HP Pavilion: Nothing but problems in the months since I changed to win 10

Similar Questions

• Nothing but problems & at the end of my tether

  I bought this DV7T-7000 it not so long ago and had any other problems with it.

  She kept in and finally started to freeze. I thought it was the hard drive, but he came to find out later that the Nvidia card had problems (error 43). I have fixed a lot of computers in the past I did the usual stuff like reinstall the drivers, reinstall the OS, hard drive test, tests of memory, etc..

  I called a representitive of support who had me send the computer in the system board replacement.

  It took 12 days to get my computer back, then 6-8 hours after it was up & running the card crashed again. Back to the hotline, where the guy has me press the Windows key & key 'b '. He said it was to roll back the bios. He had heard this same issue.

  It worked - for about 6-8 hours. Then the map is broken once AGAIN.

  Back to telephone support. After checking all my info still ONCE he uninstall & reinstall the drivers, although I told him that I had already done. Whatever, I her mood. Of course, it did not work, and he has essentially silent and apologies just at this moment. He did suggest reinstalling the OS AGAIN to see if that helped. I thanked him and we went our merry way.

  Get frustrated at how the laptop worked, I decided I just go ahead and wipe it once AGAIN to see if there is nothing. (I deleted this thing several times now & spent hours to reinstall programs - it gets very old)

  So I expect the process of re-Setup finish and when Windows begins to start I get a blue screen. It is said that my bios version is not compatible. Now, I have no laptop to use at all.

  Call HP Support AGAIN, go through 5 minutes of verification of information, say what is happening - and she asked me to sit on the phone with her, while AGAIN performing a test drive a wide, and then a memory test AGAIN.

  All this for an incompatible BIOS - probably because of the price drop I did previously? If it has already been selected several times?

  I'm about to lose my mind. I don't seem to be getting anywhere, and I really need this phone to work. I create Web sites. I can't keep reformatting & do all these stupid human things day in and day out, just to send the same computer back repeatedly for the same exact problem?

  What on earth am I doing here? I even bought a 3 years Care Pack with the ACP countries, and I'm still without a computer.

  I literally see go me through that for the next 3 years. Not exactly what I spent all that money for.

  Is it possible to work around all the time to lose so I can have a working computer, or I am doomed now?

  Merry Christmas. (as if)

  Thank you. I'll keep an eye out for it.

• Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and h

  Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and how I can do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  I try to install my Adobe Acrobat 9 on a newly purchased computer, but getting the message that my serial No. is not valid. I faced the problem of the last time I changed my PC, but Adobe offers support.

  Acrobat 9 is not compatible with the current operating system, which is probably the reason why they don't support you, but they still let you know if your s/n is valid or not... Try to contact them again and ask for this information.

• I have a Mac. My creative cloud will not update. Whenever I try to open photoshop its immediately blocked. Then the update appears and freezes.  I had the problem concerns the month

  I have a Mac. My creative cloud will not update. Whenever I try to open photoshop its immediately blocked. Then the update appears and freezes.  I had the problem concerns the month.

  Hello

  Please remove Creative Cloud app and Adobe Application manager using the-

  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• Cannot remove Thunderbird mail all mail or the treaties since I changed my password for googlemail. Can't remove it from the Inbox and sent mail

  I recently changed my googlemail password and saved a nine on Thunderbird. However, when I try to delete mail messages or my project all the files they reappear again and I have to go in googlemail to remove. I can delete in the Inbox and sent folders (even if I was prompted to enter the password for each of them at the start, but I have received no invitation for projects and all messages. I don't want to change the settings regarding where these messages are stored.

  I thank very you much for your useful replies. I checked all the settings and they were as you described. Removal of all mail is not important and can be done, if necessary, from Gmail. I have overcome the problem of the drafts folder by changing the destination folder in the drafts IMAP that allows me to remove both Thunderbird and Gmail at the same time, which is what I needed. However, I still do not understand why change my Gmail password should have caused the problem in the first place!

• Nothing but problems, now "failed to resolve the short name.

  I've implemented 2 esx servers and a vcserver... I can solve all the names on my vcserver very well. Both ESX servers are pointed to the DNS server and yet they cannot solve the other since the service console.  Should not be able to?  AND I can not activate HA because I get the error in the screenshot.  What I am doing wrong?  Do I have to have a file host also?  If so how can I get that?

