5532 ENVY: ENVY 5532 has a connection wireless but not recognized

Similar Questions

• Computer Dell laptop connects wireless but not online

  I have a Dell laptop that I bought about five months ago. We just bought a router wireless about two weeks ago and it was working fine until a few days ago, when the internet connection is slow all day until we have reset the internet modem itself. That day, my computer wouldn't connect to the internet after a few hours of surfing on slow internet. After that reset us it, he started to work very well. Then, the next day it was working fine until it just stopped to let us browse the internet. My desktop computer that uses a USB connection wireless and the Xbox 360 with WiFi, both work. Now, I pressed my button wireless countless times, and I am connected to my network with almost full bars. Some of the software on my computer can connect to the internet, as the update of windows, but I can't use any internet browser - I use Safari, but I tried as well IE. When I look at the plan of the connection, there is a line dashed to the router from my computer, but he always says that I have full internet access. Has connectivity IPv4 and IPv6 is not. I tried to uninstall my card, but it did not reinstall rebooted once and I undid the system restore I had tried a few days earlier to pick up my internet. We also tried to connect with an ethernet cable - says there is connection, but also will not let me do anything. Also, I ran diagnostics on my cards and Windows said reset, but I still have the problem and it "resets" whenever the diagnostics are executed. IP address of my router starts with 192. I've searched and searched for answers, but nothing works.

  The new answers?

  Hello

  Try the following steps:

  
  Step 1: first of all, temporarily disable the firewall settings and security software and check if it makes a difference.

  
  NOTE: Please check you to re - activate the anti virus program after reviewing the issue.

  
  Step 2: make sure you have the latest updates and service packs for Windows Vista.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Install-Windows-updates

  
  Step 3: battery Reset TCP/IP.

  To reset the stack TCP/IP go to this article and click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Laptop can connect wirelessly, but not through cable utp to the internet. Help!

  I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

  Thanks for your help in advance! :)

  I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

  Good luck.

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,

• Officejey 8620e Pro: Officejet Pro 8620 connect wireless but not visible by any other device of

  Printer was fine for 9 months.  That is, Apple devices could print using AirPrint.  Computers laptops MacBook Pro and Windows 8 were also very good.  But now printer is not visible by any device when trying to print / set up a printer.  Finally managed to do work with a USB cable, but it's not practical for all members of the family.  Have you tried:

  Full power reset

  Reset wifi

  Updated drivers

  Recycled all devices that are used to be able to see the printer.

  To confirm, the printer says that it is connected to the wifi & AirPrint and wakes up when the control panel is touched.

  Thanks in advance

  Hello @Insightful_Chap! I'd love to help you with your Pro Officejet 8620.

  I understand your description that the printer is connected to your network, but is no longer visible for your devices. Although the printer is connected, I would allows you to use the following document to solve the problem as it will guide you through the necessary steps: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection.

  Please let me know the results of your efforts and we can go from there.

• Equium laptop computer connects cable but not wireless

  Hello

  I m hoping someone can help. I have a laptop Toshiba Equium and it has been connected wireless for centuries. All of a sudden last night it stopped working.
  I have 2 of these laptops and it works fine and all my phones in the House and consoles are connect wireless fine so I know that this is not a problem with the hub.

  I try to make a new connection and it says unable to connect and when I click the diagnose button, it says "windows received no response from the access point or wireless router.

  I can use the net fine with a wired connection to the hub.
  When I check for available wireless connections it shows my super blank hub with excellent signal
  I tried updating drivers and also uninstall the card network wireless and re install but this nature does nothing.

  Please can someone help. more necessary info just reply.

  Thanks in advance to all those who help

  If I understand you right WLAN adapter is installed and enabled correctly, your laptop can detect WLAN but cannot connect to it, right?
  Have you tried to reboot your router?

  What operating system do you use?

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• OCR has worked with xp but not windows 7

  With the help of HP C3180 all-in-One printer and Windows 7, 64-bit.

  OCR has worked with XP but not with 7.  Am I missing something?

