Number with the Device Manager appears as empty.

Similar Questions

• computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

  tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

  Hello

  I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  After you have installed the camera, please check in the folder C:/Program files if it shows there.

  It may be useful

• I can't connect to the network using the Wi - Fi connection. In addition, the Device Manager is empty.

  Device Manager is empty and I can't make wireless connections more

  If Device Manager is empty, check article to see if it will be useful.

  Article number: 311504 - no items appear in the Device Manager list when you open
  http://support.Microsoft.com/kb/311504
  
  Perhaps because the service Plug-and-Play is turned off (disabled).

  Please reply back and let us know if that is the case.

  Thank you

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Windows 10 - PC recognize iPad, but iTunes does not. Nothing appears in the Device Manager.

  I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.

  Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• The TASK Manager appears no not with all the available controls - IE exit. ___

  When I run the TASK Manager, I see only the central part of it.  List has ImageName, etc. of user names.  The button view the process and the buttons to complete the process are there.  The outer part to control the Task Manager appears at all.

  Double-click inside the border of the Task Manager for remedy.

  http://www.Vistax64.com/tutorials/114377-Task-Manager-small-footprint-mode.html

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• Device Manager list is empty.

  Original title: unable to display the Device Manager in windows 7

  What can I do for the list in Device Manager? It does not show anything.

  Hi Tracy55,

  Thanks for posting the request in the Microsoft Community. It seems that the list of Device Manager is empty.

  Answering this question that will help us to better help you:

  Were there recent changes made on the computer before the show?

  This problem occurs if the Plug-and-Play service has been disabled (disabled).

  Please follow the steps below and we update with the results.

  Method 1: To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click Plug-and-Play. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click Automatic, and then OK.

  d. close Services.

  e. restart the computer.

  Method 2: The other reason, Device Manager may be empty is because there are some security issues with the registry key.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Try following registry editing to fix your problem:

  a. click "Start", click "Run", type "regedt32" and press ENTER.

  b. expand the "HKEY_LOCAL_MACHINE" window

  c. scroll down to "SYSTEM\CurrentControlSet\Enum".

  d.Enum"selected, click on"security","Permissions"menu.

  Note: At this point, you'll probably notice that there are no permissions on this key.

  e. click 'Add'.

  f. Add the group "everyone" and the "SYSTEM" user.

  g. Select "everyone" and check "read" ONLY!

  h. Select 'SYSTEM' and check the 'total control'.

  i. click on the button "Advanced" at the bottom of the window.

  j. in the Advanced window, select "Reset permissions on all child objects...". »

  k. click 'OK'.

  l. in the warning window click "Yes."

  Mr. close the registry editor and check with the question.

  Let us know if it helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• Windows 8 crashes when running 'find the hardware changes' in the Device Manager, requiring forced stop

  I just installed Windows 8 Pro on a system that were running Windows 7 without problem.  After completing a clean Windows 8 Pro Setup program, I went from hollow driver installation, but found the package to install for my card its caused Windows 8 Pro drivers to lock up and become completely numb.  I had to force a shutdown by pressing the button for 4 seconds.

  Trying to solve the problem, I found that manually install the drivers through the device manager didn't cause any problems.  In addition, installation of the drivers available through Windows Update also worked without problem. However, these two methods fail to install parts of the pilot training included him.  Then I have to uninstall the device from the package of drivers again.  I uninstalled the sound card via Device Manager and selected "Delete the driver for this device."  When I followed this with a "Scan for hardware changes" again the list my sound card, I have found that Windows 8 Hung again.

  After trying other options with no resolution, I tried to reinstall fresh Windows 8.   To exclude a possible problem with Windows 8, I opened Device Manager, as soon as I could after installing Windows and ran "find the hardware changes.  New Windows 8 freezes.  I can't place blame on post installation any software or driver.  This seems to be a problem with Windows 8 itself.

  A final note, sometimes "find the hardware changes" will actually work, but most often it forces the system to hang.

  Does anyone else have this problem?  Can anyone provide assistance? (chart below for comparison)

  Processor: Core i7 3770 k

  Motherboard: MSI Z77A-GD80

  RAM: 16 GB

  Video: GeForce GTX 680

  Audio: Creative Sound Blaster Recon3D

  HARD drive: 1 x Corsair Force SSD 3

  RAID: 3 x 1 TB RAID 5

  It seems that I am victim of dynamic ticks.  Research on my question, I have found several discussions around the ' net for crashes/freezes random in Windows 8, but none of them appeared to agree to my problem.  However, they all had the same solutions.

  Run the following command in a command prompt to disable the dynamic ticks.

  bcdedit/set disabledynamictick Yes

  I thought that I have that would give a shot, and it worked.  I wrote this answer, I also found that there is a recent update of the BIOS for my motherboard which indicates "Support Windows8 feature."  With the new BIOS applied, I was able to turn dynamic ticks and have been broadcast since w/o freezes.  I also managed to install all my drivers.  Anyone else having this problem maybe try updating the motherboard BIOS, otherwise try the above command.

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)

• Bluetooth disappears from the Device Manager

  Hello I have a HP Envy 13 - x 2 j002dx and I'm having bluetooth associated with is questions is frustrating given the bluetooth keyboard. Every day my bluetooth driver disappears from the Device Manager and the bluetooth settings option does not appear again. I need to reinstall the Intel bluetooth driver (sp68385) every day and even if I can't find the device manager driver he said whenever the driver is already on my computer. Please help I love the computer, but I'm ready to get rid of it because of this problem. I don't have to reinstall a driver every two days or so to use my keyboard.

  Another thing to try... restoration/uninstall both drivers WiFi and bluetooth. Especially if you have just updated their. At some point, I updated the driver wifi intel on my asus laptop and the missing of Bluetooth. Took me several hours of research and to play with the drivers to understand a wifi update some how stuck on the bluetooth hardware.