ObjectChoiceField.getContextMenu () .getDefaultItem () .run () not working OS 5.0

Similar Questions

• Application of recovery disc creator don't run / not working

  I was hoping someone could help me I want to create the DVD for my system recovery disks, but the application does not work. I installed IS the path '"C:\Program Toshiba Toshiba Recovery Disc Creator\ToRDC.exe' ' does not exist. I run it and nothing happens!

  Anyone know if I can download it or re-install... I can't find out how?

  I have no error or anything, it does not work! Laptop is Toshiba Satellite.

  Thank you!
  Steve

  Hello

  Satellite you need exactly?
  Folder HDDRecovery is available on the second partition?

  This tool cannot be downloaded. Now, all you can do is to install the OS by using recovery recorded on the second partition image. I hope that it will work.

  When you start your laptop, tap F8 and choose repair my computer option. Follow the menu on the screen. After the new installation of the operating system, you will be able to use it again.

• CouponPrinter.exe does not work. I can download and run the program, but does not, print already added the file name to the list of java exceptions

  running windows xp, update java 7 51, norton antivirus says file is ok, please help

  HI DJDOLLARROB,

  Thanks for posting, as you might expect, there are troubleshooting you can undertake to check why the download does not work. It is highly possible that the source that you have downloaded from cannot be no longer works. Is there a site that you can check to see if it does not work for them either? Also where it is downloaded from?

  Otherwise please see if scanitemswhendone is enabled: change what Firefox does when you click on or download a file

  If download hangs at the last minute (just before reaching 100%), the cause may be an antivirus software that tries to parse the file and during this process the instance of Firefox crashes.

  To resolve the issue, try disabling the analysis as follows:

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page. A list of parameters must appear
  3. Filter the list by typing in the search bar at top. Enter scanWhenDone. Now you should find the "browser.download.scanWhenDone" preference.
  4. Double-click this preference to set the value to false.
  5. Then, try to download something and see if it still crashes.

  Please reply and let us know if this helped you!

• Firefox 4.0 is not working properly (Alienware laptop running Windows 7) - how can I go back to 3.6

  I just downloaded and installed Firefox 4.o and it does not work properly. I am running Windows 7 SP1 on a 64-bit Alienware Laptop i7 cpu 1.2 Ghz, 8 GB of RAM.

  Black boxes cover the text when the mouse passes over it; Some Web pages appear completely black; other flash between black and normal. I can't see tabs when I hover over them (they appear in black). The scroll bar on the left does not. It is very difficult for this type because every time I hit a strike the textblock turns black. It is also very difficult to move to the bottom of the screen.

  The problems seem to be exactly the same as when I downloaded the mine field.

  Can I restore to 3.6?

  Just download it here:
  http://www.Mozilla.com/en-us/Firefox/all-older.html

• When I try to open up firefox it just starts flashing like crazy, then firfox say is already running when it is not. I tried to uninstall and reinstall and it did not work. I can open internet explore

  When I start Firefox, it just blinks like crazy and will do nothing. I got a message that Firefox is already running. Internet Explorer still works

  This has happened

  Each time Firefox opened

  Is a few days ago. Do not remember whether or not she began before or after I removed macafee and added norton

  I don't know what could be the cause of the problem, but you can try opening FF in Safe Mode. I don't know if I can help if it does not work.

• Satellite M35-S456: no right to run the Power Saver & FN keys does not work

  Hello

  I've had this laptop for a few years now, and just recently the comp crashed and required a complete reformat. I lost my recovery CD (let a friend borrow it and he got lost somewhere) and had to use just reformat using my Windows XP pro CD

  After that, I went to the toshibas website and downloaded many utilities that came with my laptop originally, but I'm having a few problems of.

  1. I can't use Power Saver. Whenever I try to open it, it says: "Cannot open because you don't have access rights to open"toshiba Power Saver""
  2 - function keys do not work. The light comes on, but nothing happens when I press a button

  And without people, I cannot adjust the brightness (among others) and we tried everything that I can find

  Someone has ideas how solve these two problems, or know where I can get a copy of the recovery CD

  Thank you

  Hello

  Form where you download the Toshiba tools and utilities?
  It seems that your laptop has been delivered only to the United States and you must use the tools and the American pilots.

  You know the page?

  Visit this link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  I think you used the wrong drivers and tools or if you have not installed the applications in the right order.

  PS; Remember that you are logged on as administrator or if you have an administrator rights before you try to run the installation

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• "History & clear Web site data" in Safari does not work on my iPhone 5 ios running 9.1.

  The "clear history and data from the Web site" in Safari does not work on my iPhone 5 ios running 9.1.

  How to determine you are exactly ?  It works fine on my 6s + 9.1 running.

• Tiara startup script does not work when running file associated with

  Hello

  I have a startup script that works correctly with tiara itself, however when I open a file associated with tiara (tdms files) the startup script does not work.  Is it possible to ensure that the script runs without worrying?  Thanks for the help!

  Bala

  Hi Bala,

  Depending on your use case, I suggest you call the next VI, which comes with LabVIEW, after your purchase VI is the creation of the data file.  Just pass the data file path in the upper part of entry and your path to the VBScript file in less than entry.

