number of lines in the ListView blackberry stunts QML

Similar Questions

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• How to count the number or lines in the file

  Hi Experts,
  
  I'm file as source and Oracle as target. My folder that contains some data that will load the target.
  My requirement is that I want to count the number of lines that contains my folder. Please help me how to count the total number of lines in the file.
  
  
  THX,
  Sara.

  Hi Sahaveda,

  Now, I tried and it works.

  Sorry my mistake again.

  I created HR. ETL_FILE_LOG as below:

  CREATE THE TABLE HR. ETL_FILE_LOG (numero_fichier varchar2 (10))

  Below the code will run without error:

  import java.lang as lang

  import java.sql SQL

  import of java.lang.String

  Import os

  disadvantages is sql. DriverManager.getConnection ("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")

  dblinks = cons.createStatement)

  File1 = Open ('c:\EMP.txt','r')

  Count = 0

  Line = file1. ReadLine()

  all online! ='' :

  Count += 1

  Line = file1. ReadLine()

  File1. Close()

  sqlQuery = "insert into HR. "The values of ETL_FILE_LOG (numero_fichier) (" + str (count) + ' ") '.

  rqQuery = dblinks.execute (sqlQuery)

  jerks. Close()

  Concerning

• How get the number of items in the ListView inside QML?

  QML/JavaScript newbe question here please.

  Suppose I have .qml

  import bb.cascades 1.0
  
  NavigationPane {
      id: navigationPane
      Page {
  ...
          Container {
  ...
                ListView {
                      id: listviewPlayers
  ...
  

  and I want to do something if ListView does contain all of the elements

      onCreationCompleted: {
          // this slot is called when declarative scene is created
          if (listviewPlayers.AllItems.count() == 0){
              // do something;
          }
  

  but when I run the present I get complain AllItems is not defined in this line:

   if (listviewPlayers.AllItems.count() == 0){
  

  What I doing wron? I can do the same thing in C++ without any problem.

  Thank you.

  Oh, this thing AllItems seems to be a 'Sentinel' or a magic value used in special cases, unrelated to this.

  I think that ListView manages all this, but defers everything to do with the pieces of data to the model, you don't have to go to the model for the data. ListView knows how VisualNodes (the components list item) he created at the time of the display on the screen, but also have to tell you the total number of elements in the model would simply duplicate work. (The reasoning behind this interpretant.)

• Collect in bulk in stores less number of lines in the collection when you use the LIMIT?

  I wrote the following PL SQL anonymous block. However, the line dbms_output.put_line (total_tckt_col. FINALLY gives me) output as 366 (DBMS_OUTPUT is Developer SQL) which is correct when there is no limit. If the limit is set at 100 in the FETCH statement then dbms_output.put_line (total_tckt_col. Give me FINALLY) 66. What I'm doing wrong here?

  
  

  DECLARE

   CURSOR cur_total_tckt 
   is
   select  t.ticket_id ticket_id, t.created_date created_date, t.created_by created_by, t.ticket_status ticket_status,
  t.last_changed last_changed, h.created_date closed_date
   from n01.cc_ticket_info t
   inner join n01.cc_ticket_status_history h
   on (t.ticket_id = h.ticket_id)
   where t.last_changed >= '6/28/2012 17:28:59' and t.last_changed < (sysdate + interval '1' day);

  type total_tckt_colcn
   is
   TABLE OF cur_total_tckt%rowtype;
  total_tckt_col total_tckt_colcn;
  total_coach_col total_tckt_colcn;
   begin

  total_tckt_col  := total_tckt_colcn ();
  total_coach_col := total_tckt_colcn ();
   OPEN cur_total_tckt;
  loop
   fetch cur_total_tckt bulk collect into total_tckt_col;
-- fetch cur_total_tckt bulk collect into total_tckt_col limit 100;
   EXIT
   WHEN (cur_total_tckt%NOTFOUND);
   END LOOP ;
   CLOSE cur_total_tckt;  

  dbms_output.put_line(total_tckt_col.LAST); 

   FOR i IN total_tckt_col.first..total_tckt_col.last
  LOOP

  dbms_output.put_line(i);

   END LOOP;
   end;

  Jocelyn says:

  This is a modified version of your code on the standard table EMP in schema scott.

  Have you tested it? All you have is last batch has 4 rows. But you print outsite the loop. That way if the last batch is incomplete (within boundary lines) last batch does not have your loop. Suppose you want to print the enames:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER

  PL/SQL procedure successfully completed.