  In each respective SC follow these steps

  cat /etc/resolv.conf on the two SC (output should be the same)

  # hostname (the result should be the domain your ESX host's FULL name)

  dig @x.x.x.x whatever.localdomain.com (where x.x.x.x is the IP address of your primary DNS server, if the request fails check UDP 53 ESX host access to the DNS server, or that the file is OK)

• Pavilion DV6-6B26US completely crashed the month after warranty

  The month after my warranty was up (January 2013) my laptop started getting blue screens that would freeze the laptop.  He has never published a journal of the accident.  I ran the recovery disk and restored to factory condition.  He worked for a few weeks then happens again.  I've tried everything.  Test drive are good after restoring to factory State, but after a blue screen, I can no longer run test.  I have restored at least 4 times.  Now my laptop is not working even in safe mode, and it will not work the recovery.  I read to try to install windows 7 from a windows disk, but that will not work without the driver for the hard disk, that I can't go anywhere.  With all the problems that I have just read on this laptop, why HP does not solve this or making it right?  I have a Toshiba laptop which has worked for 7 years. (touch wood)

  Anyway, if someone has a miracle in difficulty who does not buy a new one or pay for technical repairs, please let me know.

  Here's my info:

  HP Pavilion dv6-6b26us

  Windows 7

  Buy Jan 2012

  Seagate hard drive / model ST9750420AS / pilot was 6.1.7600.16385 / firmware 0003HPMi / series[personal information deleted]

  Thank you

  I had to replace the hard drive for this problem.

  Thanks for trying to help.

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Pavilion 15-n234sl: problem with the installation of the driver WIFI RTL8188EE

  Hello world.

  I encounter some problem with my wireless card since the new driver is available via windows update.

  The installation seems to be ok, but after that the card no longer works.

  The key of the keyboard wifi light. lit red guard if it is set to the aero mode.

  The card works fine in rolling back to a previous system configuration, it goes back to work, until the new driver is installed again.

  Any who have experienced the same problem or does anyone have a solution?

  Can someone tell me the other compatible wifi cards in case of substitution?

  Thank you very much and sorry if my English is not perfect!

  Ste

  Hello:

  Please read my recommendation about what to do on the link below...

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-RTL8723BE-update-fails-cuts-off-WiFi/m-p/5275224#M102368

• Oracle BI import cube Essbase (problem on the month)

  I have a cube Essbase with a time Dimension (TIME).
  I imported this cube in Oracle BI and now I see in the answers of several dimensions, under the TIME I see Gen1, Gen2, Gen3. Now, I'm interested Gen3, Essbase is the generation of the months, but if I use this gen in Oracle BI report the month are listed in alphabetical order and not in chronological order.
  
  Is there a way to change the order?
  
  Thank you.

  Yes, you need to restore the sort order of the outline of the cube.

  Create a new logical column in the TIME table and assign it as the column sort order to the Gen3, TIME column. It's the formula to EVALUATE:

  Evaluate('RANK(%1.dimension. CurrentMember,%2.Members)' AS INTEGER, 'YourEssbaseServer '. "" "" YourApplication'."" ». "" Autogrow ". "" Gen3, TIME ', 'YourEssbaseServer '. "" "" YourApplication'."" ». "" Autogrow ". ("" Gen3, TIME ")

  See you soon,.
  C.

• Problem with the PXI-6534 elimination change detection task

  I ran into the following problem.  I use a PXI-6534 and PXI-6602 with vb.net for detection with a timestamp of changes.  My code works fine and I get data exactly as I want, the problem comes when I try to call the task.dispose function.

  When I call him has, she throws an exception with error-200088 code, task does not exist.  But the task is still stopped and I can run my code again and everything works fine.  If I do not call the task.dispose, I get an error when I try to run my code again.  The material seems to have left in an unknown state, and I have to restart my computer to get it back. (the MAX NOR even reset the 6602, he says only that the Council does not exist).

  Interesting also is the exception thrown does not seem to be caught by the Try Catch method.  The code traverses the Try Catch without any problem (step by step in the code anyway), but with the exception, the message box appears, either immediately or when coming out of the subroutine.

  Also, I use TestStand 4.2 to call these functions, if that makes a difference.

  Any help would be greatly appreciated!  Its very frustrating that everything works and I get my data perfectly, but I can't run the code without exception popping up, and I can't seem to catch the exception.

  Here is the code I use:

      Public Sub StartChangeDetect_UUT1()
          If myCDrunningTaskA Is Nothing Then
              Try
                  ' Create the task
                  uut1ChangeDetectTask = New Task()
  
                  '************************ Create the digital input virtual channel alias
                  'Assign ports to digital virtual channel
                  uut1ChangeDetectTask.DIChannels.CreateChannel("Dev1/port0:3", "ChangeDetectUUT1", ChannelLineGrouping.OneChannelForAllLines)
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterEnable = True
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterMinimumPulseWidth = 0.000001
                  uut1ChangeDetectTask.DIChannels.All.InvertLines = True
                  uut1ChangeDetectTask.DIChannels.All.DataTransferMechanism = DIDataTransferMechanism.Dma
  
