NTVDM. EXE

Similar Questions

• NTVDM.exe is suspended.

  Windows XP Pro SP3.
  NTVDM.exe has suddenly stopped working if I run cmd.exe or command.com.  No error message, no prompt, just a blinking cursor.  If I run cmd.exe orders BACK internal DIR & CD work fine, but when I try to run one of my programs ntvdm.exe BACK starts and crashes.  When I run command.com ntvdm.exe starts immediately and crashes.

  It started when I installed a trial version of Nero 9 CD burner.  I discovered this problem and uninstalled Nero 9 about 2 hours later, but the problem persists.  The crew of Nero tech support had me do a scan and send it to them, but concluded that it did nothing to my computer to cause this problem.  I noticed that I have an empty folder named WindowsPowerShell in the windows\system32 directory, but I don't know if it's there before installing Nero 9.  I never used it.  I also noticed that there are no dosx.exe in the windows\system\32 directory.  I copied the \dllcache folder and that made no difference.  Seven weeks to research on the net has produced nothing.  I discovered yesterday the Process Monitor from Sysinternals and installed.  Exciting program!  After scanning through thousands of lines of events after ntvdm.exe begins until it crashes, several times, the only thing I found is an 'access denied' something done ntvdm.exe.  I don't remember the details.  None of the missing files.

  It drives me crazy!  You can provide any help will be greatly appreciated!

  Windows XP Pro SP3.
  NTVDM.exe has suddenly stopped working if I run cmd.exe or command.com.  No error message, no prompt, just a blinking cursor.  If I run cmd.exe orders BACK internal DIR & CD work fine, but when I try to run one of my programs ntvdm.exe BACK starts and crashes.  When I run command.com ntvdm.exe starts immediately and crashes.

  It started when I installed a trial version of Nero 9 CD burner.  I discovered this problem and uninstalled Nero 9 about 2 hours later, but the problem persists.  The crew of Nero tech support had me do a scan and send it to them, but concluded that it did nothing to my computer to cause this problem.  I noticed that I have an empty folder named WindowsPowerShell in the windows\system32 directory, but I don't know if it's there before installing Nero 9.  I never used it.  I also noticed that there are no dosx.exe in the windows\system\32 directory.  I copied the \dllcache folder and that made no difference.  Seven weeks to research on the net has produced nothing.  I discovered yesterday the Process Monitor from Sysinternals and installed.  Exciting program!  After scanning through thousands of lines of events after ntvdm.exe begins until it crashes, several times, the only thing I found is an 'access denied' something done ntvdm.exe.  I don't remember the details.  None of the missing files.

  It drives me crazy!  You can provide any help will be greatly appreciated!

  U have already repaired components of the help system
  sfc/scannow

• NTVDM.exe uses the power of the cpu.

  Running xp pro and it is slow. I noticed that 2 entries in the list of processes are the same and each medium 45-50 on the capacity of the CPU. They both show as ntvdm.exe.    I never noticed this file before running. I notice also under applications running that it lists nwwia. I don't know what it is and it obviously doesn't work, but my CPU usage remains at 100%, almost all the time now. Someone help?

  Windows Update has helpded me to solve this problem.

• After you have installed the KB2707511 and updates KB2724197, error in execution of NTVDM.exe.

  Original title: problem with KB2707511 and KB2724197 updates.

  When you enter a DOS program I get a failure of execution of NTVDM.exe. Remove these updates restores normal operation. Anyone know if there are risks in doing this?

  Hi LeRoy,

  If I understand correctly you will receive an error by, NTVDM.exe running, after having installed the updates KB2707511 and KB KB2724197. However once you uninstall the updates, the problem is resolved, is that correct?
  I apologize for the inconvenience, please note that it is a known problem and Microsoft released a supported fix to help solve the problem.
  Please follow the links below to help troubleshoot-made the question.

  I suggest you reinstall the security updates that you uninstalled and then run the fix as suggested to solve the problem.

