nVida Question: EMT work?

Similar Questions

• Demo ODI - question repository work environment

  I am a newbie at ODI and downloaded the software and demonstration environment (more instructions). The Installer seems to be okay, but when I get to the point where I should connect to the demo environment, I follow the instructions, but can't type in WORKREP as a repository of work - the field is grayed, and I can't go any further.
  
  I started the demo environment using startdemo.bat, and everything seems OK (or at least no error) apart from that.
  
  Am I right to say that the UCR does not need to be run, just to use the demo environment?
  
  Please can someone help? I would like to evaluate the product, but have to face the wall.
  
  Thank you very much
  
  Ian

  Hi Ian,

  I checked the short video you sent me on my personal email. The error you receive is because of the incorrect password ODI.

  I think the ODI password should be CHARGE and not SUNOPSYS as stated in my original post.

  Please try with SUNOPSIS, password demo environment default ODI SUNOPSIS value, unless you explicitly changed it to SUNOPSYS.

  Come to your 2nd question, I don't think that any demo Virtual Box VM to ODI will be publicly available.

  Kind regards
  Rickson Philip Lewis
  http://www.LinkedIn.com/in/Rickson

• Re: Question on working time of battery on a Qosmio X 770 - 11 c

  Hello

  I got a 770 X - 11 c for 2 months now, and the battery life seems catastrophic.

  I expected to be short, but with the Eco mode on.

  Laptop was plugged all day I lit the night last battary and noticed that once in windows the battery see the load of 85% and less than 30 minutes, he was showing the 5%.

  This time was spent web browsing via wifi with the eco mode on.

  I believe, we should expect only about 45 min when the games, but I read the comments and docs tech showing 1 to 3 hours when just web browsing.

  I think 30 minutes is useless, it's not really a battery-powered device is a device with an integrated inverter >

  What time has everything the world of another summer do?

  Thank you

  Graeme

  Well, the page of the product Toshiba Qosmio - X 770-11 C provides information on the working time of maximum battery.
  Mobile Mark 2007 should be 2 h 30 min

  But in my opinion, it's just a theoretical value since the battery working time always depends on the use of the laptop.
  If you could get the 2.5 h only with low light and using low performance as browser internet for web browsing or similar applications.

  Play a game anywhere like HDD, CPU, GPU, cooling of modules even as the screen would go more high-performance and cela emissions and drain the battery very, very quickly

• Re: Satellite A100-491 - Question on working time of battery

  Nice day

  1 year ago, I bought a laptop Toshiba A100-491.
  Now, I noticed for about a month the battery working time amounts to only about 20 min. So I wanted to watch it once in the Internet, how the time of the battery of my laptop is with distribution.

  Under this side I did then also found.
  http://de.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=de&com.broadvis ion.session.new = Yes & PRODUCT_ID = 123290

  Technology: Lithium-ion battery maximum running time: until 02:00 (mobile Mark) HR.
  For me, it is clear that the battery working time decreases, after awhile, but around over a year and a half hours, I find already strange.

  What should I do now?

  Many greetings, JaPf

  Hello

  Battery working time depends on the use of the laptop.
  This means that if you run some heavy performance applications like games, video or graphics programs, then the battery performance would decrease very quickly.

  But if you use common applications like word, or you can navigate on the internet then the laptop should work a little longer.
  In this case, something might be wrong with your battery and the battery should be checked and replaced.

  Good bye

• newbie on getting interface question web work 3424 and 3448 (remailers)

  Hello - I'm over sale of this announcement because the situation has changed.

  We are a church and we try to expand our network.  the requirements are to install a public thread-access point (WAP) on port E1 and E2-48 ports to be part of a community for the Church Office staff.

  We do not want anyone on the E1 - WAP to access what anyone at the Church Office.   I have a configuration below script that works very well to meet our requirements, but as soon as I run one of the following commands, I'm more able to access the unit via a Web page:

  whenever I run one of the following commands:

  Switchport mode private - vlan community
  switchport mode private vlan isolated

  I'm more able to use Web page interface.

