numbers repetidos such en

Similar Questions

• When I subtract two numbers DBL and try to compare the result with another DBL, it fails

  I found a curious problem with subtraction and compare numbers DBL in LabVIEW (8.6). Here's how it works:

  1. subtract two numbers DBL such that the result is not incorporated. (Say, 3.2 - 3.1)

  2. compare the result with a constant/control that is on the result of the subtraction (in the example, 0.1)

  3 see the output of the comparison.

  If the result of the subtraction is an integer, the Boolean result is (as expected). If the result is not complete, the comparison fails.

  (Now, if I simply compare two floating point numbers, it works, so the issue is not with the node comparison itself, but with the data that is entered to the node). Can someone understand why this happens? It's unexpected, it's a pretty serious bug.

  It is provided with all programming languages. Numbers do not have an exact binary floating-point representation. This has been discussed endlessly. Never use the equal function with floats. You can use the function in the range and force.

• my previous session restore crashed

  my previous session restore crashed because I opened firefox and he did not answer, so I ended its process through the Task Manager, how to restore cache.trashxxxx file in the cache folder so next time I open the Fire Fox my last session opens again?
  I tried to copy the content to the hidden folder, but it moves just in a new folder cach.trash

  any way to help me?? i had so many important tabs open
  

  Well, before you open/close Firefox again:

  Your tabs and windows of session are stored in a file named sessionstore.js, not in the cache.

  Use the start menu in Windows, the search box or run it, type or paste the following and press ENTER:

  %APPDATA%\Mozilla\Firefox\Profiles
  

  If you see only a single folder (semi-aleatoric name), click in it and save all these files to a secure location (if you see more than one such folder, check the files into it and save the most recent):

  sessionstore.js
  sessionstore.bak
  sessionstore.bak-datetime
  

  If you find that all numbered files such that the following back, those too:

  sessionstore-1.js
  

  If you do not see the .js extensions, clear the Windows feature that hides them. See: http://support.microsoft.com/kb/865219

  You will find all the files from the time where you want to restore?

• Support ID3 tag to determine the order of play

  Hello

  I read about the problems, the Clip has in getting the correct reading order, for example here, but I can't seem to make it work. Audiobook mp3s are labeled with ID3v1.1, ID3v2.3. I tried to use Mp3tag to set the ID3v2.3 to ISO-8859-1. All files have the same name of Album, athletics # a value XXX/YYY (ex: 001/145) for ID3v2.3 and 1, 2, 3... 145 for ID3v1.1. Title tags are on 'Track 001', «track 002"...»

  I can't understand why the files do not play in order...    Anyone have any ideas?  (except using playlist, because I won't be forced using that)

  Does anyone have any idea on when this new version of the firmware (which is supposed to solve these problems) is to come?  Someone wrote a few weeks it would probably come out in a few weeks ago...

  Sincerely,

  Carl

  P.S. If Sandisk won't spend enough money to keep the amount of programmers needed to produce firmware quickly and efficiently, perhaps Sandisk should consider assisting people to Rockbox on so that users with higher applications can use their software instead. I understand that Sandisk is not a) distribute detailed information on everything about their players and b) vouch for the security/stability of Rockbox. But it doesn't have to be a problem. SanDisk could leave small fractions of the information (which is necessary for Rockbox crew clear some obstacles) and Sandisk could also say that 'we cannot guarantee that any other firmware that ours will work with our players and if you use a different firmware, for example Rockbox Sandisk warranty sucks." It's all good - as long as those of us who have demands more high on firmware get a solution that responds to that!  I think of things like the id3 support to reading to work order and the ability to adjust different parameters, for example the speed of the titles of the songs that are too wide for display.

  Hello again,

  After countless hours of research and testing, I now realized in the order in which the Clip plays the tracks when using firmware 02.01.16 (I really hope a new firmware that corrects these problems is available soon, as promised).

  As has been set out in the thread I linked at the earliest:

  When no id3v2 tag is present, the titles are sorted by sequence numbers rightmost in the name of the file.

