Nvhotkey.DDL missing at startup

Similar Questions

• error in ms01ary.dll missing during startup

  error in ms01ary.dll missing during startup

  Hi TonyMagsino,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  
  Method 1: Enable the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Installed Indesign CC 2015 and claims many plugins missing at startup

  Installed Indesign CC 2015 and claims many plugins missing at startup

  Choose about InDesign from the Help menu (Windows) or InDesign menu (Mac). You may have launched a previous version of InDesign and try to open an existing InDesign file.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• The Mglsinp.dll file is missing at startup

  original title: whenever I reboot my Windows Vista system, I get a message that the file Mglsinp.dll is missing.  Is there a way to download this file?

  The error message is displayed when the reboot is almost finished.  I ran a registry repair program and it did not help.

  Hello

  registry cleaners are no although it is

  Google has nothing of "Mglsinp.dll".

  but for "mgls.dll.

  http://www.ProcessLibrary.com/directory/files/mgls/458090/

  Try, follow these steps

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How can I fix run dll missing at startup

  c:\users\walt\appdata\local\temp\rqrrrp.dll

  Next time please quote the error message exactly. I can't tell from your post if the error indicates that this file is missing or if it is said that there is a problem with the file, etc. This is important.

  In all cases, it is a malicious program file. If you get the message that this file is missing, or you have uninstalled the malware program or your antivirus/antispyware program. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware (or if the message is something other that the file is missing), the chances are too high you had others and you need to analyze. I recommend to download and install MalwareBytes' anti-malware (MBAM) fromhttp://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware). For the more detailed procedure, seehttp://www.elephantboycomputers.com/page2.html#Removing_Malware

  Manage startup (be sure to make the malware analysis first!):

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista/Win7 it will be blocked by Windows Defender and you will need to enable it to run so that you can check the box that says, 'don't mind not on this topic again.

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• Getting the error for MSVCR71.dll missing at startup of windows

  Before you install a new HP printer, I uninstalled the old printer software. Since then, whenever I start my computer I get the following error message "the program can't start because MSVCR71.dll is missing on your computer. Try reinstalling the program to fix the problem. "I tried to find solutions online without success. Thanks for the help.

  Original title: MSVCR71dll is missing

  Hi John,.

  Thanks for the update on this issue and I apologize for the delay in response.

  1. you have a Windows 7 installation/repair DVD?

  It seems that there is a corrupt program that is running in the background and the origin of this error message to the pop-up window. I recommend that you perform the clean boot again and do not start the computer in normal mode. But try to launch all the necessary applications you need.

  Clean Boot WARNING: putting your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Please reply with details if the problem persists.

• Partition missing at startup Bootcamp

  I have a Mid 2012 Macbook Pro and I can't seem to be able to start on my Windows partition. I've been running Windows 10 (Windows 7 Pro upgrade) on a 1 TB HARD drive. This problem only comes to happen, after starting to install Bootcamp on another SSD installed in my optical Bay. List of events:

  1. Replace my optical drive with an SSD using an Optibay MSE adapter
  2. Winclone to create an image of my current bootcamp partition
  3. Downloaded an ISO of Windows 10 image on my bootcamp partition
  4. The Boot Camp Assistant, used to create a Setup disk with the drivers on a USB key is empty
  5. Wizard Boot Camp, trying to install Windows 10 on the new SSD
  6. Installation is complete, but on reboot, started to black white screen
  7. Attempt to restart and booted to a black screen with flashing underscore concerns
  8. Initialized to Mac and shaped something was not right, so reformatted the new SSD to FAT
  9. Tried to boot into the old partition Boot camp, only to start on white screen
  10. Disconnected from other SSDS, as suspected, he was causing problems (do not do anything)
  11. Attempt to restore the winclone image of old partition backup
  12. Winclone restoration resulted in creating an EFI disc, as well as what looks like my old drive BOOTCAMP.
  13. Tried to restart in the TRAINING camp from boot disk, which brings me to a black screen with flashing line of underscore.

  This brings me to now. I have the feeling that I messed up the partition table. When you hold the option at boot, I am only offered Macintosh HD, EFI startup and recovery - 10.10. Any idea what I can do to successfully start windows?

  chke wrote:

  Wizard Boot Camp, trying to install Windows 10 on the new SSD

  Installation is complete, but on reboot, started to black white screen

  Windows Setup requires several reboots. Did the restart to complete it successfully? The pilots of the BC did install correctly?

  Installation is complete, but on reboot, started to black white screen

  Attempt to restart and booted to a black screen with flashing underscore concerns

  EFI boot that is used to install on the SSD drive? Your subsequent statement on EFI boot indicates that is the case, but need to confirm.

  Initialized to Mac and shaped something was not right, so reformatted the new SSD to FAT

  Tried to boot into the old partition Boot camp, only to start on white screen

  What is expected. Each disc has it's own independent EFI. BCA is updating the EFI to disk0, pointing to the SSD, which deleted you. It is impossible to boot EFI Windows since the 1 TB HARD drive. BIOS/MBR is a completely different path.

  Disconnected from other SSDS, as suspected, he was causing problems (do not do anything)

  What is still expected. See previous explanation.