  "C:\Program Files (x 86) \National Instruments\LabVIEW 2013\vi.lib\ExportToExcel\DIAdem report Assistant Start CSC.vi '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Run VI Invoke node: VI works, EXE does not work?

  It is LV2009 without patches or updates. I call buffer.vi of static reference with a collection of nodes to invoke to run a VI. I don't have a very good reason for it, but don't want this code on the block diagram. I can't wait to put a lot of effort in this since I can just drag the code on the main scheme and I am sure it will work, but I do not understand why it gives me error 1000: VI not in a State compatible with this operation?

  In the EXE file, when I check the status of the execution of the buffer.vi until I say it runs, sometimes bad. Same code in VI, sometimes slow. I also tried to replace the static VI reference with a reference open VI by using the name of the buffer and received the same error message. I have the buffer VI included in the compilation under always included.

  So I was building an example of project because I didn't post all, boredom was the example ON what EXE has no error. WTF. Then I realized that I had another call from node in the boot sequence. OOPS. I put that in there thinking that the only way it would be mistake was if the VI was running before he called, in this case I wanted an abortion there. It turns out also-error (1044 locked VI) when running in an EXE file, even if this particular node using says he works with the runtime. SO, he tried to abort a VI that was not working. The initial error, 1000, just said not compatible with call node state, did not say that one.

  Yes, sorry for the trouble and thanks for the help. Maybe someday I'll understand the problem that I was led to this, guess who is the fact that I can't debug EXEs. Kind of, I think it has something to do with an XControl I always use it because they always appear as corrupted files just before that the debugger fails. Anyway, thanks again, I'll plug that into the real system and see what else does not work.

• 'Run VI opening' lvproj does not work

  Here's the Setup: I do a VI that reproduces a test model (vilib) and he has associated specifications of construction within a project. My idea is to have a VI user (developer) opens and presents a dialog box (select model, enter a name for the new test, GO). Ideally this VI will simply work the opening.

  If I create a VI and define its execution proerties on "Run when opened" and open it from the browser to the OS file, the VI behaves as expected: it runs. If I open the VI of any where within a project, it does not work. Why would it be? Is there a solution?

  Alright lets take a deep breath...

  Warning, the following is my opinion based on my knowledge of LabVIEW and not the inner workings of the NC, I may be wrong about why the decisions were made:

  This feature in my opinion was put for many years, as a cheap way and dirty to make it appear as if a VI is executable code (which is sorta maybe but should not be treated exclusively as).  Years if you had a code and you wanted a user to double click on an icon and have, it starts running you'd make an EXE.  Although necessary the application Builder which was extra money and it was a decent amount of steps involved.  New LabVIEW users complained that it was too difficult and he wanted a way to simply double click on a file and that it is then NOR added to this function.  NOR tried also makes it easier to do by adding additional items in the Tools menu to eliminate steps.  Now if you double-click a VI with nothing open, who has run when open setting on, it would be open and run in LabVIEW.  Running as an application source code has several pitfalls and issues, and in other languages (no scripting) that would not be tolerated.  But it was a hacky way to satisfy beginners of LabVIEW.

  LabVIEW has subsequently obtained projects and an easier way to make EXE (always requiring the application Builder).  Now using the source to a project, looked and behaved more as a source in other text-based languages.  Opening in this respect a VI would be the equivalent of opening a text file in Notepad.  And given the behavior of open text and have it automatically start running from your source would be a bad thing.  The State of the source can be easily changed which is one of the reasons why binarys must be used in these situations.

  So essentially, this feature is old and broken.  Should not probably exist at all, and the fact that there is NO bend to the will of those who don't know not what was best for the language as a whole.  This feature must either be removed all together, or be updated to run in a project which I hope I made clear is probably not the best solution.  A third option would be to simply update the documentation indicating the current behavior.

  If you want to run a VI opening this feature, but open the VI project.  Instead simply open the VI of your Explorer of files, or file > open in LabVIEW.  Opening a project is indicative of the IDE you try to change the source, in which case it does not run when opened.

  The good news is that neither has a place where you can suggest new features or improvements for LabVIEW.  If there are a people who agree with your new idea they kudo it and enough Bravo causes OR to examine these features.  If it is important for you, and there is no suitable work around, I'd make a post here.

• I am trying to run windows update, but it will not work.

  I tried everything but windows update will not work. I used scanner security microsoft onecenter and you run virus and spyware scans and defragged my computer and fixed it all. However when I try to run windows update I have a problem that says: Windows Installer of Module: WindowsWcpOtherFailure3. I tried everything and I'm running out of ideas!

  See if the following can help:

  1. how to reset Windows Update Componeants
  http://support.Microsoft.com/kb/971058

  2. system analysis tool:
  http://support.Microsoft.com/kb/947821

  3. how to solve problems
  http://support.Microsoft.com/kb/2438651/en-us

  4.

  Support for Microsoft Update technical problems - troubleshooting

  http://support.Microsoft.com/ph/6527#TAB0

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.