noticed the same problem, my friend had 2 months in hardware of the iphone 6!

Similar Questions

• failure of migration on wifi. error message. programs do not work. anyone else having the same problems?

  failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.

  Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.

• 2nd AppleTv same problem...

  OK gang, so wife buy me an AppleTV for our anniversary 06/06/16

  Yesterday, I'll install (28/06/16) and it connects to my wifi, says that my wifi is not connected to the Internet.

  The * you say... so... I try again, and this time keeps spinning, spinning and spinning, on a gray background.

  The only thing I could think to do was unplug HDMI and power for a full five minutes. When I go to plug it back in I get nothing

  but a black screen, which is a way to say no TV signal. (since it actually says). It recognizes that there is something connected (if not, I would get a message of control cables)

  .... I call support ran through all of the options we could think of:

  1: a different HDMI - no difference cable

  2: different TV - no difference

  3: resolution to jump (via menu/flight down - no difference

  Long story short, support guy says he's going to the document as being faulty out of area, and I could be ship mine for them and they would send me a new, or I could travel on the road

  my closest Apple Store (over an hour's drive) and make an Exchange. I chose the latter, and all went well... until I got home.

  EXACTLY same problem as I had yesterday. Identical.

  I could really use some advice here, because really, the only option open to me is definitely send it back (I know that's outside the window of 15 days return, they work with you plan to DOA product, said the Advisor), OR try my luck on a 3rd unit.

  It is technically possible to get 2 DOAs in a row, but not likely.

  So, any advice/thoughts/inputs, greatly appreciated.

  Thank you

  Bill

  PS I am not a MAC, so no cable USB - C to try iTunes fix.

  You have enabled access control on your router? You may need to allow the new device.

  You can restore it, if necessary, on a Windows computer with the installed iTunes program.

• I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  ShapiroPE wrote:

  I could not make a backup encrypted today, because I don't remember my old password. There is no option to use a new password or reset a password if you forgot it. Have you had the same problem?

  No I don't have this problem.

  If you do not know your iTunes backup encryption, then you won't be able to use it.

• Virus scan Avira would stop working and freeze the computer whenever an analysis was carried out. Tried to uninstall and reinstall, but still had the same problem. Impossible to uninstall now due CCPLG. XML error.

  Hello, I have been using Avira anti-virus on my computer for the past two years with no problems.  I run a scan on my computer every day and noticed problems with it a few days ago.  The analysis would be about 21% when he would stop scanning and freeze my computer.  The RAM would be also be maxed out at 100%, and I need to restart the computer manually.  When I ran the scan in safe mode, it worked fine, but then continued to not work when the computer is not in safe mode.  I would also get a security alert Windows telling me that Windows did not antivirus software on this computer.  I tried to do a system restore which goes back to the day before the problem started to happen with the scan, but I still have the same problem.  I tried to uninstall the program again, but I get the message: Setup could not determine feature control file, or was not able to read it properly the. I also received a message about CCPLG. XML. I don't know what to do at this point or what was wrong in the first place with my antivurus software, but I feel that I continue to do worse with everything I want to do about it.  If you can offer any help with this problem, it would be much appreciated.  I have to go to work now, so I'll check tomorrow and hope that someone decided to go back to me.  Thank you.

  There are similar problems listed in the Forums of Avira.

  Have a read of the info in them; who can help you:

  http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=77368

  http://Forum.Avira.de/WBB/index.php?page=thread&PostID=729964

  Both above the Avira Forum entries have the same problem, CCPLG. XML, like you with solutions provided.

  http://www.Avira.com/en/support/kbdetails.php?ID=135

  Avira has also a manual uninstall. read the link above.
  Try this: uninstall/reinstall Avira as it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:http://www.avira.com/en/support/

  Contact the Avira Support on this problem with their anti-virus software.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also, try asking the security of Vista and the Privacy Forum.

  They know a little about the Avira software there.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  See you soon.

  Mick Murphy - Microsoft partner

• delivery of mail with 5510 e error - print. updates and connection are ok. a friend has the same problem.

  I checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and everything is good.  But I still have the error of mail delivery when e-printing.  And my friend has the same problem with his new b111a 5510.  What could be the problem?  Regular, printing, scanning, and so on work fine with my wireless connection.

  So looks like it's maybe a problem with the E-mail address provided by your internet provider, you send from,

  What I would say as a test is to create an email account with g mail and or yahoo and try to send the e-mail to your eprint/E-mail account and see if it accepts the email too, make sure you have your printer the value Accept e-mail for all users, you can do so by logging into Eprint Center and then enter these parameters and select this option

• Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Not compatible with the system after XP. Upgrade.

