CS6 with 4K monitor / display - bad & unusable reading, Petite and small cast

Similar Questions

• HP L1906 monitor: HP_L1906 with Windows 10 display does not work

  Under Win7 Pro, I used two monitors, a DELL and HP L1906 (my favorite).  After the Win10 upgrade, the DELL works just fine.  The HP is not displayed.

  In the settings the LP is detected, but under the name generic and none of the parameters of work, nor can they be saved.  I tried swapping the connections, thinking maybe Valentine's video, but always ended up with the monitor DELL works, not HP.

  How can I make my HP L1906 monitor works with Windows 10?

  (pro 64-bit)

  Hello:

  See if the vista driver works...

  I compressed upwards and tied the monitor driver below.

  Download and unzip the drivers in their folder.  Don't do anything with the files in the folder.

  Go to the Device Manager, expand the category of device monitors.

  Click the generic monitor p & p.   Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Re: Tecra S5 - 15 q - monitor display lines vertical and error 43 for GPU

  After about 5 years my Tecra S5 is experiencing problems with its graphics.
  Most of the time the (internal and connected an external via VGA) monitor displays vertical lines, and windows gives an error 43 on the map.

  I was wondering if there is a way to solve this problem, and if this problem could be solved under warranty (although the protohistory of the warranty expired 3 years ago.) .

  In my opinion, it is bad material work and as far as I know only way to fix it is motherboard Exchange. I n t have this model of laptop, but I can presume that the GPU is fixed on the motherboard and cannot be traded separately.

  Fixed under warranty? Of course.

• HP2101i with Windows 7 Home Premium cannot read SDHC card

  I have connected a VR Olympus-379 with photos on a 8 GB SDHC card with a USB port on my HP, and the following message is displayed in the desktop monitor: 'the situation is not available', and inside the box is a big X and the statement 'Q; ------is not accessible. Access is denied. "It does not recognize the connection. It only shows the DVD drive as the only device with removable storage. The same thing happens with my system Toshiba laptop C655 64-bit of Windows operation. How to do one or the other to read the card, so I can see/save photos.

  I just want you to know that the problem is solved. The SD reader was an old I knew couldn't read a map HC. Thank you for your kind cooperation.

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• old PC, new monitor display problems

  Just bought a new monitor for my old Presario SR1500NX, but I can't adjust the screen resolution of 1600 x 900, who wants my monitor - it has a maximum setting of 1024 x 768. (Monitor = from HP2009m, widescreen) The graphics in my PC is "VIA / S3G UniChrome IGP. When I go to the tab view S3 it shows "Display devices" like an old CRT monitor, which I did not. I was using an older 17 '' LCD monitor 4:3 in the last 3 years, & it worked out of this video card, but my new widescreen monitor display is "stretched veeerrryyyy." I think I need a new "video card", correct? If so, can you recommend one if I can buy and install it (I printed installation instructions of a new video from the HP Web site card for my PC). I'm kind of smart with the software, but not the hardware side of computers. I installed more RAM on my PC, so I'm not familiar with the inside. (And no, I can't afford a new computer right now - I know that mine is old, but it works perfectly for my needs, I wanted just a new, larger monitor!) Thanks for any help you can give me.

  AG, here is a video card that should work with your power supply and a new monitor.  It is not a barn burner, but a lot more than the maximum resolution that is required to run it.  It is said that the minimum power is 300W.  However, manufacturers tend to overstate the power requirements of their cards.  Read the customer reviews and specifications on the product Page.  This will give you some good information.

  The card should improve the performance of your computer, too.  It will free the system memory that is shared with the video chip and add video memory on the card itself.  You could improve the memory to 2 GB to increase performance even more.

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Source monitor displays the desktop scrambled instead of video

  When I run PP CS6 and try to play the film screen in the source monitor displays a blurred my office instead (attached image) version. Audio works, the read head movements and changes in power button, but it is not any video.

  This problem started recently, after about 7-8 months of first flawless performance.

  Some system information and software:

  Premiere Pro CS6 version 6.0.5

  Running on a MacBook Pro

  OS X 10.8.5

  Processor Intel Core i7 2.6GHz

  16GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  

  If you need / want additional information just ask.

  Thanks in advance.

  Hi Sportz007,

  Have you tried trashing prefs?

  Thank you

  Kevin

• Premiere Pro CS6 Mac - second monitor has stopped working

  I've been using CS6 configuration dual monitor for a few weeks.  I activated the second screen for video playback in the settings and everything worked very well.  Now for some reason any the second screen no longer works with Premiere Pro for playing video (it will not preview fullscreen) even if for my second monitor option is checked in the preferences. I makes no changes to my system I know.  I really want to understand this because it is quite annoying and frustrating that it worked perfectly for 2 weeks and now it doesn't work at all. (Have restarted system already) Any help would be greatly appreciated!

  I spoke with tech support and they were able to help me solve the problem.  The solution involved moving my program on the second monitor and then reverse the setting of the option (IE, do the main monitor my monitor reading)... after that, I went it back by moving the program on the primary monitor and set the secondary monitor as my reading screen.  Seems to work fine now.

• kernel_task runaway (from 300 to 600%) CPU with 2 external displays

  I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use.  I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.