  KB2707511 and KB2724197

  MS12-042: Description of the update of security for Windows XP and Windows Server 2003: 12 June 2012
  http://support.Microsoft.com/kb/2707511

  According to the section more information under, known issues with this security update.
  

  
  

  The hotfix update is available,

  "NTVDM. EXE has encountered a problem and needs to close"error message when you use 16-bit applications in Windows XP
  http://support.Microsoft.com/kb/2732488

  Once you run the hotfix you can continue to install the rest updates normally.

  Please let me know if the problem has been resolved, or if you need additional help on the issue.

  I hope this helps.

• NTVDM.exe failure after June 12 update XP

  Our firm uses Windows XP and all computers are automatic updates enabled.  A series of updates was held on Tuesday, June 12, after which we were unable to run a program that uses NTVDM.exe.  Using the system restore solved the problem, but caused others.  I really need to get this old 16-bit legacy running program.  Any ideas?

  Hello

  1. do you get any error code/message?

  2. What is the exact error message you get?

  Perform the steps mentioned below and check if this is useful:

  Troubleshooting in Windows XP MS-DOS-based programs

  http://support.Microsoft.com/kb/314106/

  I hope this helps.

• Previously, the programme of work gets error-NTVDM.exe has stopped working.

  Original title: I program I ran without error before, but now when I try to open it says systems NTVDM.exe "stopped working" and then closes the program. I have all the updates that are installed. How can I fix it?

  The program I am running has been provided by the National Fire Protection Association and I've been running it on this machine for the past two years with no problems

  The program I am running has been provided by the National Fire Protection Association and I've been running it on this machine for the past two years with no problems

  Suggestions:

  1.) closed try that program and reboot again.
  As I understand it, NTVDM.exe stops because a statement, it cannot pass the operating system.

  2.) right click the program > properties > compatibility > run this program as administrator > OK

  t-4-2

• -Pop-up message each time I log in that says: "ntvdm.exe has stopped working and it will be stopped."

  Greetings, West this pop up message annoyng which continues to appear a little each time, even if after I start my computer. It is said "ntvdm.exe has stopped working and he will be shut down", I close the window and aparently everything works OK. But it continues to if at all times, is there any problem? Why does this happen? Can it be fixed and how?

  My computer has an Intel Core Duo 2 CPU E6550 2.33 GHz, with 2 GB of RAM and my OS is windows vista business SP1 32-bit.

  Thanks for any help,

  Pedro Borba

  original title: ntvdm.exe stop working and will stop

  SALAM... I SAW UR QUESTION... HOWEVER, I KNEW THAT U HAVE PROBLEM WITH UR PROCESSOR FAN... PLEASE CLEAN IT WITH WIND TUNNEL YOU CAN FIND IN THE MARKET... AND BIOS PLEASE INCREASE THE TOLERANCE OF UR CPU TEMPERATURE... MY BEING of VALUE to 50 AND UR PROCESSOR IS HEATING BETWEEN 45 AND 55 degrees. TRY IT INSHALLAH IT WILL WORK... HOPE SOLVE UR PROBLEM...

  MOHAMMAD TOUSIF

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• problem of NTVDM.exe in virtual XP mode

  We organize a virtual DOS Windows XP program and the rest of the programs that we run in Windows 7.  Recently we received the following message, NTVDM. EXE has encountered a problem and needs to close.  We are sorry for the inconvenience. "This happens at times when in the program (which requires a status report on a job, or in a job cost validation), and the program then stops.  You did not notice it until recently.  Can you help us?

  Hello

  I would recommend posting your query in the professional environment of the TechNet IT base in the TechNet forum below will be able to best help.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  Hope the information is useful.

• NTVDM. EXE does not

  I am trying to run AutoSketch R2 (around 1993) using Windows 7 and when I try to open a file I get the message: NTVDM.exe is unresponsive.  Is there a way to fix this?

  Hey Gary5457,

  AutoSketch R2 is not compatible with Windows 7. Take a look at the below link which tells the same thing.

