Numbers of crashing on the Sierra
I'm under that numbers on macOS 16A304a Sierra 3.6.2 build (Public Beta 6) on a mid-2010 MacBook 2.4 GHz Core 2 Duo with 8 GB of RAM.
I have a spreadsheet of costs where, as its name suggests, allows me to enter all my costs for my different bank accounts. Daily, weekly and monthly totals are calculated within the same worksheet and on another sheet of the same file, so I have an array of account balance vs time, whenever I enter a value the sheet of spending a bunch of calculations are completed. Since the upgrade to Sierra numbers has been crashing (on this worksheet only) when:
- I do not save the document after each cell I have change
- I wait too long to save after editing a cell - usually 5-10 seconds
- Take more than 2-3 seconds to change a cell
It of extremely frustrating and translates many accidents per minute. Please help because I use this everyday spreadsheet
Thank you very much!
Beta software can not be discussed in public forums.
Beta software should not be run on a production system. It is intended for testing.
Tags: iWork
Similar Questions
-
Notes crashes in the Sierra. Help, please!
After the upgrade on my iMac (mid-2014), I can't open the Notes. Crashes every time after I clicked through the tutorial on the new updates for Notes. Help, please! Thank you!
Stop your restart the computer. Launch of Notes, but do not use the tutorial.
-
MacBook air crashes after the release of sleep since the upgrade of the sierra
Began to notice that since I upgraded my macbook air 2015 to sierra, system crashes. The trigger is always when I wake the sleep system (whether it is by opening cover or press a key). Issue is intermittent and may not be reproduced every time. I contacted apple support and they recommended resetting the SMC (ctrl + shift + cmd) but that didn't help either. I also did a check of filesystem (fsck-fy) and which seems to be very well so.
I noticed others seem to be faced with similar problems and a common theme that I noticed was that both we seem to have an installed tardisk. Not sure if this could be a factor?
While it is not any loss of data, the question is certainly annoying and disruptive to work.
The same question was observed at about 7 times since the update of the sierra. Containing the report of Etrecheck to the breast
# Date and time 1 Kills Sep 28 10:03:09 2016 2 Kills Sep 28 18:13:50 2016 3 Fri 30 Sep 11:49:16 2016 4 1 Oct 01:05:15 Sam 2016 5 Mon 3 Oct 08:05:42 2016 6 Mar 4 14:26:03 Oct 2016 7 Sea 5 Oct 11:19:17 2016 Sea 5 Oct 11:19:17 2016
Panic report *.
panic (the appellant 2 0xffffff8004f7316e cpu): initproc is out - output namespace 2 subcode 0xa description reason: no
News of the UUID:
0 x 101425000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >
0 x 100713000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >
Thread 3 crashed
RAX: 0 X 0000000000002210, RBX: 0X00007FFFE358C314 RCX: 0X0000700000F06BDB RDX: 0X000000010075DD1E
RER: 0X0000700000F06B30, RBP: 0X0000700000F06B70, IHR: 0X000000010075C698, RDI: 0X0000700000F06BDC
R8: 0X0000700000F06BD0, R9: 0X0000700000F06BCC, R10: 0 X 0000000004001080, R11: 0 X 0000000100756188
R12: 0X000000010075E8A8, R13: 0X0000700000F06BCC, R14: 0X0000700000F06BDC R15: 0X000000010075C698
RFL: 0 X 0000000000010283, RIP: 0X000000010143B605, CS: 0X000000000000002B, SS: 0 X 0000000000000023
Thread 0: 0xffffff80108dcdc8
0x00007fffe36b7456
Could not read the context 0x0000700000e01cd8 LR
Thread 1: 0xffffff80108e1748
0x00007fffe36bf27e
0x00007fffe3568337
0 x 0000000000000000
Thread 2: 0xffffff801558e6f8
0x00007fffe37a6214
3 wire: 0xffffff80159b8028
0x000000010143b605
0x0000000101441c7e
0x00000001014297ad
0x00007fffe358c48e
0 x 0000000100756188
0x00000001007265f3
0x0000000100725ef8
0x00000001007291cb
0x00007fffe355a128
0x00007fffe356fc10
0x00007fffe3565ad2
0x00007fffe355c966
0x00007fffe35709d2
0x00007fffe3562d41
0x00007fffe35713bf
0x00007fffe35741b0
0x00007fffe37a661f
0x00007fffe37a6221
0 x 0000000042000000
Thread 4: 0xffffff80151f4260
0x00007fffe36bf4e6
0x00007fffe37a6221
0 x 0000000000000000
Wire 5: 0xffffff8015c45e18
0x00007fffe37a6214
Mac OS version: 16A 323
Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)
******************************************************************************** *******************************************************
Mar 4 14:26:03 Oct 2016
Panic report *.
