Number key pad vs QWERTY?

Similar Questions

• FN + number keys not working on Satellite R630

  I can't get the functions on the digital keys that must be operated by the FN button to work (control volume keys 3 and 4, etc.).
  When I press FN a menu comes up with all the F keys, but if I press FN + number key, nothing happens.

  I use a brand-new Satellite R630 (windows 7).

  Thanks for any answers

  Hello

  Do you have what key tried? The numbers at the bottom of the row of keys F1 to F12 or the numbers right on pavement?

  Exceptionally, you should try the number keys at the bottom of the row of keys F1 to F12:
  FN + 1 SmoothView scale down
  FN + 2 SmoothView Scale-up
  FN + 3 lower the sound Volume
  FN + 4 sound Volume up

• Keyboard not typing special symbols above the number keys online, but works fine otherwise

  Original title: keyboard problem

  Keyboard not hitting that special symbols above the number keys online, but works fine otherwise. When the shift button is held and you press a number key he type the last letter, which was typed any symbol, you try to type. Keyboard worked fine before, tried another keyboard and got the same results.

  Hi Patrick,

  1. what type of keyboard you use? Is it wireless or wired?

  2. did you of recent changes on the system?

  3. what web browser do you use?

  Method 1:

  If you use Internet Explorer, you can use another web browser and check if the problem occurs.

  Method 2:
  Step 1:

  You can start the computer in safe mode with network and check if the problem persists.
  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• the number keys on the right side of my keyboard ar answers do not, how can I activate them?

  I have a packard bell computer and the number keys on the right side of my keyboard ar does not, how re can help them?

  Press the NumLock key

• number keys not working not not on Dell Inspiron 3521

  my letter of the keys work and keys that run along the top letter keys work too, but the number keys on the side don't work at all, I push the number to memorize and off several times and it makes a noise, but all this every time I'm trying the numbers, it's done the page up or down, or to highlight everything that is already typed in front of her.

  I looked to see if there's a position that has the answer to the question and their share, I tried fn + f3 and alt + shift + numlk but it did not work.

  both and discovered what it was that I had to "use the numeric keypad to move the mouse on the screen" in mouse easy access, just had to turn it off, and I was good to go

• The 10 key pad does not work on my wireless keyboard.

  This just happened.  For some reason any (I don't know if a me or something) when I use the keyboard 10 keys on my wireless (mouse and keyboard microsoft 1000 wireless) keyboard, the keyboard uses only features home, pageup, end, PG. FF.  I do a lot of work in the spreadsheet, and it is very inconveneint for not being able to use the 10-key pad.  Can anyone help me to reset my keyboard so the keyboard-10 is functional?

  Your keyboard has a digital lock key [often just marked NumLock]?  If so based on it does nothing to change the problem?  So that you can address this issue immediately, look at control panel, keyboard to see if there is a way to permanently allow the pad [if that's what suits you] to avoid this problem in the future.

  If it has no NumLock key then this can be achieved by the software & could inadvertently pressing keys that are its hotkey to toggle NumLock key on & off.  You will need to check the manual to see how to set / unset unless what information & control of adjustment are Control Panel keyboard.

• change serial number key to Windows 7 Home Basic Windows 7 pro

  How to change serial number key to Windows 7 pro to Home Basic to Windows 7 without loss all files and personal data?

  You must clean reinstall Windows 7

  He was a popular workaround to versions of change , but has not been working lately, so it may have been prevented.  But you need to back up your files, because the files should always be supported against failure hard drive if you care for them at all, and especially during the repair or reinstall operations.  So if you do this, you might as well do the Reinstall much higher.

  Stick with the steps, tools and methods in the wiki of blue link and you will have a perfect installation that will stay that way as long as you do.

• Number keys do more change opacity in the Brush tool.

  I have always used the number keys to set the opacity of the Brush tool.  All of a sudden it now flows, not affect opacity.  At the same time this functionality has changed I started having to click a mask for the [] keys change the size of the brush.  I used to be able to change the size without selecting the mask.  I inadvertently change some setting?  I'm using CS5 12.0 x 64 on Mac in 10.6.8.  Thank you!!!

  You're probably mode airbrush-style. There is a switch in the Options bar.

• Pavilion 15: number keys on the keyboard does not

  I obviously made some changes with a result that the keypad does not work and I do not remember how to activate them. help please

  Hey @frederickw1,.