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=Autodesk%20Autosketch&v=Autodesk&uid=10&l=en&pf=0&pi=6&c=Enterprise%20Applications&sc=Industry-Specific%20Applications&os=64-bit

  Step 1:

  Try running in compatibility mode and check:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Step 2:

  If nothing helps, I suggest you contact the manufacturer:

  http://USA.Autodesk.com/ADSK/servlet/PC/index?ID=15115083&siteid=123112

  Kind regards

  Savan - Microsoft technical support.

• NTVDM. EXE is using 100% of CPU

  I have several clients that ntvdm.exe is run several times and take all CPUS.  Is there any solution for this? What is happening on the 2003 server and Win7.  I haven't run into this on Windows XP or Server 2008 and above.  I ran antivirus, anti-malware scans.  I'm a loser on that.  Any help is appreciated.

  Hi Curtis,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• NTVDM. EXE has stopped working/necessary for the game silent steel

  I have a Dell 8250 under Vista Ultimate desktop computer with a lot of memory.  I want to play STEEL SILENCER but must have ntvdm.exe working to run it properly.  I can use the program compatibility Wizard, but still need the ntvdm.exe.  Can you please help?

  Hello sgreggary,

  Thank you for using the Microsoft Answers forum.  To resolve this problem, use the tool (SFC.exe) System File Checker.  To do this, follow these steps:

  • 1. Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "NTVDM. EXE has encountered a problem and needs to close. "

  Hello

  It seems that many users know the problem with ntvdm.exe after installing the update of security KB2707511. As of today, it has not yet been resolved by successive updates of Microsoft. It is possible to send this problem to Microsoft? What is the procedure?

  Thank you
  Marc

  Hello

  You can post the issue here: http://social.technet.microsoft.com/Forums/en-US/tnfeedback/threads

  Thank you.

• NTVDM. EXE error because Windows Update yesterday

  Since the last version of Windows XP update yesterday, two of my eight computers will not open my program back. I get a message: NTVDM. EXE has encountered a problem and needs to close. AppName ntvdm.exe. AppVer 5.1.2600.5512. ModName kernel32.dll. 5.1.2600.5781 ModVer; Offset 00012afb. This problem is not consistent on all my computers, but is still a big problem for me. Love some tips.

  I want to thank all of you for your time and your thoughts. This is what took place:

  (1) before I dive deeply on the question, I did an image of the hard drive in question. I took the original disc, step by step repair of Windows, and on the last restart, the system could not load anything on the desktop, or pull up the Windows Activation Wizard. I then proceeded in the service of Microsoft's response and intensified in grade over several sessions and many hours. This path has never produced fruit.

  (2) I took the other disk "image" and had two technicians to address them without success. I also did all of your suggestions.

  (3) Finally, I made a new image a month ago since my last Backup Exec from Symantec. I did a scan of the CFS and installed 17 updates one at a time. The KB2707511 was again the culprit, and it is removed and hidden. I found it interesting that KB2707511 was not part of my series of update of original disc, but it appeared on this reconstruction of the hard drive.

  Lessons learned:
  (1) never delete restore points.
  (2) not to do a Windows repair without corresponding to the level of the disc at the level of the windows installed - ala remove Service Pack 3
  (3) Although the software is a pain, stand the Symantec Backup Exec.
  (4) you tech guys are very generous and a great help.

  Thanks again,
  gfgman

• After you install the update, I am getting NTVDM. EXE has encountered a problem and needs to close

  OK a bit on my setup, I have a Server 2008 R2 as a DC area, and in my Department and the engraving, we have four XP Pro SP3.  After the engraving machine is updated Automatic last night when we try to access a MS-DOS 16-bit program that works, I get the following error.

  NTVDM. EXE has encountered a problem and needs to close. We are sorry for the inconvenience.

  Error signature

  AppName: ntvdm.exe AppVer: ModName 5.1.2600.5512: ntvdm.exe

  ModVer: 5.1.2600.5512 Offset: 000206f1

  See http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/ntvdmexe-has-encountered-a-problem-and-needs-to/3ad3ae01-9685-4155-8d85-28f979e599af