panic (cpu 1 0xffffff801817316e appellant): initproc is out - output namespace 2 subcode 0xa description reason: no
News of the UUID:
0x1065e4000 uuid = < a525eaea-af86-30c2-b360-3d093b4f0828 >
0x1055df000 uuid = < 268e1319-a81e-384a-9303-67c26873038a >
Thread 3 crashed
RAX: 0 X 0000000000000000, RBX: 0000000000000078 RCX 0 X: 0 X 0000000000000000, RDX: 0X000000000000007D
RER: 0X00007000061AC868, RBP: 0X00007000061ACCD0, IHR: 0X00007FDF61717C40, RDI: 0X00007000061AC888
R8: 0 X 0000000000000040, R9: 0X00007FFFE56873D0, R10: 0XFFFFFFFFFFFFFFFF, R11: 0 X 0000000000012068
R12: 0X00007FFFE5688148, R13: 0X00007FDF6160FAB4, R14: 0X00007000061ACCF0 R15: 0X00007FDF6160FAA0
RFL: 0 X 0000000000010206, RIP: 0X00007FFFDB52C00E, CS: 0X000000000000002B, SS: 0 X 0000000000000023
Thread 0: 0xffffff8023eb2be0
0x00007fffdcad2456
Could not read the context 0x0000700005fa0cd8 LR
Thread 1: 0xffffff8023eae260
0x00007fffdcada27e
0x00007fffdc983337
0 x 0000000000000000
Thread 2: 0xffffff802669e498
0x00007fffdcada4e6
0x00007fffdcbc1221
0 x 0000000042000000
3 wire: 0xffffff8027112260
0x00007fffdb52c00e
0x000000010561051d
0x00007fffdc975128
0x00007fffdc98ac10
0x00007fffdc980ad2
0x00007fffdc977966
0x00007fffdc976ee0
0x00007fffdc976cb7
0x00007fffdcbc1746
0x00007fffdcbc1221
0 x 0000000000000000
Thread 4: 0xffffff802538d510
0x00007fffdcbc1214
Wire 5: 0xffffff802538abb8
0x00007fffdcbc1214
Mac OS version: 16A 323
Kernel version: kernel Darwin in Version 16.0.0: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64
Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD
Name of system model: MacBookAir7, 2 (Mac-937CB26E2E02BB01)
******************************************************************************** *******
Report Etrecheck
EtreCheck version: 3.0.6 (315)
Report generated 2016-10-05 18:58:11
Download EtreCheck from https://etrecheck.com
Time 02:31
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer restarts
Description:
System of maintains restart with an error "panic (appellant 2 0xffffff8004f7316e cpu)": initproc is out - output namespace 2 subcode 0xa description reason: no ".
