OCD problems

Similar Questions

• Style with my OCD problem

  I was successfully created my first InDesign table of contents. WooHooo!

  There is something that I have not been able to understand. I would like the page number should appear on the right side of the page, as apposed to place just next door from the entrance. Also, I would like to have a traditional dotted line between the entry and the page number.

  So far I could not understand this. Is anyone willing to point me in the right direction?

  Hello

  Once you add the points, wil page number automatically moves to the right.

  Below are some links for the same:

  http://help.Adobe.com/en_US/InDesign/6.0/WS93520428-E608-4a5f-83B6-E83E09A40766.html

  http://help.Adobe.com/en_US/InDesign/6.0/WS49FB9AF6-38AB-42fb-B056-8DACE18DDF63a.html

  http://InDesignSecrets.com/tab-leaders-part-1-separating-columns-of-text-with-dots.php

  http://InDesignSecrets.com/tab-leaders-part-2-formatting-leaders.php

  See you soon,.

  Patricia

• Table of content problem

  I looked through a number of other discussions here, but have not met my exact problem.  I noticed people with their OCD problems some of the positions of the command correctly.  My problem is similar, but I don't see how it's the same thing.

  Here's my problem. Here is a part of my OCD.  What is happening is that in this case he puts Chapter 6.1 in Chapter 5.  And they are located on two different pages.  Section 6.1 is under the title of maintenance and Service in my document.  I want to become if he always puts it correctly.

  5.8 carrying 50
  5.9 storage 51
  6.1 maintenance Chechlist 52

  
  SERVICE & MAINTENANCE 52
  6.2 liquids and lubricants 53
  6.3 lubricating 53

  It does not have on all my sections.1, but she does so once, he'll do it every time I have recreate my OCD in the same place.  I've been manually fix this Cup and just and paste, but I was hoping there was an actal fix for this glitch.

  Extend the scope of the topic to the left is more to the left than any other element on the page. ID seeks frames from the top left corner, then moves down before moving to the right.

• Using MKS and RoboHelp

  Someone created by MKS to work with RoboHelp? How does with the compilation, archiving and retrieval, etc.?
  
  Thank you!
  
  Stacie

  I wanted to post our 'solution' to this question.

  We will use MKS for all files. Small changes, such as spelling and grammar, the developers will check out and check in files of MKS. The biggest changes, such as OCD problems, all pages will have to be recovered. We'll generate WebHelp files once back in a week by checking all the help files for web and then by checking them.

  Phew! I know that sounds like a lot, but this should do the trick for us.

  Thank you!

  Stacie

• Opera browser problems: OCD does not in expansion & search error display

  RoboHelp HTML

  RH8

  Opera 10.10

  In the generated WebHelp project, my table of contents (TOC) does not develop in the Opera browser.  No matter if I click on the + sign next to my subjects or the text of the topic, the table of contents does not extend.

  Also, when I select the tab/link search in my outings, a mistake is listed where the results would be shown, which States, "error: failed to initialize the database."

  I could not find suggestions in the documentation for RoboHelp or on the forum, so I have no idea where to start.  I know that these problems do not exist in Explorer, Chrome, Safari or Firefox.  Any suggestions you have would be most useful.

  Opera is not a supported browser. If the aid works otherwise OK in IE, FF, and Safari, it maybe not much you can do about it.

  See www.grainge.org for creating tips and RoboHelp

  Follow me @petergrainge

• IPod synchronization problems

  So never had a problem in the past, but I try to sync the albums selected on my ipod, I sort iTunes plug in select the albums that I want and click on synchronize.

  It is synchronization of the songs for about 1 min then saying its full but when I go on my ipod, some albums are available, others are but fade entirely grey or one or two songs available. The greyed out are only available online.

  Also the cover of the album is not synchronized on albums which they already have.

  Also tried sync any library where before it took all night en to synchronize its saying its done in like 1 min.

