NPIV Virtual Port and WWN VM

Similar Questions

• Adding a virtual ports GRPE distributed and obtaining his object reference managed

  I added a group of virtual ports to the DVS using the AddDVPortgroup_Task (...) method.

  Now, I want to recover the object managed this group to port reference.

  Is it possible to get the task itself or what I need to do another discovery of the dvs for this?

  Thank you

  VSphere API documents - AddDVPortgroup_Task, the task does not return the reference to the newly created DVPortgroup. I know that some functions participated once, it's 'info.result' contains the object that has been created, but in the case of DVPortgroup, you will need to ask for it.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How to set up a "dummy" or "virtual" port

  Hi, I'm relatively new to Labview programming.  I work with the NI USB-6212.  I was wondering if it is possible to create a "dummy" or "virtual" port, so I can finally create a port for example line output. port0/line16.  Basically I want some bits to go to this line and the "status quo".

  Any suggestion would be appreciated.

  Thank you

  VK

  There are several ways to address the issue and how you will use this 'virtual' Port is one of the choice between the methods.

  The easiest way is to create a USB-6212 simulation:

  Interfaces and select Max devices

  Right click > create new > DAQmx simulated device or modular instrument

  Expand + M series: DAQ and select NI USB 6212.

  You'll be able to create scales channels etc. that are appropriate for a tasks OR USB 6212 assistant DAQmx will treat it as if it was true, and you can try the task and, LabVIEW code call a task on a simulated device will work just fine.

  The down side is when you actually get material its often difficult to retarget the tasks for using the real device (no option to send the task... no option to replace the device with...) Do not hesitate at the idea of Kudos. If you need to change the task or swap device names and which is not infallible.

  Another option that I use for my development (and, I code by intention... very rarely have any material or simulated in my cube)

  must care not the configuration of the task until I integrate with hardware.  Allows to set the example that I have in my current project:

  

  With the exception of the name of the task that this exact code is part of the project I opened today.  This AE wraps completely all I want to do with this task.  Now, I have the code to fall in my application and can create the easilly task on the target computer.  Notice of Here.vi? I'll just go through the hierarchy of the project and find all instances. Create the task and TEST IT on the live system.  When all instances of here.vi went my code is error free and integrated with the hardware running.

  [edit] it is what happens with a break in three hours while you answer.  Tim beats you to it

• Unpluging printer creates Virtual Port Mismatch

  Ive installed my printer Dymo 450 turbo twin perfectly. its been working for months. However, once I took my Dell Latitude mobile E5520 and reconnected the USB physical port EVEN on my computer, the print spooler has the wrong virtual port assigned.

  Of;

  Devices and printers >(right-click dymo) properties > Hardware tab > Usb printing support

  The location is listed as "Port_ #0001.Hub_ #0004.

  (this will be mapped to the virtual port USB004, OK?)

  But on the.

  Devices and printers > printer properties (click right dymo) > Ports tab >

  Virtual port USB002 is selected.

  the only other choice options are;

  USB001 (which is a zebra printer work)

  USB002 (not working dymo)

  USB005 (brother laser work)

  No other ports are listed.

  I tried to create a Local Port called USB004 without success.

  Ive also tried to go into Device Manager and restart-disable-reactivation USB Printer Support for Port_ #0001.Hub_ #0004

  also tried to update the driver to USB print media in the wizard.

  Without success.

  How do I add USB004, or re - map the printer to use the correct virtual port?

  I can post pictures if necessary but not sure about the site policy, so I'm not going until asked.

  a little history about me,

  IM the head of the company and am VERY familiar with Windows behind the scenes, the registry, the sysadmin and the CLI.

  I'm looking for a solution to the problem, but MORE importantly! I'm looking for WHY the solution WORKED. I believe that in mounting "teach a man to fish".

  I work Monday to Friday 9-5 and answered answers in a very timely manner. Feel free to request any additional information or clarification of the measures taken.

  Hi Erik,

  Please contact Microsoft Community.

  Advanced issues such as issues related to the virtual Port are supported in the TechNet Forums. I suggest you send the request in the following link.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprohardware

  Hope this information helps.

• USB 0001 virtual port for UsB not found

  When inatalling a Xerox Phaser 8560DN to my laptop HP Win 7 professinal it does not find the virtual USB 0001 port for UsB. I installed the printer even to other laptops and no prblem. When you come to select the port the virtual prot is tehre but not so much in this laptop and HP peole say it is not their problem. Any suggestions on what to do?

  Hello

  You don't see any other virtual ports except USB 0001?

  Follow these steps and check if that helps:

  1. go in Control Panel.
  2 Select all Control Panel items.
  3. open devices and printers.
  4. at the top of the window, select Add a printer.
  5. Select Add a local printer.
  6. If you want to choose a Printer Port, select use an existing port.
  7. in the drop-down list, select USB001 or USB0002 (virtual printer to USB Port).
  8. Select the next button.
  9. in the manufacturers section, select HP.
  10. in the printers section, search for your printer model and select it.

