Nothing but problems & at the end of my tether

I bought this DV7T-7000 it not so long ago and had any other problems with it.

She kept in and finally started to freeze. I thought it was the hard drive, but he came to find out later that the Nvidia card had problems (error 43). I have fixed a lot of computers in the past I did the usual stuff like reinstall the drivers, reinstall the OS, hard drive test, tests of memory, etc..

I called a representitive of support who had me send the computer in the system board replacement.

It took 12 days to get my computer back, then 6-8 hours after it was up & running the card crashed again. Back to the hotline, where the guy has me press the Windows key & key 'b '. He said it was to roll back the bios. He had heard this same issue.

It worked - for about 6-8 hours. Then the map is broken once AGAIN.

Back to telephone support. After checking all my info still ONCE he uninstall & reinstall the drivers, although I told him that I had already done. Whatever, I her mood. Of course, it did not work, and he has essentially silent and apologies just at this moment. He did suggest reinstalling the OS AGAIN to see if that helped. I thanked him and we went our merry way.

Get frustrated at how the laptop worked, I decided I just go ahead and wipe it once AGAIN to see if there is nothing. (I deleted this thing several times now & spent hours to reinstall programs - it gets very old)

So I expect the process of re-Setup finish and when Windows begins to start I get a blue screen. It is said that my bios version is not compatible. Now, I have no laptop to use at all.

Call HP Support AGAIN, go through 5 minutes of verification of information, say what is happening - and she asked me to sit on the phone with her, while AGAIN performing a test drive a wide, and then a memory test AGAIN.

All this for an incompatible BIOS - probably because of the price drop I did previously? If it has already been selected several times?

I'm about to lose my mind. I don't seem to be getting anywhere, and I really need this phone to work. I create Web sites. I can't keep reformatting & do all these stupid human things day in and day out, just to send the same computer back repeatedly for the same exact problem?

What on earth am I doing here? I even bought a 3 years Care Pack with the ACP countries, and I'm still without a computer.

I literally see go me through that for the next 3 years. Not exactly what I spent all that money for.

Is it possible to work around all the time to lose so I can have a working computer, or I am doomed now?

Merry Christmas. (as if)

Thank you. I'll keep an eye out for it.

Tags: Notebooks

Similar Questions

HP Pavilion: Nothing but problems in the months since I changed to win 10

I have about a four year old computer that was drawing up along very well under Win 7. Since evolution to win 10, nothing went right. Spoil, to correct and then ruin once again. For example, for most of the time since the change, my #2 monitor has gone green. A week ago, he corrected himself and was back as it should. Today, it is green again.

I got no sound since the change, even if the help desk assured me that all was well with my Boston speakers. Thinking that the speakers might be defective, I bought a cheap set of Logitech speaker so see if they had a job. I am told that they are not connected even though I checked all the plugs and the light is on.

Last week, my office has migrated to monitor #2 and I couldn't find a way to get it back. After several reboots, it returned to its normal position, but all my icons were scattered and I had to reorganize their. When I Hibernate and then turn it back on the computer, I get a black screen with the blue window but never get the spinning wheel. I have to make a difficult outing so he could restart. I get a message that DVI and VGA have no signal.

I can't wait to play the card of geratric but, people, I'm longer than dirt and I don't need this frustration. I spend every spare minute in forums and reading and read without result. I am at a loss to know what to do now. I'm even not sure I write in the right forum. I started thinking that the best solution would be to get a new computer running Windows 7. I don't want to take this one back to 7 because I think that 10 screwed up too much. I know I'm evacuation but no help and advice will be greatly appreciated.

Thank you for the information, @bargrid.

I can understand your frustrations. I was in your position several times in my 30 years of use and runs on computers. In fact, I'm here to help you cause to help I got here when I was at the point of throwing my new HP computer at the door.

Here is the manual for the speakers:

http://EC1.images-Amazon.com/Media/I3D/01/A/man-migrate/MANUAL000010448.PDF

In Page 3, it shows how to connect to them. Since you have only a CAP, I suggest plug into each of the ports on the back of your computer. Keep the volume down, so if there is a noise when it is connected to a bad port, it won't scare you or blow the speakers. As I said, I have two cards for my speakers. I had to do exactly when I plugged in to my new loan from HP computer. Let me know what happens.