  However, I used id3v2.3 tag to ISO, as is the recommended version that the firmware currently supports a little OK. The problem I had, however, was that I used numbers track such as "001/145" and not only "001". Now, according to id3.org, using a character ' / ' followed by a string of numbers to indicate the size of the entire securities is valid standard id3v2.3 - but obviously the Clip doesn't respect that. I hope that this is also fixed with the next version of the firmware.

  Kind regards

  Carl

  P.S., Why should I do research/test so to find something as simple as that? Where is the complete guide, published by Sandisk, which covers these things? Here again, questions such as these id3 problems should have be fixed early on (making the chapter in the guide on relatively short tracks sorting).

  P.P.S. I was serious about the suggestion of Rockbox: thinking outside the box! Provide assistance to the crew of Rockbox, without revealing a lot of sensitive information (trade secrets), and without having to officially support Rockbox should be possible - and that would be actually a selling point to many users who want to buy a mp3 player which allows more freedom of choice. Dare to be different!

  [edit: I put this thread as "Resolved", even if the underlying problem (the clip tag id3 support) is far from solved.]

• The traffic is not correctly distributed through each link of etherchannel.

  Dear team,

  You can all have a clue on below.

  I have a cisco 3560 and created the port-channel switch and assign the port two to Po1 switch is connected to the HP VC.

  The question is highly uses a single port and on the other port no traffic is there.

  Please find below the config for your reference.

  Cisco 3560

  Switch1 #sh su etherchannel

  Flags: - Low P - D bundled in port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - running f - cannot allocate an aggregator

  M - don't use, minimum contacts not satisfied

  u - unfit to tied selling

  w waiting to be aggregated

  d default port

  Number of channels in use: 4

  Number of aggregators: 4

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-----------------------------------------------

  1 Po1 (SU) LACP Gi0/28 (P) Gi0/30 (P)

  2 Po2 (SU) - Gi0/22 (P) Gi0/23 (P) Gi0/24 (P)

  Gi0/25 (P) Gi0/26 (P) Gi0/27 (P)

  3 Po3 (SU) - Gi0/6 (P) Gi0/7 (P) Gi0/8 (P)

  Gi0/9 (P) Gi0/10 (P) Gi0/11 (P)

  4 (SU) Po4 - Gi0/1 (P) Gi0/14 (P)

  #sh Switch1 run int po1

  Building configuration...

  Current configuration: 166 bytes

  !

  Interface Port - Channel 1

  Description HP VC

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlanXXXX

  switchport mode trunk

  end

  #sh Switch1 run int g0/28

  Building configuration...

  Current configuration: 223 bytes

  !

  interface GigabitEthernet0/28

  Server HP VC Description

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan XXXX

  switchport mode trunk

  channel-protocol lacp

  active in mode channel-group 1

  end

  #sh Switch1 run int g0/30

  Building configuration...

  Current configuration: 223 bytes

  !

  interface GigabitEthernet0/30

  Server HP VC Description

  switchport trunk encapsulation dot1q

  switchport trunk allowed vlan XXXX

  switchport mode trunk

  channel-protocol lacp

  active in mode channel-group 1

  end

  Switch1 #.

  Kind regards

  Prasad

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose.  Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

   

  If you see a load imbalance to THE switch (i.e. from your server), then you should see if your server has any load balancing options like the switch has no control over this.

  If you see load imbalance OF switch (IE your server), then your need to select the best hash algorithm, for your traffic load balancing features.  Often by default of the switch is not the best.  Often using IP source and destination addresses works well.

  Sometimes, realize that the switch does not offer a good hash algorithm for your traffic for load balancing.  For example, if the majority of your traffic was between two hosts (replication, for example), all the traffic that would take the same link.  (Note: a hash of 6500 offers which includes port numbers for such situations, but not 3K switches.)