• I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  I have recently updated my laptop to Windows 10 and can now access Lightroom, I had the same problem before, when I upgraded and you were able to walk through the changes, can advise you?

  It seems that there is a problem with the graphics card.

  Please try the step under the troubleshooting topic: Adobe Lightroom GPU troubleshooting and FAQ

• I need to cancel the order that I did yesterday (11054908559) but it doesn't there is no Cancel option on the Brazilian from ADOBE site, if someone had the same problem I had, please help me, I tried to get on the phone, but no one answered the phone ca

  I need to cancel the order that I did yesterday (11054908559) but it doesn't there is no undo option on the Brazilian Adobe site, if someone had the same problem I had, please don't help me, I tried to get them on the phone, but no one answered phone calls, I m very angry, when we want to buy it is easy When we need to cancel it s very badly and information not clearly. Sorry to bother you with this topic.

  Cancel your membership creative cloud

• LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES

  Check your hosts file.  to help with this and more:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before

  Resettlement CS5 troubleshooting my PC had problems, so I had to upgrade to windows 8.  during installation, I received a response that my serial number was not valid.  It's the same serial number that I received from my initial order.  I disabled before the upgrade to windows 8

  Contact by web chat support.

  Mylenium

• When searching the Web, I don't have an arrow towards the front or the back on my toolbar. As I understand it a friend, who also has Mozilla/firefox, has the same problem. He said that it is available on older versions?

  I was wondering if I deleted Mozilla and download again, if it can clear my problem? or should I still the same problem? It is difficult for me to believe that your program would not have this feature.
  what appears on my toolbar is
  File... Edit... History... Bookmarks... Tools... Help
  Search web search -Xfinity.com (this page)
  Protect the Xfinity (search), IM, e-mail, voicemail, constant messaging, XF channels, videos, free games, weather

  In fact, Firefox includes the buttons next and previous. Looks like you must turn on the Navigation bar. Select view-> toolbars-> Navigation toolbar.

• Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and told me that I had to upgrade.

  Why Lightroom CC will not download Nikon D610 photos, the same problem, I got with lightroom 3 and said to upgrade?

  Make sure you sort the display you are looking at instead of file name recording time. It is in the context menu with a small sign of a to z just below images. Make sure also that you have no active filters.

• Can anyone help. Since I've upgraded to iOS 9.2 earlier this week, the battery on my iPad began draining at an alarming rate, compared to previously. Anyone experienced the same problem and, if so, found a solution? Thank you very much.

  Recently upgraded to iOS 9.2 and immediately noticed that my iPad now battery very quickly compared to before the update.

  Has anyone had the same problem and, if so, identified the solution?

  Thank you very much

  Paul

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

• S271HL - demand guarantee, she needed no repair - I'm back with the same problem

  Earlier, I sent a S271HL monitor for repair under warranty.  The issue was that the screen would not activate and the only thing that happened was an orange power flashing instead of a constant blue button button.  The problem is that I got, with the same problem that I sent him.

  I am the home monitor today.  The first two pages of order of service, under the description of the problem, I see:

  said c:CX dsnt unit turn on, only a power light flashes

  a: do you have a self test, no go, so informed the cs repair, cx agreed

  r: at the request of the unit for repair

  On the second page, I see this:

  Computer data. Accessories
  No accessories (No. Box)

  Software & other remarks:
  surface scratches, no power

  (Note to this poster: surface scratches?)  Where?  I treated this monitor as it was made of Crystal.)

  Diagnosis / repair:

  Reported problem not noted.  Monitor power towards the top with good screen, stable.  Monitor adopted system intensive burnin test over the weekend, more than 63 hours, without any problem.  At the end of the extensive, intensive, powered burnin test monitor then turn it several times; always under tension with a display of good and stable, no problems noted.  In the course of trials, powered monitor then turn it several times; always constantly lit with a good and stable display.

  ===============

  So, my friend has a supply for his Acer monitor (a smaller one) that has 19v and 2. 1 has, just like mine.  So I borrowed her power to test my monitor and I had the same problem: an orange power button flashing.

  So the question is: has anyone ever encountered this with Acer?  I'll call them, but I wanted to see if there was any opinions here at the same time.

  It seems that this has not worked for the first tester and launched up to more away for another tech fix, but when that tech he walks, it worked fine. I have been a mechanic my whole life, in many areas, and I saw this scenario several times. There is also the possibility that someone got lazy, but you can not prove it so just contact warranty service again and tell them that they must resume and attach it.