Problem in the end result in PL/SQL

Dear all,

I have a problem in the final output of PL/SQL. I use the slider and a SQL statement. Here is the complete procedure. Start by selecting after BEGIN inserts values into a table and that's fine. When second SQL is called by the SLIDER by updating the table again, I'll have with duplication of values. It seems a logical error. If you would be grateful if a help in this where is the problem and how to solve that?

Thank you

CREATE OR REPLACE PROCEDURE P_PhotoCap_Report
                                           IS

/*
  Local variable declaration.
*/

      v_locationcode  VARCHAR2(4);
      v_day_0         Number(10):=0;
      v_day_1         Number(10):=0;
      v_day_2         Number(10):=0;
      v_day_3         Number(10):=0;
      v_day_4         Number(10):=0;
      v_day_5         Number(10):=0;
      v_day_6         Number(10):=0;
      v_day_7         Number(10):=0;
      v_day_8         Number(10):=0;
      v_day_9         Number(10):=0;
      v_day_10        Number(10):=0;
      v_day_11        Number(10):=0;
      v_day_12        Number(10):=0;
      v_day_13        Number(10):=0;
      v_moredays      Number(10):=0;
      v_diff          VARCHAR2(5);
      v_daily_enrol   Number(10):=0;
      v_sum           Number(10);
      v_average       Float(10);


      CURSOR c_insert_values IS
             SELECT locationcode
             ,decode(length(to_char(TRUNC(enrol_date) - TRUNC(photo_date))),1,to_char(TRUNC(enrol_date) - TRUNC(photo_date)),'>13')
             , COUNT(*)
             FROM track_id
             WHERE TRUNC(enrol_date) = TRUNC(SYSDATE-1)
             GROUP BY LOCATIONCODE, decode(length(to_char(TRUNC(enrol_date) - TRUNC(photo_date))),1,to_char(TRUNC(enrol_date) - TRUNC(photo_date)),'>13');

   BEGIN

         INSERT INTO reporting.photodate_report (locationcode, locationname, total_enrol)
            SELECT a.locationcode, (trim(b.locationname)||' '||b.DESCRIPTION),  count (*)
            FROM track_id a, location b
            WHERE  to_date(a.enrol_date,'DD/MM/rrrr') = trunc(sysdate-1) AND a.locationcode = b.locationcode
            GROUP BY a.locationcode, (trim(b.locationname)||' '||b.DESCRIPTION);

         commit;

   OPEN  c_insert_values;
   LOOP
   
         FETCH c_insert_values into v_locationcode, v_diff, v_daily_enrol;
         EXIT WHEN c_insert_values%notfound;
         CASE
            WHEN v_diff = '0'   THEN v_day_0 := v_daily_enrol;
            WHEN v_diff = '1'   THEN v_day_1 := v_daily_enrol;
            WHEN v_diff = '2'   THEN v_day_2 := v_daily_enrol;
            WHEN v_diff = '3'   THEN v_day_3 := v_daily_enrol;
            WHEN v_diff = '4'   THEN v_day_4 := v_daily_enrol;
            WHEN v_diff = '5'   THEN v_day_5 := v_daily_enrol;
            WHEN v_diff = '6'   THEN v_day_6 := v_daily_enrol;
            WHEN v_diff = '7'   THEN v_day_7 := v_daily_enrol;
            WHEN v_diff = '8'   THEN v_day_8 := v_daily_enrol;
            WHEN v_diff = '9'   THEN v_day_9 := v_daily_enrol;
            WHEN v_diff = '10'  THEN v_day_10 := v_daily_enrol;
            WHEN v_diff = '11'  THEN v_day_11 := v_daily_enrol;
            WHEN v_diff = '12'  THEN v_day_12 := v_daily_enrol;
            WHEN v_diff = '13'  THEN v_day_13 := v_daily_enrol;
            ELSE v_moredays := v_daily_enrol;
         END CASE;
         
          v_sum := (v_day_0)+(v_day_1)+(v_day_2)+(v_day_3)+(v_day_4)+(v_day_5)+(v_day_6)+(v_day_7)+(v_day_8)+
                      (v_day_9)+(v_day_10)+(v_day_11)+(v_day_12)+(v_day_13);
       v_average := ((0*v_day_0)+(1*v_day_1)+(2*v_day_2)+(3*v_day_3)+(4*v_day_4)+(5*v_day_5)+(6*v_day_6)+(7*v_day_7)+(8*v_day_8)+
                          (9*v_day_9)+(10*v_day_10)+(11*v_day_11)+(12*v_day_12)+(13*v_day_13))/v_sum;
         