  Very very frustrating because I have a slight OCD with it!

  Thanks again

  I have wiped all the music on my ipod and I'll wait to see if anyone can help.

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• I am having a very strange problem with WMP 12 in WINDOWS 7

  Hello. I could use some help. A bit of background. HP can not solve the problem (I have a contract with the manufacturing service). I used this drive for 2 years without a lot of questions. I have more than 400 albums in my library.

  I got a new CD, sealed in its original packaging. The 1st thing I always do when adding new items to my library's copy of the disc. After that I tear to the library. Then I play WMP 12 on my desk. Everything was going well until the runway 13, when, after 00:28 seconds, he stopped play. I think a lot I have to send this back CD. Then after still ongoing at 01:16 he started playing again!

  I thought it was a little weird, I played both the original and the copy in my drive, they played very well. On my laptop, I played the original, he played without a break. I ripped the album to WMP 11 on my laptop and then saved on a flash drive. I used the flash drive to load the album to my office (WMP 12). He stopped playing exactly like the CD! Then I played the music taken from my Amazon music player and it plays very well.

  Please help, I know it seems trivial, but it drives me crazy (OCD, what can I say?).

  In addition, Ive ripped plus CD for my library without problem? Thanks for all the ideas.

  Hi Raymond - all the best for 2015.

  I read your Q When you first published and have waited to see if anyone has offered anything. Silence came the strong response! It is as you say - a strange. Track is playing well in one system and not another, etc.

  The only suggestion I can think of is open the file in an editor such as "Audacity" and that might give you a clue as to if there is a mistake that he stops playing and also a way to re - store version of wav music file seamlessly. It depends on how your OCD is ready to take you...!  :-) - you may need to download install and learn how use Audacity if you are not already using it or something similar.

  Let me know if you want to pursue this further. R

• State of OCD for a slide is not updated until that whole group is consulted (Cap 5)

  I have some difficulty to understand certain behaviors, I see with the indicator of State TOC. It is my understanding that Captivate 5, the status indicator is displayed only after you reach the end of a slide. In newer versions, which has changed and that a user only need to show a slide to trigger the status indicator.

  One of those who would be acceptable to me, but I feel something different. My OCD is structured so that only the first slide in a slide group appears in the table of contents, as they are more like chapter stops slide granular level, browsers (I have 174 slides in the project, so the chapters are more digestible). Entries in the table of contents do not end unless all the slides in the chapter were read, not only the initial slide that populate the table of contents. This becomes a problem in specific chapters, those who I change things at the user to interact with the software in demonstration and involve an offshoot, which have no end, unless all of the slides in this chapter are affected. Why is this? The table of contents should not depend only on slides shown in the table of contents? If so, I can assure you this slide from the opening of a chapter, that of the filling of the table of contents is seen until the end. Instead, it seems to be related to branching in these chapters, even if the blades are not represented in the table of contents.

  To be clear:

  • I'm afraid with this indicator of status in the table of contents; I am not concerned about the production of reports for the course as a whole (I handle this in a different way).
  • I set the button to launch the activity on the slide to the next slide, first chapter 'Continue' ensuring that the slide is seen until the end.
  • I can reproduce reliable that the status indicator does not appear unless all the slides in the chapter/group was seen, and it seems permanently when each slide saw.
  • This does not vary with the grouping of slides; I removed the Group and have experienced the same behavior of status.
  • I am aware of the TickTock widget, maybe use it if necessary, but I am intrigued by what I thought would be simple behavior.
  • I am not concerned about a rigorous check that the users have completed all slides. I just want to the table of contents to show that a chapter has been visited, and to this end, the initial slide of activity is good enough for me.

  Any ideas?

  Indeed. Unless all the slides in the Group table of contents are visited, this element will not be marked as completed.

  TickTOC widget was developed for this specific problem.

• Problems with a fixed layout TOC

  When I export a layout fixed epub from a file of book with the names of files chosen as type of OCD, I get the entries of table of contents for each page instead of chapter. Need help solving this.