  Here is the script I used to set up our unit 3448 so far:

  Enable
  Configure
  interface vlan 1
  IP address 192.168.0.250/24
  output
  Default IP gateway 192.168.0.1
  username admin password admin level 15
  database of VLAN
  VLAN 1000
  output
  interface vlan 1000
  private - vlan primary school
  private - vlan community add 10
  private - vlan isolated 20
  serial interface ethernet e2, e4
  e2-48 ethernet serial interface
  Switchport mode private - vlan community
  switchport private vlan community 10
  e1 ethernet interface
  switchport mode private vlan isolated
  switchport private - vlan isolated 1000
  g4 ethernet interface
  switchport mode private - vlan promiscuity
  switchport private - vlan 1000 promiscuity

  with this script, I can continue to ping from any port E2 by E48 and no port 1.  I am also unable to ping any other port than port E1 according to the needs.   but I still need to be able to access the web interface of * ANY * port.

  Yes, that sounds like a good plan to use teamviewer to access it remotely. On the other hand love IE, the switch was released in 2005.

• Really fundamental questions of work plan

  I recently got PS - CC, and playing around, I discovered work plans.  After you set the preferences correctly, creation of work plan is very easy, but there are a few things I don't understand.  WHY would I want a work plan?  What is its use?  What I do with it?

  In Photoshop, this is a technique of organization. For app designers and Web designers, it is really convenient to use work plans to create web designs and application for different devices or screen sizes in a single file.

• Question about work load alerts

  vCOPs has been running in our environment for 10 months and more. So far it has been used more for critical alerts that analysis. We are trying to get a deeper understanding.

  5.8.1 running

  I read the following messages, but am still a little foggy on why we see what we see.

  https://communities.VMware.com/message/2396460#2396460
  

  https://communities.VMware.com/thread/449924
  

  We receive alerts alert network that demand is to reach 100% of the available resources.

  New alert Type: health, Sub-Type: workload, State: immediate, kind: HostSystem

  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: immediate
  Resource type: HostSystem

  We receive as critical network warns that demand 100% of available resources.

  Nalert Type ew: health, Sub-Type: workload, State: criticism, genre: HostSystem,
  The application of the object: info is 100% capacity of available resource. Network is a limited resource.
  Alert type: health
  The attention of subtype: workload
  Alert: critical
  
  

  If you look at the attached doc you can see actual usage during the alarm time is about 55% of the capacity and actual use during the critical alert is about 77% of the capacity.

  If the alerts are not an indication of actual use of NIC I'm not sure what we say the alerts.

  Any help would be appreciated.

  This network IO bar there is just the last collected metrics. You need to appear a metric chart, where draw you the overall badge | the workload for this host, as well as individual workloads of cpu/mem/disk/network. Look back the past 24 hours or 7 days... and you will see them fortification (vC Ops is not incorrect to say that you are 100 > 90). It is these spikes that can cause alerts. One option would be that you could reduce the alert for infrastructure. workload in config policy to not notify you when this product (alert system host workload). Or instead to drop quite alert, simply set the levels of warning/immediate not getting attention, the critical value to 100 and see what is happening (for the badge of infrastructure workload changes). However, probably if you let this long race, vC Ops will learn the maxObserved of the NIC and conditioned as well higher watermark beyond your normal percentage of 80/90/95 levels.

  For CAP / etc, you can ignore the e/s disk and network i/o, but not the case with the calculations of badge of health.  If you need to exclude individual components of the overall workload of a vSphere resource calculation, the only way is to stop the alerts on the overall badge "charge" and alert on the parameters of work of children... e.g. cpu | workload, mem | workload, etc.

  A lot of options... Try them and see what works best for you.

• Questions, get work VIM 2.0

  So I was sent to the VIM twice now and still has no chance in actually doing work.

  both times I got of erros, that the new virtual machine now could not be discovered.

  If I try to license it, I can't see not listed in the solutions, I'm kinda stuck at this point, any help would be appreciated.

  Another thing to check, you haven't configured the IP address of the managed server vCenter?

  Configure vCenter managed IP address the virtual appliance to vCenter Infrastructure browser access the vcenter Server. To configure managed IP address vCenter in the vSphere Client, navigate to Administration > vCenter Server Settings > Runtime Settingsand enter the IP address of the Server vCenter vCenter Server managed IP field.

• All new phone lock question-restoration works not

  I just got a new phone and tried to erase the recovery mode because the device is picking up a random 6-digit and locking code. Unfortunately, it says that the device is not be restored. Is there anything else I can try?

