screen). When asked if I wanted to re - start the PC now, I clicked on Yes.

  Now the computer does not start. The power led lights up, then the hard drive light blinks for a while, then nothing happens and the PC begins to beep. The beeps are repeated, with 2 short beeps and one long beep. What do the beeps mean?

  Then a CMOS clear would be the next logical step in troubleshooting.

  Here is a link to your motherboard page.

  Clearing CMOS information at the bottom of the document.

  It is usually the last step before giving up on a motherboard.

  The problem you are experiencing is hardware motherboard related firmware.

• Windows Update will download but not install. However, stand-alone updates will install fine.

  Download updates very well, but after that, they fail to install immediately. It seems to go so fast that he does not even try to install downloaded updates. I did everyting for repair/upgrade to update / save the components associated with the windows updates and microsoft Setup. I also deleted the cache update and downloaded fresh copies of the updates, but still no instlal. I even did a repair install on xp at a given time. The machine had a malware infection, but I healed part, including purging the master boot record and wiping the boot sector. I am really puzzled at that time and any direction would be greatly appreciated.

  Thank you

  Brian

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

  Updates are not installed successfully from Windows Update, Microsoft Update, or by using automatic updates after you perform a new Windows XP installation or you repair a Windows XP installation
  http://support.Microsoft.com/kb/943144

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  0 80096001 x 80096005 x 0 0 x 80096010 0x800B0001 0x800B0003 0x800B0004 0x800B0109 0x8007f0da 0x8007f01e

  You cannot install updates that you download from the Windows Update Web site on a Windows XP-based computer
  http://support.Microsoft.com/kb/934648/

• Windows Installer is GONE. Please help me. My computer (windows Vista) will not be updated or install anything. I looked at microsoft, and there are no drivers that are obvious to me.

  I think I did too many updates at the same time and it has messed up my Installer.  I ran 3 virus different scans so I'm sure that this is not a virus.  Looking for drivers from microsoft and nothing.  I'm really frusterated with this one.  If you need information, just send me an email to * address email is removed from the privacy *.

  Hi webchikk61,

  ·         Did you do changes on the computer before the show?

  ·         (Numbers KB) updates you install?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  For reference:

  You cannot install some programs or updates

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

• Windows Vista Basic, 32 bit, does not start up-will start in safe mode

  My computer fails to start. This problem came about 2 weeks ago when I rebooted after an update for McAfee Total protection requiring a reboot. But I don't know if that is why the computer not boot not correctly.
  After a lot of testing to the Startup Repair and shut down the pc and start it again, it starts to open a session for users. But after that I restarted again in this State, the problem persists.
  There is no error codes or messages, it just does not start. There is no virus infection (I hope). While the pc is booting, I also connected to Admin and checked if there were any problems found. But no other problem than a problem with Teredo Tunneling Pseudo - Interface. I solved this problem.
  So after all these checks, I restarted again, and it will not start again.
  It starts in Mode safe with no problems, and I have restored the pc a couple of times, but no use.

  Y at - it a fix for this?
  Any help will be very appreciated!

  Thank you

  Hello RubeenaY.

  After looking on this thread. the most remarkable thing I've seen, is that we are able to boot mode safe without problem. Typically, this means that we cannot start because a driver, service, or application takes over at startup which prevents our normal operation.

  I recommend you to perform a clean boot, as they did in the previous post.

  More information on Boots own is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know how it works.

  Best regards

  Matthew_Ha

• A security update (KB2481109) is unable to install error Code: 0x8007F0F4. How can I fix so that the update will install?

  I have Windows XP, home edition, Version 2002, Service Pack 3 and if it helps any microsoft/system32. The security update (KB2481109) still fails to install with error Code: 0x8007F0F4. Unfortunately, I'm having a hard time finding a way to solve this problem, so the update will be installed. What can I do to fix this?

  Take a look at this. It may be relevant to your prºblem.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/958051>

  UTC/GMT is 10:50 Wednesday, November 16, 2011

• Windows Vista is not starting right after installing the game on Steam

  I had problems with my computer... I recently got a game on Steam, my computer asked me to allow a program. When I welcomed this program it restarted my computer. Now I can't open files or anything either, but Google Chrome works, steam is running. I'm puzzled about what is going on. I don't know if it's a virus or something much worse. Since I welcomed this program I have not been able to start my computer correctly, I have done analyses and a recovery disk to start problems.

  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailure

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:6

  
  Prob GIS 04:786444

  Prob Sig 05: Corruptvolume

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08:2

  Prob Sig 09: WrpRepair

  Prob GIS 10:87

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: D

  If any of you have any solution please reply or send me an email. Thank you very much.
  -Brian Evnas

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Why the cd dvd burner motor does not start but will start to manual

  I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

  Hello

  1. it worked earlier? If so, remember you have changed your computer?

  2. what happens when you insert a CD or a DVD?

  Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

  Note: click the fixit to activate autorun.

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

• Satellite P100 - 194 PSPA6E does not start and will not let me install Windows

  Hello

  I have a problem with my Satellite phone, witch, I got from my brother. I don't know what he did with it, but he does not know.

  When I start the PXE - E61 "Media test failure, check cable" appears. In the BIOS I put in the directory Boot LAN mode on the last position, but despite this failure E61 appears.

  I tried to reinstall Windows XP. The laptop started from the CD and the blue screen appeared and loaded XP drivers needed. But at the end of it, when you enter normally on the menu to choose where to install windows, the screen is black and in the upper left corner a small beam blinked on and outside and nothing happens plus.
  The same thing happens when I leave the laptop HARD drive and start again from the XP installation CD but this time without the HARD disc logically.
  So I thought that the HARD drive is broken and I put it in my desktop PC to test. I installed XP on the drive HARD Satellite in my PC, which worked without problems in my PC. So, I come to the conclusion that the HARD drive is not broken.
  And my BIOS Satellite detects my HARD drive and displays the name of it.

  But what is the problem with the laptop when it is not the HARD drive and BIOS show the good name of the HARD drive? Can someone help me please?

  Hello

  The story is very strange boyfriend generally that the PXE error if the laptop tries to boot from LAN. But in the case where starting LAN source in unavailable, the PXE error appears and shows this message.

  Usually, the BIOS passes LAN Boot option because the other options are not active. This means that the CD/DVD drive does not any bootable disk and the HARD disk is dead.

  So, as you can see you hypothesis was right that the HARD drive could be faulty

  In any case, try to access the BIOS and set it to the default settings save changes and then try to reinstall Windows XP.
  You might also try another HARD drive, I know as your fist HDD recognized correctly but it s worth a try to test the 2nd HARD drive.

• Windows Defender works not security updates will not install required valid security certificate?

  First of all, I was unable to unstall updated, then it was not valid certificates of security no. I can't turn defender of windows on my computer of freezer

  I tried everything and I can't fix it it seems to deteriorate.

  Hi VelmaMarcum,

  ·         Do you have any other security software installed on your computer except Windows Defender?

  ·         What happens when you try to install Windows Update?

  ·         What is the error message right received invalid security certificates?

  ·         When exactly do you get this error?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the article in the Microsoft Knowledge base and check if it helps.

  Troubleshooting of Windows Defender

  http://support.Microsoft.com/kb/555957

  Method 2: The problem with Windows Update, you can see the article.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps.

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K