  Normally, I use my MacBook with two external displays, both at work and at home.  At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens.  After unplugging an external display, the kernel_task subsides immediately to normal (< 5%).  After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so.   I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.

  Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.

  Any ideas on how to fix this resumption of kernel_task of all my CPU?

  I have attached my EtreCheck system report below.  This report was captured with two attached external displays.  At halfway while generating a report, the kicks and started kernel_task hogging CPU again.

  EtreCheck version: 3.0.5 (309)

  Report generated 2016-09-25 14:24:02

  Download EtreCheck from https://etrecheck.com

  Time 07:59

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens.  After disconnecting, the kernal_task subsides immediately to normal (< 5%).  After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again.  The use of the high CPU kernel_task never happens unless I have two external displays connected.

  Hardware Information: ⓘ

  MacBook Pro (retina, mid-2012)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro10, 1

  1 2.6 GHz Intel Core i7 CPU: 4 strands

  16 GB RAM not extensible

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 242

  Video information: ⓘ

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M - VRAM: 1024 MB

  Color LCD 3840 x 2400

  LED Cinema Display 2560 x 1440

  Thunderbolt Display 2560 x 1440

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour

  Disc information: ⓘ

  APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Boromir (disk1) /: 499,05 (Go 140,24 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple LED Cinema Display

  ISight Apple Display Inc.

  Apple Inc. Audio display

  Apple Inc. FaceTime HD camera (display)

  Apple Inc. Apple Thunderbolt Display

  Apple Inc. Audio display

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Thunderbolt Inc. Apple display.

  Configuration files: ⓘ

  / etc/sudoers, 2299 but file size expected 1563

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Beats Updater.app

  com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]

  /Applications/proxifier.app

  [no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]

  / System/Library/Extensions

  [no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]

  Startup items: ⓘ

  TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  [loading] Apple 156 jobs

  [running] Apple 108 jobs

  Launch system demons: ⓘ

  [loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]

  [no charge] 41 tasks of Apple

  [loading] 153 jobs Apple

  tasks of Apple 109 [performance]

  Launch officers: ⓘ

  [cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]

  [loading] com.cisco.anyconnect.gui.plist (2014-06-10)

  com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-29) [Support]

  com.backblaze.bzserv.plist [running] (2016-07-11) [Support]

  com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]

  com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]

  [loading] com.google.keystone.daemon.plist (2016-09-09) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]

  [loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]

  User launch officers: ⓘ

  com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]

  com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  HWMonitor Application (/ Applications/HWMonitor.app)

  Hidden CPULed Application (/ Applications/CPULed.app)

  Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)

  Dropbox application (/ Applications/Dropbox.app)

  Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)

  Beats Updater Application (/ Applications/bat Updater.app)

  Hidden NET Monitor Application (/ Applications/Net Monitor.app)

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-13)

  AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]

  Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]

  JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of

  User Plug-ins internet: ⓘ

  WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]

  Safari extensions: ⓘ

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)

  3rd party preference panes: ⓘ

  Backblaze backup (2016-07-11) [Support]

  Flash Player (2016-08-29) [Support]

  FUSE for OS X (OSXFUSE) (2013-11-30) [Support]

  Java (2016-08-18) [Support]

  MagicPrefs (2016-01-20) [Support]

  MenuMeters (2014-10-22) [Support]

  TiVo Desktop (2009-11-23) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Boromir: Disc size: 499,05 GB disc used: 358,81 GB

  Destinations:

  Frodo Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 09/09/16, 02:09

  Last backup: 25/09/16, 11:49

  Backup disk size: too small

  Backup size GB 999,86 < (disc 358,81 GB X 3)

  Top of page process CPU: ⓘ

  345% kernel_task

  56% Information System

  44% cloudphotosd

  42% iTunesCacheExtension

  30% activity monitor

  Top of page process of memory: ⓘ

  1.44 GB kernel_task

  1.18 GB com.apple.WebKit.WebContent (6)

  786 MB mds_stores

  590 MB bztransmit

  Mdworker (18) 492 MB

  Virtual memory information: ⓘ

  256 MB of free RAM

  4 pm used GB RAM (5.96 GB being cached)

  768 KB used Swap

  Diagnostic information: ⓘ

  25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]

  /System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd

  25 sep, 2016, 13:06:44 test - passed

  September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash

  com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft

  Start safe mode, use this way and see if the problem is recurring

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• Satellite Pro A300-28R - Windows startup with a wrong display resolution

  OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon HD 3470 graphics card.

  Recently, I have connected my laptop to a TV using the S-video connection. It worked well. The problem is that since then, and every time I start my laptop Windows starts with S-video of 600 x 800 display resolution.

  I tried changing the settings in the Panel and using the ATI CCC, having once selected and applied these settings, but whenever Windows starts now it starts with the above display resolution.

  As a result, I've also uninstalled and reinstalled my display driver both package Toshiba value added but the same problem persists. I searched with Google about this problem and have not been able to find something useful.

  Any help would be greatly appreciated.

  Hi dude

  How did you produce the video signal?
  Did you choose Office expanded or all simply the option external monitor by using the FN + F5?

  I think that you need to press once more the Fn + F5 and should switch to a view, internal laptop display.

  Please check if this could help you!