Not very nice or handy and iam correctly pressed the button to 19.66 and Adobe gave me the 12,09

Similar Questions

• Changing from PC to Mac. I finally managed to download CS6 Design Standard. After entering the serial number it says that it is not valid even if I've copied correctly from the disk.

  Where should I go now?

  Serial numbers are specific to operating systems as are the versions of the software... your Windows of CS6 version will not work on a Mac and your windows serial number will not work on a Mac.  Since it is CS6 you have the possibility to change platforms.  See the following for instructions:

  Product order | Platform, language Exchange

• I'm not very technical... My memory of the iPhone 6 is almost full, mainly photos, I have an iCloud account 50G, how do I find out what that is on my iCloud? And can I remove photos from my phone?

  help with iCloud

  If you are connected to iCloud on the phone and sync photos, if you delete them from your phone they will be deleted to iCloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone storage.

• not happy trying to cancel and adobe sent me in circles with no contact info

  I am trying to cancel the membership at least, adobe does not show the order to cancel it, but is charging me there is no phone number to call or chat that I need to be contacted immediately

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  Support chat | To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Cancel your subscription or membership. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

• PC does not, but windows 7 will be when you press the stop button

  CTM PC with Intel DQ45CB M/Bd - has an Intel Core 2 Quad CPU Q8400 @ 2 .66GHz clocked at 2.66 GHz

  System op of Win 7, latest updates everything is made.

  BIOS reset by changing the jumper block of configuration 1-2 to 2-3 m/bd. Restart the pc & then putting again. The battery also renewed. Also BIOS update made to the most recent available.

  Have you tried bypassing startup items and services to the configuration system. It does not correctly close from safe mode?

  I ran out of clues someone at - it a suggestion?

  Did you get my reply. Your suggestions led me to check the hardware including RAM - a few intermittent defective RAM sticks was the answer. It caused blue screens & also the prob of closing.

  Thanks for your help.

  (I'll mark this as answer - my previous attempt I've marked as an answer & it's gone)

  Your help much appreciated / Lyle Giles.

• Extention does not settle in Premiere Pro and AE!

  Hi, I'm from the excuse of France my bad English, I'm working with windows Seven 64, I work with the creative Application of cloud

  
  

  
  

  Yesterday, I bought the name extension: stabilizer for Windows by modules = > > https://creative.adobe.com/addons/patches/3911
  

  
  

  
  

  and I installed following the procedure, but the effect does not appear in first pro and after effect. = > > Adobe Exchange
  

  
  

  
  

  It's yet to 'On' mode in Adobe Extension Manager what is the Solution?

  
  

  all this is not very serious!

  
  

  J’ai am using the Adobe box support. their answer is clear and precise: they manage these problems !
  
  
  

  
  

  can someone help to solve me this problem problem please ?

  I found the solution for those who are interested... in fact we had extension updated to the CC2014.1 AGENCY

  NewBlue FX support sent me the update of the plugin and everything is ok now.

• I'm administrater whenever I have download something and you try to open it say parmiters not correct with the result that the average and especially if it worked yesterday how does this error occurs

  Please tell me how or what to reset the paramiters I admin I think someone is intentionaly changing settings so I can't access my computer not very good in this area and need to know

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
  PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't connect to the other user account... error message read s 'user name' or password. We have not set up a password and user name is correct.

  I can not access another user account.  It to request a username and password.  I enter the user name is correct and there is no password.  The login page, used to have two icons of the user; but for some reason, the last log on the user icon is here and a new white icon for the new user.

  Once a week a few posters noted a problem similar to yours. In this case, I post the answer you see below. The little that I find very irritating that in each case, without exception, the poster was not able to return and account for the results, either because they found my recipe too difficult to follow, or because he or she lost interest, he or she could not be bothered to post a few comments for the benefit of other people with the same problem. There it is again...

