OCFS2, ASM and Raw Device for the voting disk and OCR

Similar Questions

• RAW device to the virtual disk migration

  When trying to cold migrate a raw disk device VM of EVA Storage to a virtual disk in a DS8100 it fails with the following message: "incompatible device backup specified for device ´0´" the size of the LUN is Go 510 and appaers message when 100% is full 3 hours laters. I set the block size 2 Mb in the data store, but when I try to migrate a RAw of 100 GB on the same VM migration works very well and I use the new virtual disk without problems.

  This could be a problem with the maximum of storage migration?

  Could you tell me if you know another way to migrate this raw device on the virtual disk?

  TKS!

  Have you tried VMware Converter inside the guest who has the backend RDM?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• How to OCR and the drive to vote of raw devices for ASM diskgroup

  Hello
  
  I plan to upgrade my environment clusterware/ASM 11.1.0.6 to the grid
  infrastructure 11.2.0.1 on Solaris sparc 64-bit.
  I also plan on spending the OCR and discs of raw devices to ASM voting
  starts. But how to do? When should I do: upgrade
  process or after the upgrade? When should I start?
  
  Thank you

  create a disk group or use an existing disk group that matches your redundancy needs

  To ocr asm
  ===============
  1 ensure that the clusterware version 11.2.0
  # crsctl query crs activeversion
  Oracle Clusterware version active on the cluster is [11.2.0.1.0]

  2. replace the OCR file by the asm disk group
  #ocrconfig - replaced - replacement<+ASM diskgroup="">

  3 remove the old file ocr
  #ocrconfig - remove

  4. check the integrity of the ocr
  $cluvfy comp ocr n - verbose

  SE asm votedisk
  ======================
  1. Add the voting disk to the asm disk group
  #crsctl replace votedisk<+asm disk="" groupname="">

  Note: According to the disk group redundancy the required number of ocr and voting disk files will be created
  Normal: 2ocr, 3voting disc
  For the great: 3 ocr, voting 5 disc

  do not backup the ocr/votedisk dd in 11.2.0

• tests of the device for the time of the ASM and Network Protocol (NTP)

  Hi all.
  I try to install Infratruction grid Oracle 11 g R2 amd oracle Linux OS but
  I got the following error.
  
  tests of the device for the time of the ASM and Network Protocol (NTP)
  can someone guide me what should I do for them?

  in RAC 11 GR 2, the option to synchronize the time between the nodes are ntp or ctss.

  If you want to use ntp add the - x option in/etc/sysconfig/ntpd (for example OPTIONS = "-u ntp:ntp Pei /var/run/ntpd.pid x")

  Hope this helps

• BlackBerry Smartphones Application Loader said... way has no software of BB device for the connected device.

  Mine is a new 8320.  I installed the Desktop with Media Manager software.  Seems the 8320 on the CD Office and the online version does not include Media Manager so I installed v 4.2 Service Pack 2, which includes the Media Manager.

  Now cannot transfer music files (I get a memory error output) and when I go to the application manager to check the memory, he can't read my 8320 and I see the message "doesn't have a device for the connected device software."

  How can I add 8320 sotware for the Application Loader device so that it can read my memory allocations 8320, etc.?  What else could be the reason I can't transfer music files?

  First of all, without a press card is impossible to move higher to 2.86 MB files to the device.  If you get a media card you can load any file size to him and you don't even need Media Manager.

  Secondly, you will need to install the software on your PC so that DM will recognize it on the device.  You can get the software from your carrier download site.  Here is a link that should help you:

  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

• BlackBerry smartphones how to obtain the latest device for the 7100v 1.8.0.138 platform software?

  How to get the latest device for the 7100v software (platform is 1.8.0.138, which is relevant?)?

  Thanks for your help!

  Cheers, cazz

  Hello!

  Your provider through this Portal:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know how it goes!