         UPDATE PHOTODATE_REPORT a
         SET    a.day_0 = v_day_0,
                a.day_1 = v_day_1,
                a.day_2 = v_day_2,
                a.day_3 = v_day_3,
                a.day_4 = v_day_4,
                a.day_5 = v_day_5,
                a.day_6 = v_day_6,
                a.day_7 = v_day_7,
                a.day_8 = v_day_8,
                a.day_9 = v_day_9,
                a.day_10 = v_day_10,
                a.day_11 = v_day_11,
                a.day_12 = v_day_12,
                a.day_13 = v_day_13,
                a.moredays = v_moredays,
                a.avg = v_average
          WHERE a.locationcode = v_locationcode;
          
           
      END LOOP;
      commit;
      CLOSE c_insert_values;

  END;

Published by: BluShadow on March 15, 2011 09:55
formatting with {noformat}

{noformat} tags

I think this could probably be done in 1 sql statement, rather than an insert and update in a cursor for loop.

However, I do not understand:

DECODE(LENGTH(TO_CHAR(TRUNC(enrollment_date) - TRUNC(photo_capture_date))),
              1, TO_CHAR(TRUNC(enrollment_date) - TRUNC(photo_capture_date)),
              '>13')
         AS diff,

When it seems you're after 15 categories?

You will get results from:
'0 ', '1', '2', '3', '4', '5', '6', ' 7', ' 8 ', ' 9' and ' > 13' than decode, since ' 10' has a length of 2.

You are maybe after:

CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) <= 13
          THEN TO_CHAR(TRUNC(enrollment_date) - TRUNC(photo_capture_date))
     ELSE '>13'
END diff,

If so, then the whole process could be reduced to a query, for example (not fully tested):

INSERT INTO reporting.photodate_report (locationcode,
                                        locationname,
                                        day_0,
                                        day_1,
                                        day_2,
                                        day_3,
                                        day_4,
                                        day_5,
                                        day_6,
                                        day_7,
                                        day_8,
                                        day_9,
                                        day_10,
                                        day_11,
                                        day_12,
                                        day_13,
                                        moredays,
                                        total_Enrol,
                                        avg)
SELECT locationcode,
       locationname,
       day_0_count,
       day_1_count,
       day_2_count,
       day_3_count,
       day_4_count,
       day_5_count,
       day_6_count,
       day_7_count,
       day_8_count,
       day_9_count,
       day_10_count,
       day_11_count,
       day_12_count,
       day_13_count,
       moredays_count,
       total_Enrol,
       (0*day_0_count + 1*day_1_count
                      + 2*day_2_count
                      + 3*day_3_count
                      + 4*day_4_count
                      + 5*day_5_count
                      + 6*day_6_count
                      + 7*day_7_count
                      + 8*day_8_count
                      + 9*day_9_count
                      + 10*day_10_count
                      + 11*day_11_count
                      + 12*day_12_count
                      + 13*day_13_count) / (day_0_count + day_1_count
                                                        + day_2_count
                                                        + day_3_count
                                                        + day_4_count
                                                        + day_5_count
                                                        + day_6_count
                                                        + day_7_count
                                                        + day_8_count
                                                        + day_9_count
                                                        + day_10_count
                                                        + day_11_count
                                                        + day_12_count
                                                        + day_13_count) avg
FROM   (SELECT a.locationcode,
               TRIM(b.locationname)||' '||b.description locationname,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 0 THEN 1 ELSE 0 END) day_0_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 1 THEN 1 ELSE 0 END) day_1_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 2 THEN 1 ELSE 0 END) day_2_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 3 THEN 1 ELSE 0 END) day_3_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 4 THEN 1 ELSE 0 END) day_4_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 5 THEN 1 ELSE 0 END) day_5_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 6 THEN 1 ELSE 0 END) day_6_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 7 THEN 1 ELSE 0 END) day_7_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 8 THEN 1 ELSE 0 END) day_8_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 9 THEN 1 ELSE 0 END) day_9_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 10 THEN 1 ELSE 0 END) day_10_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 11 THEN 1 ELSE 0 END) day_11_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 12 THEN 1 ELSE 0 END) day_12_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 13 THEN 1 ELSE 0 END) day_13_count,
               SUM(CASE WHEN TRUNC(enrollment_date) - TRUNC(photo_capture_date) = 13 THEN 1 ELSE 0 END) moredays_count,
               COUNT(*) total_enrol
        FROM   track_id a,
               location b
        WHERE  TO_DATE(a.enrollment_date, 'DD/MM/rrrr') = TRUNC(SYSDATE - 1)
        AND    a.locationcode = b.locationcode
        GROUP BY a.locationcode,
                 TRIM(b.locationname)||' '||b.description);

This has the advantage of being easier to maintain (you can run the select part of sql outside of the stored procedure to see what are the results!) as well as more efficient!