                  'Assign ports to monitor for change detection, both rising and falling edges
                  Dim rising As String
                  Dim falling As String
  
                  rising = "Dev1/port0:3"
                  falling = "Dev1/port0:3"
                  uut1ChangeDetectTask.Timing.ConfigureChangeDetection(rising, falling, SampleQuantityMode.ContinuousSamples, 4000000)
  
                  'export change detect event to PXI backplane so we can get timestamps from timer.
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventOutputTerminal = "/Dev1/PXI_Trig0"
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventPulsePolarity = ChangeDetectionEventPulsePolarity.ActiveHigh
  
                  'uut1ChangeDetectTask.Stream.Timeout = 20000
  
                  ' Verify the Task
                  uut1ChangeDetectTask.Control(TaskAction.Verify)
  
                  ' Set up the data table
                  Initializeuut1DataTable()
  
                  ' Create the readers for the DI and the CI
                  uut1ChangeDetectReader = New DigitalSingleChannelReader(uut1ChangeDetectTask.Stream)
  
                  uut1CDCallback = New AsyncCallback(AddressOf uut1ChangeDetectCallback)
                  uut1ChangeDetectReader.SynchronizeCallbacks = False
                  ' Set up our first callback
  
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
                  myCDrunningTaskA = uut1ChangeDetectTask
  
                  'Set up Timer for time stamp
  
                  uut1TimeStampTask = New Task()
                  '****************set up PXI-6602 timer to get buffered change events.  ie capture timer output on  the PXI_Trig0
                  'we can then correlate this timer capture buffer to the change detect buffer to get the time stamps
  
                  uut1TimeStampTask.CIChannels.CreatePeriodChannel("Dev5/ctr0", "TimeStamp1", 0.0000001, 0.02, CIPeriodStartingEdge.Rising _
                               , CIPeriodMeasurementMethod.LowFrequencyOneCounter, 4, 4, CIPeriodUnits.Seconds)
                  uut1TimeStampTask.CIChannels.All.CounterTimebaseRate = 20000000.0
  
                  'Use exported change detect from 6534 board to take counter sample
                  uut1TimeStampTask.Timing.ConfigureImplicit(SampleQuantityMode.ContinuousSamples)
                  uut1TimeStampTask.CIChannels.All.PeriodTerminal = "/Dev5/PXI_trig0"
                  'uut1TimeStampTask.CIChannels.All.DuplicateCountPrevention = False
                  uut1TimeStampTask.CIChannels.All.DataTransferMechanism = CIDataTransferMechanism.Dma
  
                  ' Set timeout
                  'uut1TimeStampTask.Stream.Timeout = 20000
                  ' Verify the Task
                  uut1TimeStampTask.Control(TaskAction.Verify)
                  uut1TimeStampReader = New CounterReader(uut1TimeStampTask.Stream)
                  uut1TSCallback = New AsyncCallback(AddressOf uut1TimeStampCallback)
  
                  uut1TimeStampReader.SynchronizeCallbacks = False
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampTask)
                  myTSrunningTaskA = uut1TimeStampTask
  
              Catch exception As DaqException
                  ' Display Errors
                  MessageBox.Show(exception.Message)
                  uut1StopChangeDetection("C:\PT3771\TestResults\")
              End Try
          End If
      End Sub
  
      Private Sub uut1ChangeDetectCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myCDrunningTaskA Is uut1ChangeDetectTask Then
                  ' Read the available data from the channels
                  Dim data As UInt32() = uut1ChangeDetectReader.EndReadMultiSamplePortUInt32(result)
  
                  Dim b As UInt32
                  For Each b In data
                      ' in TestData waveform Y axix is data, x axis is time 
  
                      uut1TestData.SetY(uut1ChangeDataIndex, b)
                      uut1ChangeDataIndex += 1
  
                  Next b
  
                  '' Set up a new callback
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'DigitalCallback
  
      Private Sub uut1TimeStampCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myTSrunningTaskA Is uut1TimeStampTask Then
                  ' Read the available data from the channels
                  Dim data2 As Double() = uut1TimeStampReader.EndReadMultiSampleDouble(result)
  
                  ' in TestData waveform Y axix is data, x axis is time
                  Dim b As Double
                  For Each b In data2
                      uut1TimeSum = uut1TimeSum + b
                      uut1TestData.SetX(uut1TimeStampIndex, uut1TimeSum)
                      uut1TimeStampIndex += 1
                  Next b
  
                  ' Set up a new callback
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampReader)
  
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'CounterCallback
  
      Public Sub uut1StopChangeDetection(ByVal location As String)
  
          Try
              If Not (myTSrunningTaskA Is Nothing) Then
                  uut1TimeStampTask.Dispose()
                  myTSrunningTaskA = Nothing
  
              End If
  
              If Not (myCDrunningTaskA Is Nothing) Then
                  uut1ChangeDetectTask.Dispose()
                  myCDrunningTaskA = Nothing
  
              End If
          Catch ex As Exception
              MessageBox.Show(ex.Message)
          End Try
  
          uut1TestData.UpdatePointCount()
          uut1TestData.SaveToDisk("C:\PT3771\TestResults\uut1TestWaveFile.csv")
          uut1TestData.SaveToDiskBinary("C:\PT3771\TestResults\uut1TestWaveFile")
      End Sub 'StopTask
  

  Joe,

  Last updated.  It seems that when the task.dispose is run, recalls seem to have called one last time.  I took the call to the stopUUT1ChangeDetect in the two recalls (so eliminate it would not enforce a second time), and no exception was thrown.