  Welcome to the Forums!

  I understand that the keypad does not work. You mentioned that you have changed a few things. I'm here to help! I also changed the settings before and lost the use of my pad. Here are a few steps that can help.

  Please make sure that the NumLock key is pressed while the button lights on your keyboard, which indicates that it works.

  Please, start your computer in Mode safe. The numeric keypad works in Mode safe?

  If the keyboard works fine in safe mode, then I suggest that do you a clean boot to see if another program blocking the use of the keyboard (How to perform a boot in Windows).

  • Right-click the Start button
  • Go to the control panel
  • Go to ease of access
  • Click on change how your keyboard works
  • Remove the turn checks on the keys area rocking. (This should stop your laptop computer to beep when you press the NumLock key).
  • Press OK.

  

  If there is a check next to mouse keys:

  • Get him out.
  • Press OK.
  • Test the keypad.

  If there is NOT a check next to mouse keys:

  • Please check the box
  • Press OK.
  • Test the keypad.

  Here is a document you can try troubleshooting not called Portable keyboard troubleshooting (Windows 10: 8).

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  f you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems.

  Thank you for agreeing!

  Forward to your response.

  Have a great day!

• HP r-062tu: key pad is loose

  I recently bought a laptop but unfortunately after a month or two keys on my keyboard started loose even if they are not much loose but I feel uncomfortable by the keys, I thought to call the customer service but my keys are very loose and I don't think they would help. Can anyone suggest a solution.

  Hello @jeevansai502,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  Also, can you provide me with a little more information about the issue you have with the keyboard?  Are you indicating that they keyboard itself becomes loose, or that some of the keys become loose?  Sometimes, it is normal for the keys become looser with use.  It is simply the process of breaking - in the keys.  Forward to your response.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• After update to El Capital, cannot get numbers key pad to work on several different keyboards

  Updated to v10.11.5 and now cannot get the keys on the keyboard to work. Have tried several keybds and different brands. Any suggestions?

  Not sure if it works but try resetting the SMC.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Satellite A660-155 "KEY PAD LIGHTS" is disabled

  1 MONTH OLD MACHINE, SOMETHING OR NOTHING?

  The word Sam, pad top line touch and all the icons next to power button use to light up.
  Now only the power button lights up.

  Is there a switch/button I have typo by mistake, or is it a defective machine.

  Thank you ideas

  Hello

  Go to BIOS and check the option called illumination.
  This must be enabled.
  If it, s enabled in the BIOS, then set the BIOS to the default settings, toggle the option (enabled/disabled) lighting and save changes.
  Restart the unit.

• HP dv5 1002nr: mobile caps and the number key at the same time blink once

  I was doing some updates on the computer when the power of the battery is dead and when the power cord I had a black screen and the caps and digital key will appear to blink once at the same time. I upgraded the operating system about 1 months ago for Windows 7 and it works fine until the updates have started to update.

  Hey there @Masen2016!

  Thanks for the reply as on caps and numlock lights blink once each time.

  This indicates that it could be a problem with the processor,

  And you cannot pass a processor on a laptop as the system in the BIOS configuration is written in.

  If you upgrade a laptop part would be a malfunction.

  So, you can contact HP and get the machine.

  Link to contact HP: http://hp.care/2bkTGBQ

  Have a great day!

• No number key on T440s?

  I'm only enter data digital and discovered that there is no on the new designed keyboard num lock key. Also, it has no description on this subject in the manual. I put something to use? Can anyone help?

  Thank you both of you. I fixed my problem by using hotkeys =]

• 9 number keys

  It simply doesn't get it. I tried testerday for the first time you are trying to communicate with my answering of the carrier service, but... some keys don't seem to meet. Impossible to listen to the messages, then. What is the problem?

  g.

  All the system/standard you call with this function uses the same DTMF tones. It does change from system to System. If it works fine for all other functions are you need to use it, I can't say it's a problem with the phone. And there are no settings for it in the phone itself.

  If you think that the problem is in the phone, I can only suggest that you perform a repair of software on your phone via PC Companion:
  http://support.sonymobile.com/global-en/tools/PC-companion/

  In PC Companion, you press start on the support Zone > begin on updating the software of the phone/Tablet > repair phone/Tablet (the blue clickable link in the message) > proceed without going through your device connected to the computer.

  Follow the instructions that appear in the program and do not connect your device to this guide explains how to connect.