  The problem you are experiencing here is the chapter names based on the names of the xhtml files (for example chapter-4-2 and not Chapter-4) and not the chapters. Am I correct here?

  This problem is known to us, and we try to fix it in the next update.

  Kind regards

  POOJA

• The two problems with sub form of table, associated with check boxes

  Hi all -
  Jari already helped me thereby once last week, but I'm running into some new questions.
  
  http://Apex.Oracle.com/i/index.html
  workspace: Leppard
  username: Guest
  PW: app_1000
  Application: MyTestApp
  
  Maybe I need to split these into two questions, if so just let me know.
  
  Question 1: On the first tab (tab 1 report) I have a simple tabular presentation based on the EMP table. The column of the box on the far right, when checked restores the Ename column readonly. The problem is that it only works one way. Unchecking the checkbox is not cancel the read-only.
  
  It is javascript code that I have on the page:
  

  function test(pThis) {
   //get the current row index on change
   var currIndex = $('input[name="'+pThis.name+'"]').index(pThis);
  
   // check current items value (return value of lov)
   if (pThis.value=='Y') {
    $('input[name="f02"]')[currIndex].style.backgroundColor = "LightGrey";
    $('input[name="f02"]')[currIndex].readOnly=true;
  }
  else if (pThis.value=='N') {
    $('input[name="f02"]')[currIndex].style.backgroundColor = "Red";
    $('input[name="f02"]')[currIndex].readOnly=false;
  }
  }

  The attribute of the element on the checkbox column is
  

  onClick="javascript:test(this);" 

  (It seems to work although I use onClick or onChange so I don't know if that makes a difference).
  
  But the main problem is that the code does not recognize the value of "n" in the column. I checked with firebug and columns I have untick are definitely on 'n', but I can't get javascript code to recognize this value. Even if I take the "ElseIf" code and just change the first part to (pThis.value ==' no) still does not work. There seems to be something with the value "n" recognize themselves do not, but I can not understand.
  
  Question 2: on the second tab - tab report 2. The same report but this time, I use a javascript character counter similar to that described in the sample application of the Dene (page 276 > http://apex.oracle.com/pls/otn/f?p=31517:276:19207673535900:NO). The counter of characters on the Ename field include javascript and an expression of HTML on the Ename column. The counter works fine, but now, the javascript code to make the column readonly work over all.
  
  Any ideas on these are much appreciated!
  
  Thanks in advance,
  John
  
  
  • Please please understand what HTML is generated and how to inspect. Once you do this, you can easily eliminate many problems with selectors not seeming to work. A text box is not an input for example element.
    
  • Boxes rely on the checked, not the value property. Apex circumvents this by creating a hidden extra element which will get the value based on the checked property of the visible checkbox
    
  • Do not use these horrible onchange and onclick attributes :( Use a dynamic action or jQuery to bind events.
    
  • Do not apply a style via javascript. Use CSS for this drive as with jQuery, you can easily add, remove, or toggle the classes too. And if you know jQuery selectors, you can understand css selectors because they are substantially the same.
    
  • I don't know why people insist on using rowIndex or substringing ID. I find it unnecessary and more complex that the alternative (crosses with jQuery)
    
  • The difficulty also in things into action through pagination. Running on just the visible page it of a trifle, but through paging requires more work than just check "fire on loading the page" is not enough. I'm sure you'd want your ENAME either red or gray column and readonly as soon as the page is loaded, and not when you start typing in the box...
    

  Form 1 tab: copied to Page 12 and made my changes here:_
  

  
  
  • OnChange on ENAME. This removed. No idea why you would need it there seems a crutch for not having the field in the desired state when the page is loaded.
    
  • OnClick on CHECKBOX. Removed what I hate these attributes. Replaced by a dynamic action.
    
  • Dynamic action "checkbox: ENAME readonly value."
    