  Note: If your printer does not appear in the list of HP, select nearest LaserJet series model number.

  Click the Windows Update button. WU get the database driver for all HP printers.

  Note: the search may take a while.

  When the search is complete, go back to the HP section and your printer should now appear there. Select it and click the next button.

  Your printer appears in the printer name box, click Next again and the printer will be installed.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Nexus 1010 Services Virtual Appliance and VN-link hardware

  All,

  We deploy the Nexus 1010 Virtual Appliance service in order to use the analysis network (NAM) Module.  The 1010 necessary hosted of the MSM to deploy the 1000v switch into ESX.  We would also use VN-Link in the material by which we "get around" the virtual switch and use the 6120's for switching.  What I need to know, it's possible the 1010 always to analyze network traffic using hardware VN-link?  Hardware VN-link does not seem to need a VSM, so I think that the 1010 cannot monitor traffic because there is no "attach" to 1000v.  Anyone can shed some light on this?

  Kind regards

  Ken

  Ken

  The NAM module present in the 1010 is not exclusive for Nexus1000v traffic.

  Its there as part of a device which is be the VSM (1000v) and is set on its own.

  If you look at the Nexus1000v, the VSM (which is the 1010 and holds the NAM in this case) is * not * part of the VM data path.

  He's wanted for initial virtual port instantiations (veth) but after that the traffic does not go through it.

  So to send data traffic VM to the NAM module for analysis, another mechanism (such as ERSPAN) is used to route the data traffic of the VM is to her.

  The Nexus 1000v support ERSPAN.

  Same logic applies you have a NAM module-the 1000v can send traffic to it through ERSPAN.

  Looking to VN-link in hardware - there a MSM which is the INSTITUTION itself.

  In this case, the veth is on FI.

  If the FI did support ERSPAN (which is not currently), you can use the same NAM module or any other module of NAM for sending traffic to it.

  If this isn't a limitation of VN-link in hw methodology vs 1000v switching switching, but the fact that the FI does not yet support a mechanism of 'export '.

  I hope it helps

  Thank you

  -Matt

• WWPN-derivation-virtualized-port

  So I'm digging the Cisco C210 boxes.  I have several held so far.

  Just got a B series.    I feel like I'm back to Catholic school being scolded!   Hate me this thing! :-)

  I went through a laboratory firefly book to familiarize yourself with the configuration.    I "think" I have everything set up properly...

  I created a service profile, so I could in a few clicks apply to all four of my servers.  When I apply I get

  descr = "Service configuration profile Server1 failed for wwpn-derivation-virtualized-port"

  Good old google wasn't able to help me with this one.  I'm old-school Call Manager and person of Contact Center.  This virtualization stuff is very recent.  No experience with SAN.

  Is anyone able to tell me that I may have missed the error?

  Thanks in advance!

  Del

  Del,

  What WWPN pool is configured for the HBAs in your service profile?

  We can if expected this error message when we use the option 'Default material' and that the blade is installed with Cisco M81KR adapter (it does not have burnt in address WWPN)

  If this is the case, then try to create a WWPN pool and configure the service profile / HBAs to use WWPN from the pool.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/GUI/config/Guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_011111.html#task_106F15198C034D1BA1923DCCE2897F9F

  HTH

  Padma

• Group of port and the naming convention for vLAN

  What is the naming convention better for groups of ports on vSwitches?  This naming convention should match how we name them VLAN on the physical switches and how important is that?

  Hi VMinator,

  To answer your question, he has not agreed to 'standard' for names of portgroup.  That's all what you're comfortable with the support and what works for you and your organization.  A bit like server names; Some companies are going hardcore with the naming conventions and others their name after the characters in science fiction or world of warcraft bosses

  Forensic science more you pack in a naming of the control standard more you have (i.e. for scripts, health check, etc. see below).  Also, if the name itself answers questions on his own and allows you to save a phone call that is priceless.  For example - the guys says unix... "Uh which network to choose for my new virtual machine.  My IP is blah blah blah. "Well, with right portgroup name, this question would have answered itself... and maybe even recorded some interruptions of service in other cases by the simple fact of being clear and effective in the communication of how this virtual device should work: purely expressed through an appropriate naming convention.

  Here's another one.  My last concert, we had thousands of virtual machines that had to move data centers and when they landed, they needed to change the IPs and start using 3 vNIC (instead of 1) on each virtual machine.  Each vNIC with a different subnet mask.  All support should be conducted by a team of outsourced with minimum experience of VMware.  The only way to support something like this and be effective is PowerCLI.  With just invited the naming convention only, you can perform various tasks such as query the virtual computer and check its settings of portgroup compared to its actual IP information in the operating system, initiate a ping from .NET to the virtual machine, if there is any questions Act automatically.  Some actions that will have to be performed include, for example, change the portgroup or mask on a set of clients;  Or questioning guests and glean information network (CDP, vSwitch, portgroup of information etc.) and compare observed network vs network expected enumerated in the PG naming convention. etc etc.  The list of actions that you can take are limited only by your creativity.  The naming standards give you effective power both in manual and automatic efforts.