MacBook Air (13 inch, early 2015)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir7, 2
1 processor 1.6 GHz Intel Core i5: 2 strands
4 GB RAM not extensible
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 76
Intel HD 6000 graphics card
Color LCD 1440 x 900
macOS Sierra 10.12 (A 16, 323) - since the starting time: 6 hours
SM0256G SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Mac 500 GB internal (disk2) / [Startup]: 505,01 (Go 343,25 free)
Encrypted AES - XTS unlocked
Storage of carrots: disk0s2 250.14 GB Online
Storage of carrots: disk1s2 255,52 GB Online
Card reader Apple
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
~/Library/LaunchAgents/com.example.restart.plist
sh - c ~/Desktop/TarDiskPear.app/Contents/MacOS/TarDiskPear
A unknown file found. [Check files]
/Applications/Kies.app
com.devguru.driver.SamsungACMControl [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungACMData [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungComposite [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
com.devguru.driver.SamsungMTP [no charge] (1.4.31 - SDK 10.5 - 2016-03-01) [Support]
com.devguru.driver.SamsungSerial [no charge] (1.4.31 - 10.6 SDK - 2016-03-01) [Support]
/ Applications/Parallels Desktop.app
com.parallels.kext.hypervisor [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.NetBridge [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.usbconnect [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
com.parallels.kext.vnic [no charge] (11.2.0). 32581 - SDK 10.9-2016-07-24) [Support]
/ Library/Application Support/org.pqrs/Karabiner
[loading] org.pqrs.driver.Karabiner (10.20.0 - 10.11 SDK - 2016-06-19) [Support]
[no charge] 7 tasks Apple
[loading] Apple 168 jobs
tasks of Apple 96 [performance]
[no charge] 40 Apple jobs
[loading] 158 jobs Apple
Apple tasks 105 [performance]
[loaded] com.adobe.AAM.Updater - 1.0.plist (2016-07-15) [Support]
[cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-13) [Support]
[loading] com.google.keystone.agent.plist (2016-08-02) [Support]
[loading] com.oracle.java.Java - Updater.plist (2015-12-25) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-02) [Support]
[loading] com.malwarebytes.HelperTool.plist (2016-09-15) [Support]
[loading] com.microsoft.autoupdate.helpertool.plist (2016-08-03) [Support]
[loading] com.microsoft.office.licensingV2.helper.plist (2016-04-11) [Support]
com.Nalpeiron.NetPro.plist [running] (2016-04-30) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2015-12-25) [Support]
[loaded] org.pqrs.Karabiner.load.plist (2016-06-15) [Support]
[loading] org.wireshark.ChmodBPF.plist (2016-07-15) [Support]
[loading] com.bittorrent.uTorrent.plist (2015-12-26)
[cannot] com.example.restart.plist (2016-07-20)
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)
XMenu application (/ Applications/XMenu.app)
Carabiner application (/ Applications/Karabiner.app)
Hidden Google Chrome application (/ Applications/Google Chrome.app)
Hidden KiesAgent Application (/ Applications/Kies.app/Contents/MacOS/KiesAgent.app)
fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)
AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
QuickTime Plugin: 7.7.3 (2016-09-13)
JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-07) check the version of
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-07-15) [Support]
MeetingJoinPlugin: Unknown - SDK 10.2 (2016-09-28) [Support]
tblive-4: unknown (2016-10-03)
Adblock more - Eyeo GmbH - https://adblockplus.org/ (2016-09-28)
iTube Studio - iSkysoft Studio - http://www.iskysoft.com (2016-07-19)
Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2016-07-24)
Java (2016-08-07) [Support]
Automatic backup: YES
Volumes to back up:
Mac 500 GB internal: disc size: 505,01 GB disc used: 161,76 GB
Destinations:
TOSHIBA EXT [Local]
Total size: 1.00 TB
Total number of backups: 17
An older backup: 24/01/16, 02:55
Last backup: 22/09/16, 17:07
Size of backup drive: adequate
Backup size 1.00 TB > (disc 161,76 GB X 3)
18% Google Chrome Helper (8)
8% WindowServer
6% mdworker (15)
5% of Google Chrome
3% kernel_task
Top of page process of memory: ⓘ
Google Chrome Helper 655 MB (8)
631 MB kernel_task
Mdworker (15) 201 MB
119 MB Google Chrome
Console 111 MB
49MO RAM free
3.95 GB used RAM (647 MB cache)
2 MB used Swap
October 5, 2016, 18:42:55 ~/Library/Logs/DiagnosticReports/QuickLookSatellite_2016-10-05-184255_[redacted] .crash
/ System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. e app/Contents/XPCServices/QuickLookSatellite.xpc/Contents/MacOS/QuickLookSatellit
5 October 2016, 12:43:53 self-test - spent
October 5, 2016, 11:19:17 /Library/Logs/DiagnosticReports/Kernel_2016-10-05-111917_[redacted].panic [details]
October 5, 2016, 11:02:31 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-05-110231_ [redacted].cpu_resource.diag [details]
/ Applications/Microsoft Outlook Outlook.app/Contents/MacOS/Microsoft
October 4, 2016, 14:26:04 /Library/Logs/DiagnosticReports/Kernel_2016-10-04-142604_[redacted].panic [details]
October 4, 2016, 10:31:37 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-04-103137_ [redacted].cpu_resource.diag [details]
3 October 2016, 11:50:06 AM/Library/Logs/DiagnosticReports/Installer Progress_2016-10-03-115006_ [redacted] .crash
com.apple.Installer-Progress-System/Library/CoreServices/installateur Progress.app/Contents/MacOS/Installer progress
3 October 2016, 08:23:05 AM/Library/Logs/DiagnosticReports/Microsoft Outlook_2016-10-03-082305_ [redacted].cpu_resource.diag [details]
3 October 2016, 08:05:42 /Library/Logs/DiagnosticReports/Kernel_2016-10-03-080542_[redacted].panic [details]
October 1, 2016, 01:05:15 /Library/Logs/DiagnosticReports/Kernel_2016-10-01-010515_[redacted].panic [details]
September 30, 2016, 11:49:17 /Library/Logs/DiagnosticReports/Kernel_2016-09-30-114917_[redacted].panic [details]
September 28, 2016, 18:13:50 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-181350_[redacted].panic [details]
September 28, 2016, 10:03:09 /Library/Logs/DiagnosticReports/Kernel_2016-09-28-100309_[redacted].panic [details]
If you have Bluetooth enabled, turn it off before going to sleep the computer.