  SQL >

  As you can see, it didn't print the last batch. Why? Because NOTFOUND is set to true if the number of lines that you asked to fetch was not recovered. This last batch has 4 rows while the claim code to get 5. Therefore, NOTFOUND has the value true and outputs code before dealing with this last batch. Therefore, repeat the treatment code again once outside the loop:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of the total_tckt_col 5;

  EXIT WHEN cur_total_tckt % NOTFOUND;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  But you have to accept to repeat that twice the processing code is no better solution. When you use BULK COLLECT LIMIT we should not leave NOTFOUND but rather by collection.count = 0:

  DECLARE

  CURSOR cur_total_tckt

  IS

  Select ename

  EMP; -I have a total of 14 records in this table

  type total_tckt_colcn

  is

  TABLE OF THE cur_total_tckt % rowtype;

  total_tckt_col total_tckt_colcn;

  BEGIN

  total_tckt_col: = total_tckt_colcn ();

  OPEN cur_total_tckt.

  LOOP

  Cur_total_tckt fetch bulk collect within the limits of total_tckt_col 6;

  WHEN OUTPUT total_tckt_col.count = 0;

  FOR v_i IN 1.total_tckt_col.count LOOP

  dbms_output.put_line (total_tckt_col (v_i) .ename);

  END LOOP;

  END LOOP;

  CLOSE Cur_total_tckt;

  END;

  /

  SMITH
  ALLEN
  WARD
  JONES
  MARTIN
  BLAKE
  CLARK
  SCOTT
  KING
  TURNER
  ADAMS
  JAMES
  FORD
  MILLER

  PL/SQL procedure successfully completed.

  SQL >

  SY.

• How to find the number of lines in the content of the text?

  Hi all

  I have a multi line text element. I want to know the number of lines in a text element? How can I do?

  Note that all lines end with the SHIFT + ENTER.

  Example,

  It is a

  sample.

  After the line there is a there is (SHIFT + ENTER).

  Thanks for any help.

  Whenever the user enters the shift-enter, Photoshop inserts a control [EOT] (end of text) (\x03 or \u0003) character in the string.

  Also, in order to divide the text according to multiple separators in a single call, it is necessary to use a regular expression instead of a string.

  Try replacing:

  var theArray = theText.split("\r");
  

  with:

  var theArray = theText.split(/[\u0003\r]/);
  

  BTW, you can improve performance by explicitly asking the textKey for the current object of the layer property.

  Try using:

     ref.putProperty( charIDToTypeID("Prpr"), stringIDToTypeID("textKey") );
     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  Instead of:

     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  HTH...

• display the Total number of lines in the first page of the report

  Hi, in obiee, paging will be 1-25. Is there any possibility in obiee to display the total number of lines next to paging. Ex: If the result contains the 120 lines. It should show after paging
  
  Documents 1-25. Total records: 120

  User,

  If this is the very simple case go in narrative display

  In the Narrative section give

  No.Of.Records: @4

  in my case is 4th column: No.Of.Records where fx = max (rcount (1))

  GoTo Compound display click the button Add and align narrative view down to see table

  Thank you
  Saichand.v

• Number of lines on the query and export are different?

  Hello
  
  I'm kinda new to SQL Developer, but so far it has been very well. I came across a problem, but with a certain query I count the lines and get about 11 000 (which is what I expected), and then export the data to a csv file to download on another system, and somehow the number of lines is increased to 30,000? I tried several times and still get the same results, and I know that the extra lines should not be returned to request bythe they fail when uploaded to the other system.
  
  Does anyone have any idea why this could be? The query is a union query, but it was fine before. Looks like a bug to me, but then again that I am a newbie.
  
  Thank you
  
  Steve

  The recordtypeextract r table is not related to any other table. Link with another table and avoid the Cartesian join.

• number of lines in the procedure

  I want to get the no. of the line count (rows inserted) in the procedure when I insert the record in any table in the procedure. When I tried to print sql % number of lines per dbms_output it gives me 0, but I have inserted 1 record successfully.help me.

  number of rows SQL % always gives you the number of simple lines of a dml statement

  for example:

  insertion in x select * from there where rownum<>
  Here the number of lines sql % will be 9.

  Now, if I run another same insertion if for the same table, the number of lines sql % will be reset and start from scratch.

  I hope this helps...

  SQL> set serveroutput on
  SQL> begin
    2  insert into temp_mat values(1);
    3  commit;
    4  dbms_output.put_line('sql%rowcount-->'||sql%rowcount);
    5  insert into temp_mat values(1);
    6  insert into temp_mat select 1 from dual union all select 2 from dual;
    7  dbms_output.put_line('sql%rowcount-->'||sql%rowcount);
    8  commit;
    9  end;
   10  /
  sql%rowcount-->0
  sql%rowcount-->2
  

  Published by: [email protected] on April 15, 2010 23:56

• Problems with sorting of columns and the number of lines in the report

  Hello
  
  I'm having a problem with sorting of columns and the number of lines displayed in a report.
  
  This report displays the data correct, but if I try to sort on a column when I click on the column heading in the report returns no line... I need to click on the "go" button to refresh the report (with the column sorted now) in to display the data.
  