  This link http://www.cisco.com/c/en/us/support/docs/lan-switching/etherchannel/12023-4.html, explains your choices on different Cisco switches.

• Checkboxes and variables in variable names?

  I'm not sure that the title is too clear to what I'm looking for so I'll clarify.

  Normally, I try to use Google ninja skills to understand this point, but I can't seem to find the answer anywhere.

  First of all, the problem is that if a checkbox is disabled, its value is set to 'Off '. If I could change that to '0' it save me a lot of trouble. Currently I have the checked the value "1" value

  I also want to clarify that I am a relative novice when it comes to java, although I've fiddled with Lua and Ruby in the past, the program logic is a logic for me. But excuse me for flagrant fouls or shortcuts that I might be on.

  The question is simple. If none of the 5 boxes are ticked, I want the total cumulative value to be positive.

  

  That's what I work with, making it an interactive D & D character sheet for me and a few friends. Was supposed to make life easier on paper, but now it's a personal challenge.

  Numbered / appear as follows (Skill) S_ [for example, expertise, Bluff, etc.], a skill modifier. In the case of this image, the relevant Mod is INT. Then we have the boxes of the jurisdiction. Due to there are over 40 skills, with up to 5 classes, I opted to use the copy function to analyze Multiple out them for me. They were numbered as such. 1.n.i, "n" being the 'i' being the column and row. The two starting at zero. (1.0.0 1.0.1 1.0.2 1.0.3 1.0.4) Then the following line for the Bluff. 1.1.0 1.1.1 etc..) Then, we have invested in the skills of ranks. Ranks.n (once again. "n" being the largest). Then RFS.n and Misc.n. Same logic. And, if so worth checking out of the armor that is universal. There is also the factor whether the skill can be used without training or not.

  The question I have, is that if one of the 5 boxes are checked, ranks are worth all the points. If this is not the case, they only worth half. But since I can't get all the boxes to 5 check equal to '0' when harvested, I just get a trace of 'OffOffOffOffOff '.

  I found a little. But I don't think that's anywhere near enough good. Variables in the code are met through this example for expertise.

  Current line

  var n = 0

  Enter untrained use True/Fall

  untrained var = True

  Armor check penalty applies? True/false

  var acp = False

  Synergy of skills? True/false

  var ss = False

  List of variables

  var address = this.getField("INT").value;      change the value of capacity (INT, STR, etc.) since the jurisdiction dictates.

  class = this.getField("Ranks.0").value var; Is there a way to simplify this with the line variable. As this.getField("Ranks."_+_n).value; type of transaction? This is where variables in the names.

  RFS var = this.getField("RFS.0").value;

  var Misc = this.getField("Misc.0").value;

  Check the boxes

  check var = this.getField("1.0.0").value + this.getField("1.0.1").value + this.getField("1.0.2").value + this.getField("1.0.3").value + this.getField ("1.0.4") .value;

  Would like to simplify this in a smaller check. Perhaps a 'for i = 0.4 do' loop or something? Once again, the variables in the names. I also share the '0' in 1.0.i to "n" if possible.

  Synergy

  synergy var = 0

  If (ss = true) {}

  Copy Start Here if more the skill of a synergy

  If (this.getField("skillNameRank").value > 5) {/ / replace skillNameRank by appropriate call.} Ex. Bluff has a rank of "Rank.1".

  synergy synergy + 2 = var;

  } else {}

  synergy synergy + 0 = var;

  }

  End copy here

  }

  Calculate for skill Bonus

  If (untrained == False) {}

  Event.Value = 0

  } else {}

  If (check > 0) {}

  competent var = 1

  } else {}

  competent var = 2

  }

  If (acp == True) {}

  var acPenalty = this.getField("ACP").value

  } else {}

  var acPenalty = 0

  }

  Skills = Event.Value + (rows / competent) rfs synergy + misc - acPenalty;

  }

  As you can see. This implementation across more than 40 different skills would get tedious if I go well and change all references of variables for each a loner. So I'll try to simplify. For some relevant variables for each of the competencies. Which, in more complicated with limited knowledge seems finally be the best route to look in. I tried to do this as clearly as possible to limit the possible error of misinterpretation room giving a clear understanding of what I want and what I use it for.