  I do not understand what it means to 'clear the recovery mode '.  It could mean erase using recovery mode, or it may mean something quite opposite.

  In any case, try to use the procedure described in "Erase your device with the recovery mode" in the article of HT204306 you fixed above.  If this fails, contact Apple Support such as suggested in the "Get more help" section of this article.

• Satellite L30-105: Question on working time of battery

  I think of buying one of them, but the 1.5 hours battery life put me off a bit.
  Can someone give a review? It's all good, and not really the battery only last an hour and a half?

  Thank you. : o).

  Well, the laptop uses a standard 2000mAh battery PA3450U.
  The 2000mAh isn't exceptional value.
  The laptop should run with battery about 1 h 30 min.
  Of course real time depends on the use of the laptop.

  But you can upgrade the farm a much stronger battery;
  To my knowledge the mobile phone should support:

  Battery Pack (6 cells, 4300mAh) PA3399U-1BRS
  Battery (Li-ion, 4000mAh, 6 cells) PA3465U-1BRS
  Battery (Li-ion, 4300mAh, 8 cells) PA3457U-1BR
  Extended capacity battery (Li-ion, 6000mAh, 9 cells) PA3478U-1BRS
  Battery high capacity Pack (Li-ion, 12 cells, 8600mAh) PA3400U-1BRS

  The 8600mAh battery is about 4 times stronger than the 2000mAh

• Interesting question of work schedule

  Hi all

  Lets say I have a task to run 2 times a day both spesific. at 11:30 and 20:45

  What should I write for repeat_interval parameter?

  Version 11g

  Thank you

  Hello

  Create 2 tables and assign them to your business. Check the following thread for an example:

  Oracle Scheduler: create different planning daily times

• Brother HL6050DN stoped working with 10.11.3

  'twas works well before.

  Network connected

  Continues to work well with other Mac/PC

  the idea of 'Reset printer' tried to linc.  No joy

  re-installed driver. no joy.

  I see him that brother lists only the drivers in Yosemite.  Have e-mail for them.

  Yet, he has worked on 10.11.2 on two machines.

  G

  Commenting on my own question - I 'work', but its really not an ideal answer.  The brother really has to fix this.

  1. I downloaded the new drivers (yosemite). no joy

  2. I used Hello and the brother driver. No joy.

  3. I have used Hello and the driver of CUPS.  No joy.

  4. I used IP Printing Protocol, fixed set IP address and the Brother driver.    --> JOY<>

  So it may be obliged to communicate and when done, prints fine.  But it's not hwo its supposed to work, or how it worked before the upgrade to X.11.3.

  Grant

• CSV channel questions

  Here is a good question, I work with some files generated files from a computer at work, and I would like to import the csv file into DIAdem. He acknowledges, however, only the first column, due to the header file. No idea how I can import via a script with two channels in?

  The file looks like this:

  Tested by: XXX
  591_004_2010-05-11_104458_XXXX. CSV
  2010-05-11
  1607.85
  1002
  -9.00001
  16685
  -1, 00,-0.025939
  -0.99, - 0.025939
  -0, 98,-0.025939
  -0, 97,-0.025938

  -0.96, - 0.025938

  -0, 95,-0.025937

  -0.94, - 0.025937

  -0, 93,-0.025936

  report to-0, 92, - 0.025936

  Thank you!!!

  Just use the file DIAdem use wizard and create a use which corresponds to your size.

  Later, you can load all the files of this type with the plugin.

  I enclose one I created with your sample data.

• How do you get text of the works document in another document works

  I want a text to a wps. document in other wps. document?

  The feedback forum, as its name suggests is to post your comments on the Microsoft Answers website, only not to ask questions of work.

  The forum of work is here: http://answers.microsoft.com/en-us/office/forum/office_other

  If you want to copy text from a document of work to another, just to open the first, select the text, choose copy, open the second and paste the text to where you want.

• Lost works spreadsheet program

  I have Microsoft Works Version 08.04.0623 - I lost the software of spreadsheet - simply disappeared.  What is the problem?  Also, when I get the notice of update, my computer will not accept.  I have Windows XP

  Hello

  First thing to try would be to uninstall/reinstall the Microsoft work program. http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  Discussions in microsoft.public.works.win

  They will help you with your question of work in the above discussion group.

  Kind regards
  Chauvet J.