Nothing happens when I power the Satellite P100-286 upward

Similar Questions

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• HP photosmart-nothing happens when I hit the icon

  I installed HP photosmart and it worked fine for a while... now when I click the icon, nothing happens - it indicates that it is not compatible.

  Hi Robbie,

  You may need to update the drivers.  Please see the following link for the HP website for your printer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=3192751&prodTypeId=18972

  I hope this helps!

• (Flash and reader) Download Manager window is empty. Nothing happens when I install the applications.

  I downloaded the latest versions of Flash and Reader. When I run the Setup file of the Download Manager window appears, but nothing happens. It just hangs, I checked the system specifications, and it seems that I am in the specification. I am using windows 7 Home premium.

  Do a clean install

• Link to problems in Outlook Express, nothing happens when you select the

  I have in recent weeks put links to access the problems in outlook express. I received an email with a link to a web site, I click on the link, but nothing happens, I try again and still nothing works, until the link to connect directly on the page, but now it does not work.

  Someone at - it ideas?

  Thanks for your reply.
  I tried everything in this thread.
  I don't use IE as a matter of personal choice.
  In the many years I have used Outlook Express and Firefox, I have NEVER experienced this problem until today.
  I met Microsoft difficulty It Center.
  I think I must have clicked something on this site (unintentionally and coincidentally, I'm sure).
  Anyway. hypertext links seem to work now.

• Help! Nothing happens when I insert the Windows Vista CD.

  I am trying to install the new printer with the closed disc and nothing happens, even with any CD my old windows 98 appears a little 'player' on the desktop.  absolutely nothing happens with Vista.  How you turn it on, or what I can do?  Thank you!

  Click the start orb (windows logo), select 'computer' drive select xxxxxx (E :). You will now be able to do what you want to do with the disc.
  I hope this helps.

• Install Adobe Flash Player, but nothing happens when I reboot the computer

  Hello!

  I can't get adobe flash player to work. My computer is a macbook release 10.9.5 and he said successful install but when I restart my browser and go to some Internet sites it still does not work? I closed all my browsers, open and installed adobe, restarted my browser and nothing happens. I am downloading from Adobe Flash Player 19

  Thank you!

  If it's Safari, it might help:

  Activate for Safari

• DVD/CD-RW a Read/Write-Error to the Satellite P100-286

  My optical drive does not read the entire disc. The optical drive is defective or if a software update is needed?
  Also when you make a backup on a rewritable dvd, backup was not complete. I don't know if the laser head moves
  the entire width of the disc.

  MY

  You can install OS using manage recovery media? ODD reads DVD recovery correctly?

  Your laptop factory settings or you use your own operating system?

• I bought an upgrade from lightroom 5 to 6 (not cc) and when I try to update to get the latest patch for my camera (fujifilm t10) I am installer of clouds taken on creative and lightroom 6 cc and inviting me to open. nothing happens when I click on for the

  I bought an upgrade from lightroom 5 to 6 (not cc) and when I try to update to get the latest patch for my camera (fujifilm t10) I am installer of clouds taken on creative and lightroom 6 cc and inviting me to open. nothing happens when I click the icon. I had already downloaded a demo for creative cloud but decided against the purchase of this

  Hi artprints.

  You can install the update from Lightroom 6 from this link: keeping up-to-date for Lightroom

• nothing happens when I press space

  I just downloaded Audition CC 2014, I used to have the version installed.  I'm trying to start, but after having imported a wav file, I find that nothing happens when I press the SPACEBAR to start playback.  What could be the problem?

  I had the same problem. I found the sollution. Ti go to Edit/Preferences/Audio Hardware and change the sampling frequency. My has been set at 44000hz and it did not work, I changed it to 48000 Hz and the problem was solved!

• How to get 5.1 sound on Satellite P100-286

  I had to replace my old P100-347 of 2 months, because of cracks on the hinge. The only model they had available was the P100-286. It is almost identical, except one thing, that I was not informed until I got it home and so too late to resume.

  Basically, the P100-347 had a SPDIF port and the 286 (as far as I can see), does not work. So, what I want to know is, what kind of sound that I am able to get the decision-making helmet.

  I plugged my Dolby Digital amp, and everything seems to be able to get is 2 audio channels, when I would be able to get 5.1 channels... In fact, I would like to have SPDIF, but don't think it will happen.

  Can someone advise and give me some advice on solving this.

  Thanks in advance
  Steve

  On the Satellite P100-286 S/PDIF port is not available and if you want to have 5.1 surround sound you need to use an external solution connected to the USB port. Google around. You will find quite different products, that you can use with your laptop.

• HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press

  Hello

  I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

  The laptop is a little new: I use only 2 months.

  1. number and product name

  HP EliteBook 8560p
  НР LQ589AW

  2 operating system installed (if applicable)

  Windows 7 Professional 64 bit

  3. error message (if any)

  No error message

  4. all changes made to your system until the problem occurred

  My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

  Additional details:

  In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

  I already tried things:

  1. Reinstalled all the HP drivers from original CD.
  2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
  3. Checked the mobility Center as suggested in one of the threads available on this forum;
  4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

  Thanks for any help!

  Anatoliy.

  I managed to solve the problem...

  Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

  I hope this helps.

• Buttons on the dialog and prompt boxes are empty and nothing happens when I click on them.

  Whenever a dialog box or a dialog box appears, all the buttons, or sometimes just the low two (OK and cancel) are empty and nothing happens when I click on them, with the exception of a Web site in which clicking on the white button who normally says 'OK' takes me to a white screen. This does not allow me to access some sites or Web download anything when a dialog box asks me to confirm. So, I also can't start firefox in safe mode or refresh.

  An example is attached. This is what came up when I tried to update to firefox. Nothing happens when I click on one of the buttons at the bottom.

  EDIT: Attached the image.

  Hmm. could be a corrupted file was the cause, and it replaced.
  As long as the problem disappeared.

  Please mark your last post as solved so other will know.

  If the problem will reappear, ask a new question.

  Surf safely.

• I'm trying to set up the synchronization... pair a device and menu on home computer says sync now, but nothing happens when I press it. I have not yet entered code

  Cannot set synchronization because when I try to enter the code on the main computer to pair a device menu firefox Sync now displays but nothing happens when I click on this

  Maybe the button is hidden somewhere, please create a screenshot of the problem you see by following the guide mentioned in the How to make a screenshot of my problem?.

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . You really help us to visualize the problem.

• Photobucket uploader requires login (never before) NOTHING happens when I click on connection, no place to connect?

  Just today photobucket uploader has stopped working. Working for years! I've upgraded to Firefox 20 yesterday... but worked to the uploader.

  I tried to reinstall Firefox 20 then back to firefox 19... does not help.

  I hit some sort of thing clear firefox and makes... the photobucket uploader... reinstalled but still have the same problem
  I erased all the browser history... a few times.

  Right click and image gives "connect to upload" by clicking on that does nothing... no connection window with... nothing. In the same way in tools/photobucket uploader I see connection option... Nothing happens when I click on that.
  I've NEVER seen a login before uploader... a fortiori connected?

  I run a forum and use photo upload many many times a day... I need.

  Here's the reason.

  http://support.Photobucket.com/entries/21508269-Firefox-Photobucket-Uploader-extension-issues-4-3-2013-

  For reasons beyond our control, the Firefox Photobucket Uploader extension will be is no longer work. The Firefox Photobucket Uploader is a third-party application, which means that it is not a tool that Photobucket created. We made various code updates, we do not maintain this tool and therefore cannot be updated.

  What you want to do, use the upload URL instead of the extension. Below are the steps to download via a URL.

  Jinx