Nothing but problems, now "failed to resolve the short name.

Similar Questions

• ORA-12514: TNS:listener failed to resolve the SERVICE NAME

  Hi all
  
  I had installed oracle 11g software WINDOWS successfully on my laptop and then connected the database successfully through sqlplus.exe. After a long time, I connected the database via sqlplus.exe or TOAD error
  ORA-12514: TNS:listener could not resolve SERVICE NAME given in connect descriptor+ _.
  
  Please provide the solution as soon as POSSIBLE.
  
  
  With regard to:
  ---------------------------
  Isabelle Barnes

  Thanks a lot Edsteven for a quick response...

  Please post the solution so the other may benefit when research in the future; then mark this thread as a RESPONSE.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• AMT-03505: failed to resolve the name

  Team,

  I have 2 databases on a server with a database on port 1521 and the other database is on 1524.I am facing problems connecting with the database that is located on 1524.ORACLE_HOME, ORACLE_SID and path are set on the database that is on 1524.

  I have add the database of 1524 entries in both the oracle homes / / network domain.

  I was able to connect to the database very well, but when I install the enterprise Manager, it throws the below error

  [oracle@oracle-test admin] $ sqlplus / as sysdba

  
  

  SQL * more: Release 11.2.0.1.0 Production on Wednesday 17 June at 11:00:21 2015

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL >

  Em error:

  Check if the administration server WebLogic for the field of Employment and the database that hosts the repository management, are running. After checking to retry the operation. Error: null. If the problem persists, contact the Oracle Support.

  When I try to ping the database located on 1524, he returns with the error below.

  [oracle@oracle-test emagent] $ tnsping EM12C

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 17 June 2015 10:43:39

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  AMT-03505: failed to resolve the name

  Here is my listener.ora file

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = ORCLTEST)

  (ORACLE_HOME = u01/app/oracle/product/12.1.0/db_1)

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = EM12C)    (* My problem is with this database)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1524))

  )

  )

  Here are my tnsnames.ora

  EM12C =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = ORACLE - TEST.mydomain)(PORT = 1524))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = EM12C.mydomain)

  )

  )

  Can you get it someone please let me know what I'm missing here.

  2938783 wrote:

  Stevens,

  Is there a way where I could change the port from 1524 to 1521.Please EM12C let me know.

  Thank you!

  As it was already told, databases use ports.  The listener did.  The release of "lsnrctl status" you showed us presents a listener who is ONLY listening on port 1521 and database EM12C is registered with the listener.  In addition, we know that EM12C was able to dynamically register with this listener, because his status is listed as LOAN.   A static record (in the section SID_LIST listener.ora) would show as UNKNOWN.

  So if you want to connect to EM12C via a network connection (even if the same machine) you would specify (in tnsnames) be directed to connect to the PORT = 1521.

  I don't know how you configure client connection requests in WebLogic.  It is a problem of the customer.

• Workstation 8: Upload failed: Curl error: could not resolve the host name

  I have workstation 8 connected to our ESX host, it shows all the machines and allows me to connect to their end. But when I try to copy/paste/drag and drop a local virtual machine over there he said "Vmware workstation 8: Upload failed: Curl error: could not resolve the host name.

  Someone at - he fell on this or have any ideas why this would be. I think that if it does not find the host name, I could not navigate or connect to my Virtual Center.

  Hello

  Whats is your ESX host name? I would recommend using with full ESX host name during the connection. You can connect to the ESX host using the host name, but to download the VM in this topic, you will need to use FULL of ESX host of domain name when connecting.

  Please try to do it and let us know if it solves your problem.

  Thank you

  Deep

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• Q10 Q10 blackBerry WIFI - browser error - could not resolve the host name

  Hello

  I use my Q10 while overseas for the Wifi only. My SIM card is in my 9900 (thank you BB not to tell anyone that BIS no longer works and WW BB roaming is not until after people buy OS 10 devices, anyway...) but I want to use the Q10 for Skype, browsing and Email while on WIFI.

  Skype works.

  Browser gives "Could not resolve the host name" and charge no emails.

  WiFi network is good (the 9900 is connected and works, as do other devices). I reset the phone, router, etc. etc.

  All to nothing does not.

  A telephone conversation of two hours with T-Mobile (from abroad) was unnecessary and disconnected.

  All DNS data seems to be there.

  Please help.

  Thank you

  Aviv

  Hello

  Problem solved.

  I have reset the router before, nothing helps. The only way I got it work is as follows:

  (1) turn off the router and wait for the phone to 'do not see' to the network in question.

  (2) turn off Wifi on the phone (menu setting and tap on wifi)

  (3) restart router

  (4) restart the phone

  After about 10 minutes, it is finally connected.

  Thank you all,

  I would BB would have simply kept the features of the 9900 and just made more attractive to the masses, instead of making an iphone with a keyboard...

• 11.1.1.3 install, resolve the host name different machine name

  I install 11.1.1.3 on a machine that was used as a machine of Hyperion, but it has been renamed and the old copy of uninstalled, Hyperion.
  
  When I run installtool.cmd, the installer resolves the host name as the former name of the machine, not as the name of the computer is now. When I use the hostname command in a command prompt, I get the new name. Any thoughts?

  Maybe the host name has been corrected in the hosts file, if it's on windows, then check in c:\windows\system32\drivers\etc\hosts

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• I have a creative Member Cloud (one year). As you know, when I download/install delegating creation software, ask the name of user and password. I typed the name of user and password, but it was rejected. Is the user name is the same as Adobe ID? Please a

  I have a creative Member Cloud (one year). As you know, when I download/install software of Creative delegating, askUsername and password. I typed the name of user and password, but it was rejected. Is the user name is the same as Adobe ID? Please advise me.