  Still, notice of one man, but every site I care and feeding generally ends with a PG standard similar to what I first described above in my previous post.  Don't forget my example naming convention is Basic.  There are many other attributes that you can add (i.e. in vCloud deployments, in addition to the info network, you can choose to identify various features specific to vCloud org-networks, etc.).

  TBH just most of the companies have appointed VM-network exchanges (ok not bad) or some random shortname which doesn't help troubleshooting.  They are fairly easy to fix and also change over time, if necessary.  You can easily drag and drop a set of virtual machines (although I don't personally do this way) in the new port group (via the page of networking to CTRL + SHIFT + N) or PowerCLI it (Yes!  way to go).  Of course, always the ping tests before and after the change.  There are a lot of scripts out there (or ask master lucd post in PowerCLI VMTN forums).  If this is net-news, then you are ahead of the game and will have a standard to follow, whatever it is.

  Best of luck and have fun!

• Route based on the ID of the virtual Port of departure

  Hi all

  Our client uses 'Route based on originating Virtual Port ID' to balance the load. Ayone know the ESX CLI command that shows the Virtual Machine <>= vmnic in this setting?

  There was a network problem in the customer environment, and I need to know what VM is linking to what (vmnic) uplink on the vswitch about? Or ESX does not show this explicit mapping through any tool?

  Thanks in advance.

  Dumlu

  Hello

  You can use esxtop, then hit low case n to change the network settings view. The 3rd column is the team of Teddy bear used by the virtual machine.

  Concerning

• Host virtual computer and Migration of data store

  I'm curious. I have an environment with Cisco UCS UC servers without them. Due to they are C-Series all storage is local for UC virtual machines run. I'll add some of the UCS C-Series servers and you want to move two of my current C-Series server CPU virtual machines to the new. I have the license Enterprise Plus 4.1 for all servers and execution of vCenter. The migration will be basicall move local data store to store local data as well under the name from host to host. My plan is to turn off the virtual machines and migrate both host and the data store at the same time. I have groups of ports built as follows:

  Port of VMKernerl groups:

  -Storage (for future shared storage)

  -vMotion

  -PI

  -ESXi Mgmt

  Virtual machine:

  -CPU VMS

  -Machines virtual server

  My overall question is during this migration takes place this network (or a group of Port) will be the traffic go anywhere for the move? My guess is because it is the local storage, it will use the Mgmt. ESXi

  Thank you!

  If the virtual machine will be moved to store Local data to store common data shared through 2 esxi host, then the storage shared for local storage.

  So this will be the case through network vMotion and not via the management network.

  But you can enable vmotion on management network itself. If you have configured like this then yes communication will be via the management via vmotion network IPkerenel active network.

• Difference between groups of ports and VLANS

  Hi guys

  I read ESX Admin guide 2 times till now, but I still don't know what exactly is the difference between groups of ports and VLANS? I understand, but if someone asks me this question I will not be able to respond with confidence.

  Network also label: my understanding is that it's just label No technical significance in configuration?

  Thanks in advance

  One VLAN is one of the many settings that you can configure for a group of ports, you also have the tabs security, Traffic Shaping and consolidation of NETWORK cards.

  Port group name, you associate you a VM port group must be placed systematically on other hosts if you want to migrate or virtual failover from one host to another.

  Scott.

  -

• What is a virtual port storage system

  VMware now supported the harbour active/active, active/passive, and virtual storage system. What is virtual port storage system, you can give me same example?

  in san guide old version, I can see the storage mode, indicate it is active/active or active/passive, find the last guide of san, not to mention that the online guide compat?

  A link to ' [storage virtual port | ]. "[http://virtualgeek.typepad.com/virtual_geek/2009/04/are-you-Stuck-with-a-single-Really-Busy-Array-port-When-using-ESX-script-for-Balancing-Multipathing-in-ESX-3x.html].

• my phone has port and new battery and still will not hold a charge

  my phone has port and new battery and still will not hold a charge

  What do you mean 'there port and new battery? If someone other than Apple has opened and replaced the things, it is now unbearable.

• Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you the end of the update

  Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you towards the end of the update to the back Beach

  Hello Bretus,

  Please contact the Mozilla Support and I am sorry that this update is not compatible with the extensions you use.

  Kaspersky support forums mention that these extensions will be updated soon, so that they are compatible with FF25. In the meantime, we do not recommend that downgrade you your version of Firefox, but you can find instructions and download locations for previous versions here:

  Install an older version of Firefox

  Please let us know if this solves your problem.

  Cheers, Patrick

• my macbook pro red on heart Tel port and no sound, what I can do to fix

  my macbook pro red on heart Tel port and no sound, what I can do to solve?

  The red light in the headphone when your Mac is convinced that he took an optical connection via this port.

  You need ti insert and remove the headset plug a dozen times to convince him to change the setting of metal cap and disable Optics (the red light is the optical sound).