-
MacBook Pro crashed after loading the Sierra
Charge of Sierra (September 22, 2016) on my MacBook Pro (early 2011) and now it crashes. The computer was working fine before the update. Can I cancel the new operating system or how can I fix the problem?
Difficulty installing Sierra
Try each of them in order. A test to see if the computer works properly:
- Reset the PRAM
- Reset the controller (SMC) system management
- Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
- Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side. Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
- Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
-
Random OS freeze or crash after the Upgrade of the Sierra
Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.
In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.
I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.
The other answer is a hard reset by holding down the power until button a restart is forced.
I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.
I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple
The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.
EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.
Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.
In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.
Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?
-
iMovie crashes after update of the Sierra
I use a Macbook Pro of the retina from the end of 2014, 2.2 GHz Intel Core i7 Processor, memory DDR3 16 GB 1600 MHz with 398 GB of available storage.
I'm running iMovie Version 10.1.1.
Today, I upgraded to OSX Sierra without any problem. I edit a very short time (16 seconds) movie and trying to export, the application crashed. I tried exporting as a file, export to the theatre and many other methods, but as soon as I chose a method of export, the application crashed.
I tried to turn off the computer and it has not changed.
It's maybe just a bug, and you may need to wait for an update until it is fixed. What you can try is a clean reinstall of the Sierra of MacOS.
-
Messages in the Sierra have not upgraded
I upgraded to Sierra and my messages app have not improved. It's always the old version with all the names of the contact of my conversations replaced with their phone numbers. If I try and type a name to add a contact on a new message, the application crashes.
When I look at the modification date of the application in the application folder says 'may 7, 2012', so that all my other wealthy apps goes back to the year underway (2016). I tried to reinstall Sierra again without change.
Please let me know if anyone knows how to solve this problem.
Thank you!
Save a backup copy of your Messages application on a USB key, and then delete the Messages from your Applications folder on your Mac. He may request a username/password admin name. Don't forget to empty the trash after that. Then, try to reinstall the Sierra again and see if that does not copy the new Messages on your Mac application. If something goes wrong, you always have your initial request of Messages and can be replaced from the flash drive.
-
Some keys stop working after the update of the Sierra (only for a specific profile)
After update to Sierra my keyboard worked well for a while. But at random, U I O P J K L keys stopped working.
The bug only shows 1 profile. If I create another profile new profile keyboard works very well.
Anyone know what that sometimes caused that and with the fix is?
Hello ExcelsiorPath,
After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed. I recommend you to read this article, it may be able to help solve the problem.
If the other keys do not work
You may have accidentally set an option that changes your keyboard works.
Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.
Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.
Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.
To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."
macOS Sierra: If your keyboard does not work
Thank you for using communities of Apple Support. Good day.
-
How can I download pages for el capitan? Only the version of the sierra is available on app store.
Hello
I already bought Apple Pages and Numbers for use on an iMac running El Capitan. Now I upgraded my macbook pro to El Capitan and want to update these programs, but on the App Store, I am only offered a newer version, which requires the Sierra. How can I get the version I need? Thank you, Robert
Have you tried clicking on the icon in the Mac App Store to see what is happening? In the past, the Mac App Store will say that version will not run on your operating system & offer to download the latest compatible version. I don't think this has changed, but I don't have a Mac in El Capitan to try.