Published by: Boneist on March 16, 2011 15:30

Changed swing to AMOUNTS COUNTIES, as days with no settlement would be present as NULL, rather than 0. by using SUM avoids the need of NVLs elsewhere.

Nothing but problems, now "failed to resolve the short name.

I've implemented 2 esx servers and a vcserver... I can solve all the names on my vcserver very well. Both ESX servers are pointed to the DNS server and yet they cannot solve the other since the service console. Should not be able to? AND I can not activate HA because I get the error in the screenshot. What I am doing wrong? Do I have to have a file host also? If so how can I get that?

In each respective SC follow these steps

cat /etc/resolv.conf on the two SC (output should be the same)

# hostname (the result should be the domain your ESX host's FULL name)

dig @x.x.x.x whatever.localdomain.com (where x.x.x.x is the IP address of your primary DNS server, if the request fails check UDP 53 ESX host access to the DNS server, or that the file is OK)

Re-install the software to windows 7 but missing at the end

I had to wip for my drive for many reasons and was able to load my OS drive, but it seems that I missed Dell the Microsoft Works disc that came with the computer when I ordered it. Any ideas on how I can get this software without going to the store and spend more money!

Hi Erin

You can download Microsoft Works of Digital River, Microsoft online partner, no product key is required:

http://www.heidoc.NET/Joomla/technology-science/Microsoft/55-Microsoft-Works-9-0-direct-download-links

Then, I started having this problem after the end of the program. Am I just out of luck?

Are there opportunities that I could get Apple to always do the replacement or am I just stuck with a unstable machine? Any suggestions?

Thank you.

A few additional details on my machine:

MacBook Pro 15 "(mi-2010)"

2.4 GhHz Intel Core i5

4 GB 1067 MHz DDR3

NVIDIA GeForce GT 330M 256 MB

You will not get a free logic board replacement from Apple. You will have to pay for it.

However, you can install this application that allows you to clear the discreet GPU and only use one integrated:

https://gfx.IO/

There will be a video performance degradation.

Ciao.

CHKDSK from every time I turn on my computer, but stalled before the end

Why CHKDSK is from whenever I turn on my computer, and why is it at the point dead 46% in the process? I guess that a better question is what can I do to prevent this?

Why CHKDSK is from whenever I turn on my computer, and why is it at the point dead 46% in the process? I guess that a better question is what can I do to prevent this?

Hello

How does the CHKDSK begins? Do you want to say that it begins after you log in to Windows? This happens in fashion as well safe? If she starts after you open a session and is not a Mode safe then please, try the following

[1] method: Set up the commissioning of the elements by using the utility Configuration of Microsoft
- On the start menu, insert the following text and press ENTER: msconfig
- On the Startup tab, uncheck the unrecognized elements
- Click OK to save the changes
Thank you
I hope this helps :)

How can you "Bring object to Front" (but not to the end!) in AS3?

1. imagine a swf file that shows an image (the image is a music video btw).
2. now imagine three objects behind which frame (each are video clips).
3. I use the ' object bring forward the "code snippit of each have three objects come forward when you click it.
Question: How can I do so that the objects do not go in front of the image?
P.S. I'm super new to AS3, so feel free to talk to me like I'm a child of five. I'm not offended.

/ * Wear any object clicked forward

By clicking on any symbol on the stage posing in front of all other cases.

*/

This code makes all occurrences of symbol on the clickable scene by listening for the CLICK event.

for (var fl_ChildIndex:int = 0;

fl_ChildIndex<>

fl_ChildIndex ++)

{

this.getChildAt (fl_ChildIndex) .addEventListener (MouseEvent.CLICK, fl_ClickToBringToFront);

}

This is the function that moves the selected object to the front of the display list

function fl_ClickToBringToFront(event:MouseEvent):void

{

this.addChild (event.currentTarget as DisplayObject);

this.addChild (yourpictureframe);

}

Problem with the Apple start and stop music

s everyone having problems with Apple music constantly stop and start today? It is on my PC and iPhone.