• just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a subventio

  I just bought a new EOS 7 d mk2 camera but can't open the CR2 raw files in Photoshop CS5. I downloaded the new raw converter for the camera which is the DNG 8.7 format for my windows computer operated. When I click on a CR2 file I get a notification to come as States "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of camera raw.

  I'm entered in Photoshop and loaded the dates above, but have met 3 mistakes when you do this (1) Adobe Bridge CS5 4.0.5 (2) Adobe extension Manager SC5 5.0 update (3) 12.0.4 for Photoshop CS5 Photoshop

  I tried for 2 days now to try to get the operating system for your support/help will be most appreciated.

  My old camar is an EOS20 D and I have no problem with CR2 files it produce

  Hi rodaks, george

  Images II 7 d would be directly supported in Photoshop CS5 as requiring a new camera raw.

  So, you must download the free DNG Converter to convert these images to DNG and then open the DNG converted in Photoshop.

  See this link for download DNG Converter 9.0:

  For Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.0: thanks

  For Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.0: thanks

• vSphere "There is no device for the PCI Passthrough on the host"

  Hey all,.

  I use a trial version of VMware vSphere 5.1 on a server Dell T - 410 Quad Core - w - 32 GB of RAM.  I'm not under vCenter.  I installed this after attending a class on VMware vSphere there and now I'm just using it because I need to study the materials of many moons.  I left 40 days on the assessment.

  I'm trying to add support for a PCIe card in VMware vSphere for a Linux CentOS client.  (Note that all customers react in the same way).

  When I click on the Client and then 'change settings' > I see the dialog window 'Properties of the Virtual Machine' and the Add button.

  When I click on ADD, I see the following:

  "PCI Device (not available)".

  By clicking on the PCI device in gray reveals that:

  This device cannot be added to this virtual Macine because:

  There is no device for the PCI Passthrough on the host

  ---------------------------------

  I have looked in a number of places but haven't seen any clear information about how to ADD a PCIe or PCI peripheral Passthough.

  Can you tell me messages of the Forum or Documentation for this operation?

  I run a vCenter evaluation copy to pull this off?  (And there are copies of assessment of vCenter even?)

  Thank you

  Tommy

  Select the host, and then you will see the configuration tab.   Advanced settings is at the bottom left.

  OK just see your message... good luck!

• I lost my backup for windows xp home disks and now my computer asks me for the startup disk. Is there anywhere I can download the file on a dvd?

  Windows xp starts

  I lost my backup for windows xp home disks and now my computer asks me for the startup disk.  Is there anywhere I can download the file on a dvd?

  Hi DrKathy1950,

  ·         Did you do changes on the computer before the show?

  ·         When she asks the startup disk?

  ·         You get the error message?

  ·         Are you able to boot to the desktop?

  Answer with the information required to help more.

  For reference:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

• So... how long must we wait for a RAW update for the camera Nikon D600?

  So... how long must we wait for a RAW update for the camera Nikon D600?

  Hello!  Good news for you: your wait is over: the Nikon D600 received preliminary support (this means that the rendering of colors may slightly change in future versions, when it will be officially supported) from today: http://blogs.adobe.com/lightroomjournal/2012/10/camera-raw-7-2now-available.html

• Microsoft has never issued an update for the Win7 disk defragment utility?

  Microsoft has never issued an update for the Win7 disk defragment utility?  Thank you.

  Original title: Win7 updates

  To my knowledge, the Defragmenter from Windows 7 has not been maintained since the liberation.  You have a problem with it?

• I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

  When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  Step 1.  Identify the make and model of the USB device.
  Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

  Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

• A slight color and quality shift when viewing RAW files for the first time in the library Module.

  Hello

  I've been shooting RAW for awhile and have notice that after I import the images and then begin to view in the library Module, I see a light color and quarter of quality - almost looks like a shift in the balance of whites, but not quite.   I thought that maybe there was some preset automatic applied but I do not have all of the presets.