  Similarly, I display only 15 lines per page. If I try to view the lines 16-30, 31-45, etc., that it returns no line until I click on the 'go' button to refresh again.
  
  Has anyone else had (and overcome) the same problem?
  
  Thank you
  
  Joseph

  Joseph,

  2 questions:

  1) are you using the elements referenced by the report page to filter etc.. ? If so, you're failing values of these when the loading of the page?
  (2) are you using PPR page through the results?

  If so, it could be a problem with the different types of session state, as Anton Nielsen blogged about here:
  http://c2anton.blogspot.com/2008/12/Oracle-Application-Express-Apex-three.html

  If so, you can use calculations or processes to set element values in session state persistent during page rendering, as Anton mentions. In this way, when you use PPR page values will be available in session state and your report should work fine.

  Anthony.

• Is there a limitation of the list of selection display the number of lines in the report in the apex?

  In my report, I'll run the application process, it is not display 34 rows in the data, but shows only 3 rows that too hardcode rownum < = 20

  the query run perfect in backend

  FOR rec IN (select distinct class_name, id r

  from table_name

  where country_id = (select distinct domicile_country_id of ()

  Select domicile_country_id from table_name table where id = l_ser and domicile__id is not null

  Union

  Select domicile_country_id from table_name table where id = l_ser and domicile__id is not null)) and rownum < = 20 order by 1

  )

  Help, please

  Thanks to all the problem showed lines but the symbol '&' in one line appeared the problem so

  used REGEXP_REPLACE (column_name, ' [and] +', 'and' ') and its done

• onTrigger go to the last line of the ListView

  Hello

  The above is possible? I have a list of RSS, I would like to know is there a way I can do onTrigger go to the last column in my listView.

  Thank you

  How can I get the number of items in dataModel?

  It depends on dataModel type you use, see the documentation for the corresponding classes.

  For ArrayDataModel and GroupDataModel:

  var n = dataModel.size () / / or dataModel.childCount (0) - number of students in first section

  Row is a table where the first number is the section and the second is stored in the section.

  Something like this should work:

  var dataModelSize = listViewId.dataModel.size(); // or listViewId.dataModel.childCount(0)if (dataModelSize > 0)
  {
    var lastRowNumber = dataModelSize - 1
    listViewId.scrollToItem([0, lastRowNumber], ScrollAnimation.Default);
  }
  

  Replace the listViewId with the id of your ListView.

  If this does not work, please copy - paste your current code and errors that appear in the papers (as appropriate).

• How to increase the number of lines of the App on the start screen

   I use the Lenovo Yoga powered by Windows 8 RT. When I turn on my computer and it goes to the start screen, 3 rows of Apps are displayed. However, every now and then, for some reason, it displays 4 rows of Apps. I usually adjust my Apps to suit line 4 because I prefer that display but, it always changes back to 3 ranks.   
  I am sure I have the correct screen resolution and my computer sleeps 4 rows of apps on the home screen, but I'm just not how to do it. I have 4 rows Apps displayed permanently and not only sometimes by chance. I would really appreciate if someone could give me a step by step on how to do. Thank you.

  This Friday, October 18, free to 8.1 Windows Update will be downloaded to your computer and your splash screen settings can be adjusted to display more lines.

• Unable to update the number of lines in the physical layer... connection failed in OBIEE 11 g

  Hi guys,.

  I am not able to make the number of rows updated in the physical layer, I get an error message failed to connect. It comes to OBIEE 11 g Linux approx.

  I put the tnsnames.ora file in the following path:

  / * / pkgs/linux/intel/OBIEE_DIT/MW_HOME/Oracle_BI1/network/admin /.

  I have no admin under

  / * / pkgs/linux/intel/OBIEE_DIT/MW_HOME/oracle_common/network /.

  But if I enter all TNS in Data Source name, I am able to connect:

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = xxx.xxx.com) (PORT = 1671)) (CONNECT_DATA = (SERVICE_NAME = US1OBIEE)))

  I am not able to understand the question...

  Thank you

  Amit

  It seems that the RPD is looking for local tns config... try to use as hostname: port / ServiceName

  It should work, just in case where does not! stop to do so since it is question.

  If brand aid

• Get the number of lines to different tables on the same line

  How can I get the number of lines for the different tables in a single line:
  
  SELECT count (A), count (B), count (C) table tb_a A, tb_b B, tb_c C;
  
  Thank you!

  Maybe if you want a little sophisticated look ;)

  select *
    from (select 'a' tbl_name,count(*) cnt
            from table_a
          union all
          select 'b' tbl_name,count(*) cnt
            from table_b
          union all
          select 'c' tbl_name,count(*) cnt
            from table_c
         )
   pivot (max(cnt) kount for tbl_name in ('a' as tbl_a,'b' as tbl_b,'c' as tbl_c))
  

  Concerning

  Etbin