    
    
    • Event: After refresh
      
    • Selection type: region
      
    • Region: Form of tab 1
      
    • No condition
      
    • Scope of the event: static
      
    • Real Action
      
      
      
      • Run the JavaScript Code
        
      • Fire on loading the Page: YES
        
      • Code:

        //at page load and after each region refresh:
        //each: check all checkboxes and set readonly on ename accordingly
        //click: when the checkbox changes, change ename accordingly
        $("td[headers='CHECKBOX'] input[type='checkbox']:visible")
        .each(function(){checkReadonly(this);})
        .click(function(){checkReadonly(this);});
        

      
      
  
  
• Page > function and global variables declaration

  function checkReadonly(pCheck){
     var lCheck = $(pCheck);
     lCheck.closest("tr")
     .find("td[headers='ENAME'] input:visible").each(function(){
        $(this).prop("readonly", lCheck.prop("checked"));
     });
  };
  

• Page > CSS Inline

  td[headers='ENAME'] input{
  background-color: red;
  }
  td[headers='ENAME'] input[readonly]{
  background-color: lightgrey;
  }
  

  CSS works so much better for this than the application of style through js...
  

Form 2 tab: copied to Page 13 and made my changes here:_




• OnChange on ENAME. This removed. No idea why you would need this.
  
• OnClick on CHECKBOX. Removed what I hate these attributes. Replaced by a dynamic action.
  
• Dynamic action: identical to page 12, just modified trigger area
  
• Changed input to TEXTAREA when it is required:
  
• Page > function and global variables declaration

  function checkReadonly(pCheck){
     var lCheck = $(pCheck);
     lCheck.closest("tr")
     .find("td[headers='ENAME'] textarea:visible").each(function(){
        $(this).prop("readonly", lCheck.prop("checked"));
     });
  };
  

• Page > CSS Inline

  td[headers='ENAME'] textarea{
  background-color: red;
  }
  td[headers='ENAME'] textarea[readonly]{
  background-color: lightgrey;
  }
  

• The f_set_counter function, I changed a bit: there are 2 straps too, put a semicolon at the end of each line.
  -Change $x (node) .value $s (node, value) and $v (node)
  -changed $x (node) .innerHTML to $(node) .text)
  I know: it worked. I like this better. OCD? :/

function f_set_counter(pThis,pLength,pMaxLength,pReset)
{
   if (pLength>pMaxLength){
      alert('The maximum length of '+pMaxLength+' exceeded.');
      $s(pReset, $v(pReset).substring(0,pMaxLength));
      $("#"+pThis).text(pMaxLength);
   }else{
      $("#"+pThis).text(pLength);
   };
};

Published by: Tom on February 15, 2013 12:48
Made a mistake in the case of dynamic action :->, click after refresh!

• TOC problem parent Webhelp

  In Robohelp 10.

  When I have more than 25 children OCD published in my Parent TOC projects:

  When I display the parent TOC everything seems OK until I select a child OCD. At this point, the child project is displayed in a separate session of IE.

  If I change the parent have say only 20 entries of table of contents of child, on the display then the parent TOC in Internet Explorer, the OCD child then open correctly in the same session of IE.

  Any thoughs on the cause of this problem?

  Best regards

  Paul Ashton.

  Hi Paul.

  II don't think that the problem is the number of the child projects. Check the properties of the entire child Webhelp SSL and the properties of the window and they are all identical to the parent project. BTW, if 20 works OK you have already reduced the problem to one of the other 5, so it shouldn't be too hard.

• Problem Word document with table conversion table of contents

  Hello

  I use MS Word 2003 and Acrobat 9 in Windows 7 Ultimate 64 bit.

  I created the manual using Word, I put position (s) with 3 levels deep and created the table of contents in Word.
  It seems as expected. There are titles, subtitles and subtle (3rd level).

  Table of contents in Word works very well. No problem.