  Thanks for your help!  Although if you'd still answer my question on the PXI-6534 Digital input filtering, I'd appreciate it.

  Thanks again.

  Thad

• Developer SQL 2.1: problem with the dialog box to change the display

  I am running Version 2.1.0.63 on Windows XP SP3.
  
  When I open an existing view and make changes in the change display dialog box and then click on the button OK the dialog box remains open and the view is not changed.
  
  This user has Create View privileges and can run CREATE or REPLACE the sql statement to change the view. The same view of edition having the same user works very well in Version 1.5.3.
  
  Someone else has a similar problem?
  
  Thank you.

  It's a bug, the following exception is raised:

  Exception occurred during event dispatching:
  oracle.javatools.db.ddl.UnsupportedDDLException: Cannot update VIEW MADREMIA with the given changes using ALTER statements.
          at oracle.javatools.db.ddl.DDLGeneratorImpl.getUpdateDDLImpl(DDLGeneratorImpl.java:480)
          at oracle.javatools.db.ddl.AbstractDDLGenerator.processResultSet(AbstractDDLGenerator.java:148)
          at oracle.javatools.db.ddl.AbstractDDLGenerator.getUpdateDDL(AbstractDDLGenerator.java:110)
          at oracle.javatools.db.ddl.DDLDatabase.appendUpdateDDL(DDLDatabase.java:661)
          at oracle.javatools.db.ddl.DDLDatabase.updateObjects(DDLDatabase.java:556)
          at oracle.ide.db.dialogs.CascadeConfirmDialog.updateObjects(CascadeConfirmDialog.java:111)
          at oracle.ide.db.panels.TabbedEditorPanel.commitToProvider(TabbedEditorPanel.java:357)
          at oracle.ide.db.panels.TabbedEditorPanel.onExit(TabbedEditorPanel.java:246)
          at oracle.ideimpl.db.panels.TraversableProxy.onExit(TraversableProxy.java:62)
          at oracle.ide.panels.TDialog$L.vetoableChange(TDialog.java:104)
          at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:335)
          at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:252)
          at oracle.bali.ewt.dialog.JEWTDialog.fireVetoableChange(JEWTDialog.java:1472)
          at oracle.bali.ewt.dialog.JEWTDialog.dismissDialog(JEWTDialog.java:1502)
          at oracle.bali.ewt.dialog.JEWTDialog$UIListener.actionPerformed(JEWTDialog.java:1894)
          at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
          at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
          at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
          at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
          at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
          at java.awt.Component.processMouseEvent(Component.java:6263)
          at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
          at java.awt.Component.processEvent(Component.java:6028)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
          at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
          at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
          at java.awt.Container.dispatchEventImpl(Container.java:2085)
          at java.awt.Window.dispatchEventImpl(Window.java:2475)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
          at java.awt.Dialog$1.run(Dialog.java:1045)
          at java.awt.Dialog$3.run(Dialog.java:1097)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.awt.Dialog.show(Dialog.java:1095)
          at java.awt.Component.show(Component.java:1563)
          at java.awt.Component.setVisible(Component.java:1515)
          at java.awt.Window.setVisible(Window.java:841)
          at java.awt.Dialog.setVisible(Dialog.java:985)
          at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
          at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
          at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
          at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:225)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.launchDialog(BaseDBEditorFactory.java:623)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:368)
          at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:332)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:54)
          at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:314)
          at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.editObject(DatabaseNavigatorController.java:470)
          at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.handleEvent(DatabaseNavigatorController.java:308)
          at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
          at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
          at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
          at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
          at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
          at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
          at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
          at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
          at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
          at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
          at java.awt.Component.processMouseEvent(Component.java:6263)
          at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
          at java.awt.Component.processEvent(Component.java:6028)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
          at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
          at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
          at java.awt.Container.dispatchEventImpl(Container.java:2085)
          at java.awt.Window.dispatchEventImpl(Window.java:2475)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
          at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  

  Bug 9199263 has been filed for this, but apparently it wasn't a showstopper for the production. It may be set in one of the upcoming patches...

  Kind regards
  K.