-
Why is my mail account crashes all the time.
My e-mail account on my Mac seems to hang a lot more recent. Do not know why. I did not change my account. I get a message from crash to re - open and all is good for a little while until I get the same message again.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, clear the search box, and then select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
OS X Yosemite / 10.10.5 / 2.7 GHz/8 GB 100 MHz DDR3 / 999,35 GB of capacity (890.43 is used)
Start the computer to crash last week at least once a day. No changes were made to the system in addition to 3 months. Most of the accidents of time occurred when Safari (yahoo) was the only program running (about 3 tabs were open and videos were not viewed). Here's the report of EtreCheck I fell a few minutes ago (only Safari was launched while being worked, other programs were so-called closed - oddly, it seems that passed was open, but it wasn't). Why the report shows that virtually all of the RAM is used to the top?
EtreCheck version: 2.9.10 (261)
Report generated 2016-03-16 17:41:25
Download EtreCheck from https://etrecheck.com
Running time 01:35
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer restarts
iMac (21.5 inch, at the end of 2013)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac14, 1
1 2.7 GHz Intel Core i5 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n/ac
Iris Pro Intel
iMac, 1920 x 1080
OS X Yosemite 10.10.5 (14F1605) - since startup time: less than an hour
HTS541010A9E662 disk HARD APPLE disk0: (1 TB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 999,35 go-go (890,45 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
~/Library/application support/transmission/transmission Disk.app
com.panic.TransmitDisk.transmitdiskfs [no charge] (4.0.0 - 10.6 SDK - 2015-02-09) [Support]
[loaded] 5 tasks of Apple
[loading] 146 tasks Apple
[operation] 61 tasks Apple
[loaded] 45 tasks Apple
[loading] 142 tasks Apple
[operation] 77 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-03-14) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-16) [Support]
[failure] com.adobe.AdobeCreativeCloud.plist (2016-02-11) [Support]
[loading] com.google.keystone.agent.plist (2016-03-02) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-16) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-16) [Support]
[loading] com.adobe.SwitchBoard.plist (2015-02-05) [Support]
[operation] com.adobe.adobeupdatedaemon.plist (2016-02-14) [Support]
[loading] com.adobe.agsservice.plist (2015-09-24) [Support]
[loading] com.adobe.fpsaud.plist (2016-03-07) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-02) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2014-01-09) [Support]
[loading] com.adobe.ARM. [...]. plist (2015-02-05) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
TransmitMenu Application (~ / Desktop/Transmit.app/Contents/MacOS/TransmitMenu.app)
Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)
[ongoing] com.etresoft.EtreCheck.192300
[ongoing] com.panic.Transmit.TransmitMenu.68192
[loading] 373 tasks Apple
[operation] 160 tasks Apple
AdobeExManDetect: AdobeExManDetect 1.1.0.0 - SDK 10.7 (2015-02-05) [Support]
AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-02-14) [Support]
QuickTime Plugin: 7.7.3 (2016-02-05)
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-08) [Support]
Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-08) [Support]
Default browser: 600 - SDK 10.10 (2015-08-20)
FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-10) [Support]
PepperFlashPlayer: 21.0.0.182 - SDK 10.6 (2016-03-12) [Support]
Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-05) [Support]
JavaAppletPlugin: 15.0.0 - 10.10 (2015-02-05) check the version of the SDK
Flash Player (2016-03-07) [Support]
Time Machine not configured!
4% WindowServer
3% fontd
kernel_task 2%
hidd 0%
0% dock
Top of page process of memory: ⓘ
652 MB kernel_task
557 MB com.apple.WebKit.WebContent (3)
Mdworker (6) 229 MB
Mds_stores 164 MB
Safari of 106 MB
834 MB of free RAM
7.18 GB used RAM (3.29 GB being cached)
Used Swap 0 B
16 March 2016, 16:54:10 self-test - spent
March 14, 2016, 17:36:41 ~/Library/Logs/DiagnosticReports/Google Earth_2016-03-14-173641_ [redacted] .crash
com Google.GoogleEarthPlus - Earth.app/Contents/MacOS/Google Users/USER/Desktop/Google Earth
March 11, 2016, 12:23:32 AM /Library/Logs/DiagnosticReports/Kernel_2016-03-11-002332_[redacted].panic [details]
These must be run as administrator. If you have only one user account, you are the administrator.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSIS AND diagnostic USE information reports ▹ System
(not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report.