  In the PDFMaker options on the Bookmarks tab, I put 1 TOC with 3 levels.
  However, after you convert the entire document in PDF, bookmarks seem very strange.

  They contain only the titles (no subtitles at all), each bookmarked line ends with some number 3, 4 or 5 that I have not idea what it is and these bollmarks point to page table of contents no to the page, they should have.

  
  What is the problem and how can I fix it?

  Thank you

  JAS

  Added:
  I have read a lot of posts with similar problems and tried all of the suggestions posted.
  I tried:

  1.

  Reinstalling Adobe (by removing all of the related files), well I don't have any older versions (and facilities) of Acrobat in this computer.
  2.

  In Adobe PDFMaker uncheck the option "enable accessibility and...» »

  3.

  Set up printer to Adobe PDF

  4.

  In Word > parameters-OCD I ticked the option "use hyperlinks instead of page numbers.

  I also tried in Adobe PDFMaker use not FAKE, but to use 'convert Word headings to bookmarks.
  The result was horrible. Double bookmarks, reverse a lot of bookmarks empty and level 1 level 2 positions (I think that created by blank lines in the charts on the pages).
  Please note that by using the same word headings create TOC without any problem!
  The only plus side was that some of these bookmarks came with correct links.

  

  These bokkmarks were created using "New bookmarks from structure" option in Acrobat (after conversion of the document)

  /JAS

  I recommend that you look at this blog. It guides you through the steps.

  http://blogs.Adobe.com/acrolaw/2011/03/ensuring-that-Word-TOCs-create-hyperlinks-in-Acroba t.

  I hope this helps!

• Problems with the service of version 9.0.2? Sudden research questions of text in the output WinHelp files

  I've been building and using the same aid project in multiple versions of Robohelp since 2002 about.  Upgrade to Robohelp 9 earlier this year (Office 2010/Win 7), properly migrated project in RH9 and Word 2010 RH7 and W2003.  Despite being really bug RH9 and doesn't play well with Word, were able to continue to build multiple versions of the project without successfully exit WinHelp 2000 compilation problem, no error messages all basically good.  Until the 9.0.2 update.  Of course, the update fixed the issues of speech, now HR and Word 2010 not play very well. But now I get the dreaded "cannot search, display tab: error 177' Message in compiled projects.»  This same message now appears on WIn XP machines that have the project distributed.  Also find full-text search is available on the Win 7 despite the warning, but on a XP machine machine only partial text is available for searching (so this is not the question of Win7 re display of files HLP - win 7 has all the patches of register machine and MS. HLP Patch installed to run and has not been a problem to date).  Coincidence?  This started to happen since the 9.0.2 update installed?  (The cause of the error message doesn't seem to be the traditional corrupt file GID on PC like on XP machines before the new installed help file, it will be deleted).  Have I somehow changes the settings in the HPJ file or another project file generation?  Is this a problem of indexing that I can fix?  If so someone at - it ideas?  Come to think of him with ideas at all about what is happening here and how can I solve this problem?  (I'm considering back in the initial installation of RH 9 (implemented with Bugs) and see what happens but fear I might have inadvertently installed something version 9.0.2 )

  Another interesting question is that the immediately previous version of this project (built with the Buggy of RH9 version) re - unfolds on the other computers and XP very well.  So why I suspect 9.0.2?  Anyone with some help pls?  Where I could look in settings (if any) to correct the problem?  I tried to re - create a completely new project with the same word documents, but using the origingal. HPJ file and the same problem presented?

  Peter,

  With a lot of relunctance, (probably because of being on holiday and in the middle of the Christmas break), I've rolled up their sleeves and rebuilt the project from scratch. (What else do you ndo when on vacation?-can think of several things). The project is bitmaps quite large, consisting of 38 separate Word Documents, 908 topics, 731 jumps, 907 keywords and 37.  This project was built in 2000 and enjoyed time has reached this size. Each year, some 15 to 20 of the draft versions are built as subjects and content changes.  The propject resulting is distributed on a netwrok involving 3 operating sites and more than 250 terminals.