  Please, if you respond to this with corrections or additional code, let me know what and why so I could implement and understand it is better in the future. If you ave to the questions, I will try to provide the answer to the best of my ability.

  Even the greatest tools in the world are but hunks of metal for those who do not know how to use it. But the simplest tools can create a masterpiece of one who knows exactly what to do.

  -It is not possible to change the default "Off" value of a checkbox.

  -To include a variable in the name of a field that you use the operator +. For example:

  this.getField (n + ".") 0.' + i)

  -To convert a value to a number use the Number() constructor. This will convert undetermined strings (like "Off") to zero.

  -You have a lot of problems with your code. For example:

  * You use the assignment operator (=) instead of the comparison operator (==) in your if statements.

  * Your values Boolean (True, False) are incorrect. JS case-sensitive, you must ensure that you use the correct spelling of things.

  I recommend that spend you the time learning the syntax of basic-JS. This will make it easier to develop your script of Acrobat.

  See for information about base-JS: http://www.w3schools.com/js/default.asp

  https://developer.Mozilla.org/en-us/docs/Web/JavaScript/reference

• Question about the use of the memory of the host and the VM memory limit.

  Well, I have so vCenter PAHO running in my environment.  My host started to have a little low on available memory and the server of the OPs was the biggest pig, so I thought I could try to corral it a little.  Here is some info documents and help than I thought.

  ESX host has pointed out, looking at the level of the ops vc server:

  Host of Mem - MB: 7364

  Guest member - %: 3

  With the virtual machine has highlighted:

  Consommé of host MB memory: 7378

  Client active memory: 573 MB

  So I understand these numbers as such: the memory of the host is the amount of physical memory that has been allocated to the vm, and the memory of comments is the amount of memory allocated is really active in the guest operating system being used by the process.  Please correct me if I'm wrong.

  My solution was to set a limit on this virtual machine with 4 GB of memory, freeing up about 3 GB of memory to the host, but after the change is made, consumed host memory never came down.

  What Miss me?  Thanks in advance for the help.

  I understand that. Can you turn off this guy and turn on the power?

  Follow me @ Cloud - Buddy.com

• I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s

  I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s why? I just brought a new phone and restore from backup, but after the restoration of my new devices I don't see it.and I pick up on the app store and its application to pay... its happened... there please help me anyone... Thanks in advance

  new phone iphone 6s 128 GB

  iOS 9.2.3

  Are you logged in using the same as before Apple ID? Under the "iTunes and App Store", you can check in the settings menu.

• Type the numbers 1, 2, 9 and 0 in a website form such as when you create a new note in Evernote web, Firefox jumps to another tab or change the font size.

  In some forms of web (e.g. What strikes a new note in Evernote Web), I can't type the numbers 1, 2, 6, 9, or 0. Typing '1' or '2' jumps out to an another changes in typing "9" or "0" tab open the font size. Type '6' does nothing I can see easily.

  I use OS X 10.9.5 and Firefox 38.0.1. I think that this problem was introduced with Firefox 37, if I'm not completely sure.

  Problem solved. It is the extension of the key configuration.

• See the list of numbers such as "call number?

  I've added a menu to MENUITEM_ADDRESSBOOK_LIST and I'm looking to display the dialog box "Call what number?" as BlackBerry does for contact with many numbers.

  Do I have to use Dialog.ask or a class exist?