I know that the report is long, perhaps several hundred lines. Please report all this anyway.
When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Mail crashes when the address begins with 'j '.
Hello
When I opened a new mailwindow in AppleMail and start typing that address whitch starts with the letter j, the program crashes.
Any other letter works very well.
It is possibel to trigger the crash over and over again.
So far, only solution is to copy and paste the address.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, clear the search box, and then select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Safari does not start, or crashes on the selection
My Safari now plays too much upward. It does not start at all. Hangs on the selection, with the message that "Safari quit unexpectedly. " Click open to open the application again. This report will be sent to Apple. "I'm using now Firefox - I studied several sites and other problems of sounding similar, deleted the files they suggest, allowed, caches, cookies, removed 3rd party software, (I think it's where my problem started this afternoon, my mobile phone operator, Vodacom detailed billing report requires the software titled 'ecrypt' for open invoices, and started crashing when I tried to open a.) I eventually trashed the software, but to no avail...) and did what you suggested to the person above. I got the following results:
Step 1. I signed out and signed him as a guest - user will understand - works Safari very well! Then I logged as Clive Lake, and it crashed immediately, would not start or start and with the same message...
Step 2. I rebooted in safe mode after unplugging all devices: No go I'm afraid... I tried several times and I'm actually still in safe mode.
It would seem that something I did in my profile caused the problem.
Any advice about where to go from here would be appreciated.
Concerning
Clive L.
iMac (21.5 inch, at the end of 2013)
OS X v10.11.1
3.1 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 1024Mo
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).
Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSIS AND diagnostic USE information reports ▹ user
(not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
I know that the report is long, perhaps several hundred lines. Please report all this anyway.
If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report - they are very long and rarely useful.
When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Upgrade of the Sierra: where are my pictures!
Well, I see that a lot of people have this problem but have yet to find an answer to the problem anywhere. My patience is lost, I despise the fact that I have * money on shit Apple but I need to find my photos. Stupidly, I'm fallen for Apple BS again and "upgraded" in the Sierra. Now all my photos and the Organization, that I spent a year are no longer accessible by something else as well as the new 'Photos '. I never had iPhoto first, never used. Each thread simple discussion I can find guard speaks of iPhoto and animated for the Photos news images. I can see the picture files, but all my organization has disappeared; and I can't access my photos of any other application EXCEPT Photos! If I could find an Apple exec I would slam their face until they cried!
Someone has a REAL solution to get my photos and the Organization in the way it was before this stupid OS Sierra update?
< re-titled by host >
I think you should be able to find your photos here ~/Pictures/Photos Library.photoslibrary.
Presumably, you could also restore your library and its organization of your backup so that you can continue to use any photo library program you usually use.
-
My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.
Time Machine backup to a sparsebundle.
The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.
Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...
You has of course set the exclusion in Time Machine?
By default, Time Machine will exclude your second drive unless you have included it. Did you?
Once you get to this level during the backup, you can do a full restore manually whenever you want.
Maybe you are looking for
-
HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.
I have a HP pavilion G4, Windows 7. Keyboard stopped working and Wifi off, cannot turn on the wireless device. I use a keyboard usb type, but has no a wireless on/off button. I tried F12, ctrl + F12 or Alt + F12, etc. without effect. I tried the key
-
Mouse magic disconnection since 10.11.2 upgrade
Since the update of this week OSX, my Magic Mouse disconnects frequently Bluetooth. Was working fine before. Have changed batteries. Removed and re-paired, but still the problem persists. Seems to be triggered by the use of the extended screen - when
-
Everyone was able to solve the driver problem in laptop LENOVO U410 of windows 8?
My bluetooth does not work. I downloaded this software But my bluetooth option looks like this Someone had this problem? No touchscreen laptop of LENOVO U410. WIndows 8.
-
Games - Assassin Creed (original) - do I need a new graphics card?
Information:I just bought the original Assassin's Creed game for my new computor (2 months).However, the videos feature a shift of the audio-video and the gameplay is very slow.After verification of the automatic system of the game, my computor has a
-
I had to reinstall windows xp on my computer. After that I finally got on it now says it can't find an internet connection. I have a House on a wired network with a router and modem centeral. cables and connections are all good, and I was online w