  I'm shooting with a Canon 1DX and 7 d.  I have not checked to see if I get this situation with the 7 d, but I know for sure that I understand with the 1DX.

  Today I have passed through a few images in Bridge and decided to open one in Camera RAW.   At that point I found out that the Style of the images of the camera settings are available, faithful, Standard, Portrait, etc..  I noticed that the images did not camera styles applied to them, but rather the Style Standard Adobe have. At this time there in RAW I chose one of the styles of the camera and the bingo that's the kind of change that I see when I first discover an image in the library of LR4.

  So I can say that the RAW images are becoming the Adobe Standard style applied in LR.   I don't know if it's a default behavior of if I did something to make.  I think also that maybe LR not necessarily applies Styles of the camera automatically even if the particular style has been in the camera - is perhaps not imported as part of the metadata during import and so the default Adobe Standard.

  I guess what I need to know a few things and I hope that someone can educate the beginner!

  1 should I expect LR4 to apply the Style in the game of the camera automatically or not at all?

  2. can I prevent LR to apply the Adobe Standard Style and apply no style?

  3. can I cause some LR apply the Style as set out in the camera for the particular image to be appied automatically when importing?

  Thanks for any guidenace you can offer.  Of course if you need further information or clarification please let me know.

  Scott

  This sounds like what you see, Scott? Why the color or tone of my image changes after import?

  http://forums.Adobe.com/thread/358016

• adding the new safety device for the family

  Dear all, I recently bought a new pc W8 for my 12 year old son.  When I added the user account for the new pc, I clicked on the box to indicate that he is a child and accessible account parental to ensure that all of the boxes on the right were clicked.  However the new pc does not appear as a device on familysafety.microsoft.com, and I have not received a weekly e-mail, giving me details about its activities on the new pc.  Family safety continues to operate while on his phone w8, on my laptop w8 (on which he is a user).  What I am doing wrong?  Thank you

  Hi frednell,

  Thanks for posting to the Microsoft Community. I understand that the child on the new computer account does not appear in the Family Safety website. To resolve this problem, make sure that the parent e-mail account is defined as an administrator on the Windows 8 of the child computer. After that, please follow the steps below on how to properly manage the settings on the Family Safety website:

  1. On the start screen, type parental controls.
  2. Click settings.
  3. Click the parental control .
  4. In the lower part of the window, click Manage settings on the Family Safety website. Your default browser will be directed to the Family Safety website.
  5. Sign in using the parent account.

  Let us know how things will go.

  Kind regards.

• VibrationController is not vibrating device for the period of time or indefinitely.

  Hello

  I develop native application of BB10, requiring a vibration of the device to warn the user.

  The amount of time (2 min or more) to vibrate that I provided is not honored by VibrationController. It always vibrates for a predefined time amount (less than 10 seconds) and stops.

  No matter how long, I specify in the start() method, it always vibrates for a predefined time quantity and stops.

  Here is the code I use:

  QML

  function vibrate() {}

  80, duration 2 min vibration intensity

  VIB. Start (80, 2 * 60 * 1000);

  }

  attachedObjects:]

  {VibrationController}

  ID: vib

  }

  ]

  {Of container

  layout: {DockLayout}

  Button {}

  text: 'alert user '.

  onClicked: {}

  VIBRATE();

  }

  verticalAlignment: VerticalAlignment.Bottom

  horizontalAlignment: P

  }

  }

  Request let me know what I'm missing here.

  Also can I specify indefinate amount of time like duration. so that the vibrations does not stop even I stop explicitly.

  Here is the configuration that I use:

  SDK: 10.1

  Feature Q10: with version 10.2

  IDE: Momentics version 2.0

  Thanks in advance.

  Looks like the maximum (for the C API) is 5000ms.

  https://developer.BlackBerry.com/native/reference/core/com.QNX.doc.bps.lib_ref/topic/vibration_reque...

  This limit makes feel me like there is a missing documentation of the Qt version.

  I will raise a bug.