  1. open address book

  2. Select a contact with a lot of numbers

  3. click on the BlackBerry button and then click< call="" xyz="">

  4 blackBerry open a dialog box to select the number

  Thanks in advance :-)

  Finally, it works:

  Synchronized (application.getEventLock ())
  {
  UiEngine objUI = Ui.getUiEngine ();
  Screen ObjScreen = new dialog box ("Call number?", strLabels, intIndexes, 0, Bitmap.getPredefinedBitmap (Bitmap.INFORMATION), Manager.VERTICAL_SCROLL);
  objUI.pushGlobalScreen (objScreen, 1, UiEngine.GLOBAL_MODAL);
  i = ((Dialog) objScreen) .getSelectedValue ();
  }

  I changed the UiEngine.GLOBAL_QUEUE to UiEngine.GLOBAL_MODAL to wait for the choice of a number.

  Mount the objScreen dialogue, and then use the getSelectedValue() method.

  Thank you very much :-)

• How to set the {} num.currency such way that it will display "-" sign for negative numbers instead of "()".

  Hi people from Adobe,.

  I am working on a form of invoice of Adobe, where currency a few fields may show as "-" if it is the negative number.

  I use display model num.currency {}, but its poster ($1,234,567.89), I want to display in the form $-1,234,567.89

  Is someone can you please let me know how to achieve this.

  

  

  Hello

  I wondered if it would be that simple.  It seems that the United States and Hong Kong are the only ones who use the media for negative numbers.  The Australian currency displayed as you wish.  Maybe you can go into the XML Source and change the line $z, zz9.99 | () $z, zz9.99) $z , zz9.99.  This is how the Australian looks... would need a few tests well.

  Or maybe you can have the hidden decimal field and display a text field with a calculation as DecimalField.formattedValue.replace(/[()]/g,"");. " Do you need to align the decimal points?

  Bruce

• How can I reset Thunderbird so that information such as numbers of messages, etc. on the lower part of the window?

  All the information at the bottom of the window to Inbox disappeared as the number of messages, and answer in advance.

  Is Thunderbird these days have a status bar? If so, you could press Alt to see the menu bar, choose View > toolbars and check status bar.

• I recently had to replace my iPhone 6.  I can't store contact information, such as names and phone numbers.  I enter all the information and click Save.  Then go back and contact is not there

  I can't store the information under telephone contacts.  I enter information and press on save, but go back and contact is not there

  Is - this with iOS 5.0.1 and 4 s?

• When the export file .docx for .pdf on iMac functions (such as numbers, page references) are static text display - error?

  When I try to export a .docx in .pdf formatting is displayed based on the original field. Rather than show any number of page of the pdf shows "{PAGE}", for example.

  I work with Word to Office 365 on an iMac with OS X El Capitan.

  Any help? Why is it not possible to create a good ISO pdf / a file?

  OK, in my opinion, there is a setting in Word Printing Options. It will vary with the version of Word, here's an example https://support.microsoft.com/en-us/kb/326503

  Creation of PDF files will use a printing technology and can be affected by some of the same settings.

• 5.6.2 faced with hierarchy of pages numbered titles

  There is more old similar topic, but years later, I hope that they are resolved. I have a couple of documents (even several manuscripts of the book) that has become messy spend 9 Pages...

  Next to the inserted images, this is the numbering of the items, especially the numbers at several levels. As it seems a numbering format is not stored with the paragraph style? Why is this?

  A new document, I can create a numbering on several levels on existing ones, it seems impossible to add a new chapter - no copy and paste existing paragraphs or something else seems to help. It shows simply no number of bleachers, she even continues no precedent. And all this because we are fighting for the same functionality on iOS than on OSX - understood this. But after so many years in should work now, shouldn't it? Applications such as iMODELER work seamlessly online on any device.

  5 pages for Mac should meet the minimum standards that Apple set to the version of iOS.

  To do this, they did not bother with more than 120 missing features and made a really bad choice of user interface string.

  Once it is out raspberry resounding from users because their work was sacked without warning, my guess is that Apple has lost interest and he shelved and nobody would be the owner of the donkey when there were much more interesting jobs in iOS.

  Apple has decided to give free 5 Pages, and it is the value ($0) they have placed on it since then.

  Apple is not responsible for the iModeler otherwise it would be too much like 5 Pages.

  Peter