  I do not know why you can not change this password, but maybe this method will shed light on the question:

  1. Safe boot mode.
  2. Click Start.
  3. Type the three letters cmd into the search box.
  4. Press Ctrl + Shift + Enter
  5. Click on "Run as Administrator".
  6. Type the following commands and press ENTER after each one:
     'John Doe' ppp NET user / add
     (to create an account called "John Doe" with the ppp password)
     net localgroup administrators/add "John Doe"
     (to promote "John Doe" to the Administrators group)
     net localgroup administrators/del 'John Doe'
     (to demote this account)
     NET user "John Doe" ppp
     (to set the password for John Doe at ppp)
     NET user "John Doe" / active: Yes
     (to activate this account)
     NET user "John Doe" / active: No.
     (to disable this account)
     NET user "John Doe" / del
     (do not delete this account)
     NET user
     (to view all existing account names)

• I can convert pdf to word format adobe acrobat, DC but my version of word is not correct because after conversion, fonts and lines are not correct in the original pdf document.  I am currently using version 6.1 of windows 7 service pack 1 build 7601. Is -

  I can convert pdf to word format adobe acrobat, DC, but my version of word may not be correct because after conversion, fonts and lines are not correct in the original pdf document.  I'm currently using version 6.1 of windows 7 service pack 1 build 7601 Home Premium. Is it possible that I might have to upgrade my windows 7 in order to get good conversions of PDF files in word files?

  No, it won't be linked to your version of Windows. Probably, you wait too long. Conversion cannot be perfect except for the files very easy.

• Correction of the goal will be not objective to detect and fix automatically

  I'm having a time with lens correction LR 3.2 function, but it does not auto detects the lens.  I have all the profiles loaded, I checked.  I convert all .dng .nef format.  (Nikon shooting game)  When I activate profile corrections configuration button changes Custom and the "maker" lens drop-down profile says nothing?  and on the bottom it reads "Unable to find a matching profile automatically." If I change do so at Tamron by selecting it manually, for example, he finds the profile and all is well.  How in the hell I put in place for the connection profile is automatically enabled and the right lens appears without intervention?  Hope someone can help with this... I work through 500 down selects, and it would be nice to solve this problem.

  I can see all lens info in metadata on the screen normal library?

  Thanks a lot for your help in advance!

  If you are Tamron lenses...

  Here is a quote from a post by Eric Chan (one of the developers of LR/ACR):

  Re: the Sigma 10-20 issue. Unfortunately, we cannot always automatically determine with 100 percent certainty the identity of the lens used to rotate the image. We try to be conservative. So if in doubt, we do not choose one automatically. For some third party lenses, this can occur. By choosing Sigma of the popup to do is the right thing to do in this case.

  However, you can try the following trick:

  1. Choose an image taken with a Tamron lens.
  2. Go to the correction of the lens. (The lens profile auto-detection is supposed to be impossible at the moment.)
  3. Choose the Tamron and the profile in the list.
  4. Falling to the bottom of the list of parameters and choose 'save new lens profile Defaults.

  This should rememeber optical configuration (slider and profile) for the camera/lens combination given.

  You can also use a develop preset to apply a correction of the lens quickly.

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• When you install Microsoft Streets and Trips 2010 download. He wrote not correctly in the registry. Program does not start.

  I had problems with my version of Streets and Trips 2008 and decided to upgrade. After installing Microsoft Installer, I get the same error message. "the program has not been copied correctly in the registry. Rerun Setup from the same place. »

  Try the procedure suggested Installation problems streets & trips 2010

  If that does not solve the problem with your new streets & trips 2010, tell us what problems you have experienced with your earlier version of streets & trips 2008. Only has the old installation refused to start, or other issues?

  You can look for answers and advice associated with Microsoft Streets & Trips to the forum: http://www.laptopgpsworld.com/microsoft-streets-trips/

• When I print, the photo viewer rises and am OBLIGED to print from that program. The problem is, that it does not work - the colors are inverted and incorrect. All attempts to correct in the color management failed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • When I print, the photo viewer rises and am OBLIGED to print from that program.  The problem is, that it does not work - the colors are inverted and incorrect.  All attempts to correct in the color management failed.  Some images are color reversed negatively. and others not when the print window picture viewer options are increasing. and every time I print a normal color on the picture he reverse out come.
  • Recent changes to your computer
  • What you have already tried to solve the problem

  didn't work :/

  ==============================================
  It may be interesting to try to remove all color profiles in the color management.

  Windows 7 - change color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  If this does not work... update or just reinstall your printer driver may be worth a try.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.