What is your internet connection?

Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

https://www.Apple.com/support/SystemStatus/

ALWAYS the end-user license agreement appears with invites to PRINT, ACCEPT or REFUSE them all products ALL MS Office are open - all MS products are ENABLED!

I've just updated from XP Pro on WINDOWS 7 OS _ I reinstalled my MS Office 2003 product set and they were almost OK. My problem - ALWAYS the end-user license agreement appears with the prompt to PRINT, ACCEPT or DECLINE each time I try to use one of the MS office products is open. It's not a big deal, but it's annoying to get that invites each and everytime I open WORD, EXCEL, OUTLOOK, etc.

What can I do to solve this problem.

Thank you
Bob

Hi Carey.

Thank you very much for your help. It works! Once again THANKS - Bob

My site will disappear after the end of the trial of Muse?

I downloaded a demo of Adobe Muse and bound to catalyst for business for a Web site, so it is now out there but my trial runs, so my question is, if during my trial run out, will be the site to stop working? Or he will always continue to work?

In the case trial exhausted Muse so you don't power update the site of Muse or sync save all changes through browser Edition.

The site will still work as you said trial BC does not end, but once again update synchronization of return of BC to Muse and Muse site will be a problem after the end of the trial of Muse.

Thank you

Sanjit

Downtime planned at the end of the alert window
We just started to use the "Time out on demand" feature of EA HQ (4.1.2 build #1053) and while everything works as expected on the planning of the systems down (alerts and other are disabled), we have a bit of a problem at the end of the window. It seems that if leave us the end of the calendar window or clear plan, all alerts on the fire of monitored servers. It seems to take anywhere between 10 and 15 minutes for the mental health back and for systems to return all green.

We are scheduling maintenance is an application to all of our servers tomcat deployment in a cluster. The alarm that fires comes from a status page of the private system, we check every five minutes in order to ensure the happiness of the app/VM. We are in fact does not affect the hyperic agent, so it is not really a failure he or any change in itself.

When get out us the planned downtime, they all fire immediately their alerts, and some systems claim to take up to 15 minutes to get out of the alert, despite the agents themselves never be disconnected during shutdown. Additional weirdness, when alerts are displayed in the center of the table edge and alert, they are an hour late system (unfortunately, I don't have a snapshot of the browser with the time system down and fresh alerts at the top, but it certainly happens).

Any thoughts on what could happen here and how we can avoid getting 20 pager alerts?

; MN P
Some internal bugs have been recorded for this specific question. Both have been resolved in HQ 4.2

Problem with the last 5 minutes of the audio book to cut

My wife recently bought a Clip Jam for listening to audio books. She had a problem with the end of books - the device does not play the last 4-5 minutes of the last chapter of a book. IOW, it ends at the beginning. It must then go to the desktop PC and listen to the end of the book he (proving it is not a problem with the files themselves). She said that this happens on audiobooks, Audible and audio books, it is in MP3 format.

Someone has an idea what can happen and how I can help him solve?

using improved format audible AAX? IIRC: it is a problem only with improved AAX format. Use the Format 4 and that she must play to the end.

Reading and the end of the sequence

Hello! I have a sequence that is 1 second then the clip in it. But when I hit the space bar or play button in the monitor program, playback stops at the end of the clip, but not at the end of the sequence. How to play where is the playhead at the end of the sequence? Thank you!

You're memory is in error. PP will not play past the last element in a sequence. If it appeared to do, it was only because he does something he was in order, maybe that one frame long, that you simply do not see.

You cannot specify a length of the sequence anywhere within Premiere Pro, as this term is defined only by the last element in the sequence. No clips, no 'duration' and of course, no reading.

Flash player automatically delete SharedObjects # at the end

Hello. I tried games stored on my local drive Flash and I have found that whenever the game is closed any given localhost is deleted. The only way I can keep the data is if I copy the files off SharedObjects # while Flash is running, and then paste in after closing. I have found nothing else a question like that, and I arrived at the end of my tether.
OS: Windows 7 Ultimate SP 1
Browser: IE 9
Flash version: 11.5.502.146

Are you IE running in InPrivate browsing mode? Looks like some process causes your browser (and later flash cookies) cookies are evacuated during the shutdown.

Thank you

Chris

Nothing but problems &amp; at the end of my tether

Similar Questions

Maybe you are looking for

Nothing but problems & at the end of my tether