  Attempt to restore the winclone image of old partition backup
  Winclone restoration resulted in creating an EFI disc, as well as what looks like my old drive BOOTCAMP.

  Winclone has the ability to restore EFI or MBR. It depends on the model. Your specific model supports both approaches. You can check this by using the Applications-> utilities-> Console and type "Winclone' at the top of the search page to the right area, then check the logs. She restored EFI, which is why you see Boot EFI when using Alt/Opt.

  Tried to restart in the TRAINING camp from boot disk, which brings me to a black screen with flashing line of underscore.

  This because EFI boot is now the problems causing the GPU. Yours is a 13 inch or a MBP 15 - in?

• Cursor missing at startup

  Currently running OS X El Capitan, and have noticed recently that from time to time at startup that my mouse cursor disappears completely – making it impossible to click on anything whatsoever

  Any ideas on how to solve this problem? The keyboard works fine and the connection, the cursor jumps back as usual.

  in some rare cases, I have the same problem on the logon screen.

  Try to select your personal account with the arrow keys, and then click the back button.

  When I do that, finally on the desktop, the mouse cursor appears.

  Greetings from the Germany

  Chris

• File missing at startup - Equium M70

  Satellite M70 - 173 model PSM77E is 8 months old and has a recurring problem at startup.
  "\Windows\system32\config\system" message after the self test screen and the boot process stops.

  I have made several product recovery operations but the blame inevitably sooner or later. Support PC world just takes me by the recovery of product but will not lift the machine due to software problem claimed.
  Any ideas what is the cause? My son needs the PC when it starts to uni in a few weeks!

  HELLO Terry,

  This sounds a if your hard drive is a failure. When you reinstall the operating system recovery CD, the files are always written to the same area of the hard drive, and I suspect that's why the recurrent guard problem.

  I suggest that you take a safe backup of your own data and then run a CHKDSK command on your hard drive to see if you have bad sectors. Ideally I replace the hard drive (or be replaced under warranty).

  Kind regards

• MgUpdateSupport.dll missing at startup

  my computer has problems early and closing told me miss me MgUpdateSupport.dll, how to fix this?

  Hello

  -What operating system is installed on your computer?
  -Don't you make changes to your computer because of which the question began?

  mgupdatesupport.dll is an unknown process. It can be found in the location C:\Program Files\macrogaming\sweetim.mgupdatesupport.dll is a potential security risk which can be modified maliciously by virus. mgupdatesupport.dll virus should be disabled and deleted if he was attacked and you mgupdatesupport.dll error.

  I recommend to download, install and run Microsoft Safety Scanner and check if it helps to eliminate the virus.

  Note: You mast lose data while eliminating malware.

• Driver/module missing at startup message

  When the laptop starts up I get a message about a missing module / following driver?

  C:\Users\Mark\AppData\Local\Conduit\Background\Container\dll.

  Laptop works very well if it's something that needs to be sorted.

  Thanks Mark

  Hi, this Conduit software is Malware, you must uninstall the leads program from Control Panel Add Remove programs. If you can't find a conduit of in Add Remove prgrams you can download Malwarebytes or Hitman Pro and a scanner to remove. Checkurtech

• Problem with I1 Profiler update icuuc46.ddl missing

  ORIGINAL TITLE: problem with the I1 Profiler update.

  Hello

  I have the same problem as other users with my Stallion - I1 Display - when I update the software; missing icuuc46.dll.
  I am still using Windows XP SP3.
  Could you please help me?
  Thank you.

  Hi ajeshdsouza,

  I just wanted to say that they contacted me X-Rite and gave me the solution to my problem. And it is easy to do. Here it is:
  «Unplug your device from your computer, then download and install this new version of X-Rite devices.»

  http://www.XRite.com/product_overview.aspx?ID=1509&action=support&SoftwareID=1262

  Once you have installed it, restart your PC and when the computer comes back to the top again, please plug the device into a USB port on the back of your PC. »

  I hope this can help more people to solve this problem.
  Thank you very much once again for your quick response and your support, I really appreciate your help.
  Best regards
  Amaury.
   

• Error - Cannot open because the hal.dll file is missing at startup of Windows.

  Original title: Hal.dll missing.

  When I turned on my comp., he said he could not open because the hal.dll file is missing.  File downloaded from another computer of zip drive and plugged in, but nothing happened.  Now what?

  Hi wendy1960,

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  This problem may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.

  You can follow this link & check if the problem persists.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  Hope the helps of information.
  Please post back and we do know.

• volume missing on startup xp pro icon

  Not only my volume icon disappeared on reboots (I use XP Pro Sp3) but I followed a link to a solution on this forum (can not find now) and she has compounded the problem. The whole card does not seem to load up. If the sounds tab and peripheral Audio & Sound has been disabled.

  I had to uninstall and re-Morphix my Realtek HD drivers. I am confident that the problem will reoccur on the new service. It becomes quite boring.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?
  3 have. what troubleshooting steps you tried?
  4 are you referring to the volume icon in the system tray?
  5. are you able to hear the sound of your computer when the volume icon is missing?

  Please answer these questions that might help us helping you better.

  See also the articles that you may find useful.
  How to display the Volume icon in the Notification area in Windows
  http://support.Microsoft.com/kb/279435
  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add
  http://support.Microsoft.com/kb/319095