  Hello

  He would ask your Machine user name and password.

  Kind regards

  Sheena

• I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly

  I want to move virtual machines to a folder called Linux name, but we have several file of the same name in our Datacenter, please give me PowerCLI Script to move exactly.

  I tried to use for the function FolderByPath below, but don't know how to use it and have worked. Please help me in this.

  Function Get-FolderByPath {}

  < #.

  . Records of recovery SYNOPSIS by giving a path

  . DESCRIPTION the function will retrieve a record by its

  path. The path can contain any type of leave (folder or)

  Data Center).

  . Author NOTES: Luc relaxing

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . Path PARAMETER

  The path to the folder.

  This is a required parameter.

  . PARAMETER separator

  The character used to separate the leaves in the

  path. The default value is ' / '.

  . EXAMPLE OF

  PS > Get-FolderByPath-path ' Datacenter/Folder1/Folder2 ".

  . EXAMPLE OF

  PS > Get-FolderByPath-path "Folder1 > Folder2"-separator ' > '

  # >

  (param

  [CmdletBinding()]

  [parameter (Mandatory = $true)]

  [System.String []] ${Path}.

  [tank] ${delimiter} = ' / '.

  )

  {in process

  If (((Get-PowerCLIConfiguration).)) DefaultVIServerMode - eq "Multiple") {}

  $vcs = $defaultVIServers

  }

  else {}

  $vcs = $defaultVIServers [0]

  }

  {foreach ($vc to $vcs)

  {foreach ($strPath in $Path)

  $root = get-file-name of the server data $vc centers

  $strPath.Split ($Separator) | %{

  $root = get-inventory-name $_-location $root - server $vc - NoRecursion

  If ((Get-stocks-localisation $root-NoRecursion |)) Select--ExpandProperty name)-contains "vm") {}

  $root = get-inventory-name "vm" - location $root - server $vc - NoRecursion

  }

  }

  $root | where {$_-is [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl]}|% {}}

  Get-file-name $_. Name - location $root. Parent - Server $vc

  }

  }

  }

  }

  }

  You can try to retrieve the object file by steps as well.

  Something like this for example

  $folder = get-data center-name 'LTX01-G8 | Get-file-name "LTX-servers | Get-file-name "LTX servers 0000 - 0299. Get-file-name Linux

  I guess the first qualification in your path was the data center.

• Add the short name field for specifications in the XSL file

  Hello

  I'm looking for help to see if it is possible to add the short name for the inputs and spare field in a specification of Formulation in the XSL file. If it is possible, how can I do this?

  Thanks in advance.

  Well, CSS is much more locked, by design. So it's a little (or maybe a lot) more complicated.

  Also remember that if you change the CSS schema, and you use the web service contract that we provide for the CSS message, then the approach will probably be different. This means that the web service contract would not support additional XML nodes, unless he expects them.

  If you do not use our web service contract, then you could make changes in the XML in a different way. Can you elaborate on how you receive the message in CSS?

  Basically, if you use the web service method, then you will probably need to use the ExportExtensions method, which is documented in the CSS guide. ExportExtensions allows you to include xml code in a node specific extensibility through managers, which are classes that you configure in the config\extensions\exportExtensions.xml configuration file. It is currently the custom how sections are included in syndication. So you can add your own XML nodes and call you a custom class to provide additional data that you need.

• Client Windows 7 Professional DNS fails to resolve the name - when connectin to a Windows Server 2003

  A professional Windows 7 workstation is unable to resolve the name when connecting to a Windows Server 2003 server.

  I ran the Portqry tool and discovered a problem with the Port 53 and open this Port in the Windows Firewall on the client and Windows Server 2003.  However, it may not always resolve the name and I can't get the Windows 7 workstation to join the domain.

  Our DNS server is at the ISP, but enabled DNS on Windows Server 2003.  I can ping the IP address of the server from the Windows 7 client

  nslookup is solved using the FULL domain name.

  Any ideas on other settings, I need change and port that I need to open to allow?

  Thank you.

  To help with this problem, please go to the TechNet Windows Server forums .  They can help you better than we can in the Windows Vista forum. Boulder computer Maven
  Most Microsoft Valuable Professional

• Vista fails to resolve the name of Server 2003 on a domain

  I have several computers and two servers configured as a domain.

  Server1 - Server 2008: domain controller, print server

  Server2 - Server 2003: Server terminal server, file server

  V1 - V10 - Vista desktop computers

  Recently an office has been infected with a virus. I clean with AVG Live CD and then with Avira. At the moment, it seems that the virus has disappeared completely.

  As meeting the office in question cannot resolve the name NetBIOS of Server2, but find other machines on the network very well. I placed the entries in the file hosts and lmhosts with no effect. Connection via the address IP of Server2 works well though, so it doesn't seem to be a permission problem.

  We know troubleshooting step by step for such a question?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  They will help you in the above Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to resolve the computer names of task force

  My Windows Vista laptop only shows itself as visible in the 'file' network and is unable to connect to other computers manually by typing the name (\\computer-name). My Windows 7 and XP workstations can view each other and the Vista laptop except they can't connect to the laptop (network in inaccessible resource).  All 3 are in the same workgroup and I tried to connect without a firewall as well.  The strange thing is when I try to ping other computers from the laptop, the "host is unreachable" if I ping the computer name, but very good pings if I ping to the IP address. If after the ping of the IP address, I ping the hostname again it pings fine. After that Windows 7, the computer icon visible and accessible and the XP machine is manually (but no icon) for a short period of time. After 5-10 minutes or I stop/standby host names can be resolved again and I have to start with ping them.

  I have no idea why, but I've uninstalled and reinstalled the network card driver and it fixed the problem.