  Hello belcanguy

  If scanning with I.R.I.S. only shows the scan to image that says Solution Center? Try I scan a document using the Solution Center and see if you can choose an OCR pdf or RTF document.

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Photosmart Premium C309m cannot connect wireless, but Setup is OK

  I felt for a few months and in the last days he stopped wireless connection. I use Windows 7 and restored to the previous time, but it has not fixed the problem. I've uninstalled and reinstalled the software, turned the printer power button etc but it's the same question.

  When I open the HP Solution Center, I get the message saying the printer is disconnected. If I go to the printer and use the Network Wizard it can communicate with the router and I get a Test report saying 'congratulations etc etc and everything's a pass

  Looking at the config menu router you can see that the printer is there but its status is not active.

  The IP address remains the same, but when I look for the printer on the network, McAfee I can't.

  Any ideas?

  OK, rented DSL routers are, well, problematic.  Sometimes the DSL providers have more control on their router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

  In addition, WEP is quite sure.  It can be broken with freeware in 10 minutes approximately.  You can change your WPA or WPA2 security type?

• Connected wireless but no internet access

  I recently bought a used laptop and cannot get wirelless internet access. Its a HP Pavilion and I am able to access the internet if I use the LAN, but not via the wireless connection. He says that I'm connected to my wireless network, but when I try to open IE, there is no internet access. I tried to fix it and I get an error that there is always a problem. I have reset the modem and disabled my firewall. Any other suggestions? I am running Vista. Thank you!

  Hello

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 2:

  Also refer to this article and check if it helps:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  See also: Wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• So slow connection wireless but ok with dongle...

  I am running Vista Premium on a Compaq Pressario laptop and had no problem until last week. then I connected to my wireless laptop one day and it was so slow, I restarted and did it again. No joy, it is still slow. I can not connect my camera or phone on the laptop because it will not recognize either. In Device manager all my 6TO4 adapters are highlighted so are also all my ISATAP adapters. I tried to uninstall / reinstall but not good. If I plug my Dongle my connection is back to normal, but still not not recognizing my USB key. So I can't load my phone or transfer through photos. System restore would not have worked either. I've been on a lot of forums and these network adaptors cause a lot of problems for people. Any help would be accepted with gratitude!

  Hello

  I'm sorry that I have to keep asking questions rather than give answers.

  You do not have a public network topology and I can well understand how it works.

  Where your main computer becomes the Internet from?

  If it is connected directly to the Internet via cable, and you have a secondary wireless card in the host computer. So I guess that the device wireless using the wireless adapter and configured Ad - Hoc with ICS.

  If you unplug the main Internet streams and connect a Dongle (wireless Internet), then ICS must be reconfigured to work with the Dongle and wireless adapter...

  If indeed all the above devices using ICS with high AD - Hoc wireless connection, it will work very slow as the Ad - Hoc wireless connection is incapale to adequately provide some customers 'Speed' (it is the nature of the 802.11 g Wireless ad-hoc).

  The general public solution to this problem is to use the cable/DSL router wireless to the Internet source.

  Regarding the USB ports. The electric current which can be taken from the USB ports is limited and particularly weak in laptop computers.

  Connect devices like a phone or USB to USB light charger a computer judge the electric current is too weak to support at the moment where another device.

  As a guess, are this system installed in a recreational vehicle, or trailer using public access point?

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Compaq Presario C776CA connects wireless but no internet

  Compaq Presario C776CA Notebook PC

  Never had a problem until we changed our internet provider... now, he cannot get a wireless internet connection. If I plug the ethernet cable, it works very well. We have a 2 other laptops in the apartment that all connect to the wireless very well (if it's relevant, one is a mac book and the other is a computer laptop gateway).

  I tried all troubleshooting stuff and nothing works. I tested haven-t, but I do not know the laptop would be still not connect to other wireless connections, but not this one. WHY and how to fix it?

  This is the error I get on Google chrome: (sorry, in French)

  Error 105 (net::ERR_NAME_NOT_RESOLVED): could not resolve the DNS server address.

  Help, please?

  Hello:

  If you have a network Atheros wireless card in your laptop, see if the latest driver solves the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Paul