  The first step in correcting this problem was to place all word documents in word 2010 format (38) project.  Before that documents previously saved in Word 2003 format and open in Word 2010 (compatibility) mode.  On the assumprtion there was a problem of compatibility between 2003 and 2010 word format causing the compiled research questions.  I saved all the latest known version of 'Good' of the project documents in this mode.

  Once all documents saved to Word 2010 format, each document has been individually then imported into the new project, the project saved and built after each document imported.  This was done for was the origin of the problem to ensure that a particular document.  None appeared.

  Once that all the 38 documents any OCD has created the last well-known CNT file.  Imported into this new project in the form of measurements of the CNT old file rather than use then file itself.  Project saved and rebuilt again.  Still good.  I used the text instead of the CNT file again just to try to eliniate hidden, coding of corruption in the file of the CNT.

  Then the sequences to browse relevant have been updated in order to meet the requirements, project archived for proken links (found nothing) or any other error.  Once again.  Nothing found.  Re-built and still saved.  No problem identified with the project.

  At this point the last well-known version has been restored in a new project just in Word 2010, format, changes in the (next) version of fault had not yet been restored to the project.  5 files in this version had a lot of changes that I have taste not individually make each change.  In order to reduce to a minimum rework them, I took the opportunity to copy the text of the documents and paste the text into the new word format documents (rather than import something that may have corrupt and coding). In each case I deliberately does not include the first or the last lines of the documents in the copied text, again try to eliminate the import of any coirruption that may have existed?  Yet once, save and rebuild the project after each import text.

  Final score, a return without erors project.  Tested on 2 different local machines (both running Win 7 with Winhelp patch applied) no error returned.  Deploy the updated on the work network this morning.  (XP systems), yet once no erors returned and full don't search feature now available.

  So, what was the problem?  Not sure that I'll never know, (I have a second project on another topic which is still in Word 2003 format, built under this version of RH9 and she does not have the same problems I had in this project).  Whatever, it was an absolute pain, many lost hours, but a positive result (finally).

  Thanks to you and the people who have offered nhave his help.

  Bryan

• OCD and footers do not correctly generate in print output

  I use RH8. Until yesterday, was able to generate output .doc fine. We usually run a macro to clean the OCD and footers. Yesterday I had to update an older help created in RH4W file. I made my changes, closed RH4W and returned to work in RH8. My .chms generate very well. This is my file .doc on paper which translates as no creation of OCD or footer.

  Here's what looks like one of the footers and the table of contents. If anyone can offer any suggestions (I am at a loss - even removed the ssl and started from scratch), I would be grateful.

  

  

  The problem is in your Word settings, not RoboHelp. It seems that you have configured to display Word field codes.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Table of contents to highlight the problem

  Hello

  I use RH8.0.2.

  When I click on the text of the hyperlink it navigate to the correct page, but in the content of the table of contents section that appears is not highlighted. Then there's the page where he was selected remains highlighted.

  For example: as in Fig1, if I click on the "TMD PDU" it navigate to the page on the right as in Fig. 2, but fake 'E - UTRA RLC Messages Overview' remains enabled. Ideally in TOC "TDG PDU" page should be highlighted.

  How to solve this problem?

  

  Fig1

  

  Thank you and best regards,

  Rahul

  Hi Rahul

  There are a few things you need to check here. I will assume from the images, you create the CHM files.

  First, open the project set-up pod and expand the Windows folder. Change the properties of your CHM window, and then make sure that the option to synchronize the table of contents has been activated.

  

  Once you've done that, change the properties of single Source available and click the change... button. This should open another dialog box where you must click on the Styles tab OCD make sure you check the option always show selection .

  

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 times now - $24.95! Adobe Certified RoboHelp HTML Training SorcererStone blog RoboHelp EBooks