Œuvres VPN, no internet
My total configuration works on everything right now. BUT I can't access the internet by VPN. I read a user who had only to put its vpn on a different subnet mask. I tried, and I've lost access to network drives that I connect. I must be able to connect to a machine on the network & internet simultaneously for 2 programs. Please help - I don't know anything about networks - I find things myself. If you can give advise me, please keep a bit on the simple side. When I "add" things to see if they work, I'm not sure that I do it well, so please advise.
Thank you
Jana
Add to your config
access-list no. - NAT ip enable any 192.168.1.0 255.255.255.0
NAT (inside) - No. - NAT 0 access list
Standard Split-VPN access list permits 192.168.0.0 255.255.0.0
attributes of the strategy of group templevpn
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Split-VPN
Tags: Cisco Security
Similar Questions
-
R8000 Open VPN drops Internet connection
I have a router R8000 and sometimes when I go to connect by using the open VPN connection that it will show as connected but I don't have any internet access more. My connection log is below. The XXX is corresponding to my external IP address of the router.
I have the service defined on the port UDP 12970 type. Firmware version: V1.0.3.4_1.1.2
Journal will be in the next post, because there is a limit of 20,000 characters.
In fact, I found a way around the problem. If you change the Protocol to TCP UDP everything works fine. Don't know what the problem is with UDP though.
-
When I connect to the VPN on my laptop from home (using a wireless connection), I can't access the Internet.
Any help?
Hello
Depending on the system and its configuration, it is not always possible to solve this problem.
However, try this.
Make sure that the default route has NOT changed to the VPN server.
Open the properties of your VPN connection.
Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".Disable the feature from default gateway.
For the best solution if you are using a cable/DSL router which is also home VPN endpoint you can take the 'Off' the computer VPN.
Example, http://reviews.cnet.com/routers/instant-broadband-etherfast-cable/4505-3319_7-20292080.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Connected VPN, no internet.
Hi, I'm a fan of cisco that manages a network using ASA 5505. We changeed IP addresses from our main location yesterday (changing ISP) & I have reset all VPN connections. All but 2 came & worked. I have tried to solve all day & impossible. VPN connections, both in question are there, but the ordinary internet traffic does not. I can get the traffic through the VPN also, but not the internet traffic that is supposed to go out directly. I need help as soon as POSSIBLE. (I need another set of eyes that know a lot about IPSec Cisco ASA VPN connections). Thank you. I enclose the config from the main location & one of the locations that works on the vpn. I ended up spending an ASA of version 8.2 to 8.4. I'll upgrade it more shortly, but I really need to get traffic in these workplaces. I can you connected to my machine also to check if necessary. The ASA have multiple VPN connections on them & they VPN most work as they were before the IP address change. Thanks for any response.
I understand you want to internet - bound traffic from a remote site (for example piedmontrow) to exit directly from this location?
If so, the line:
nat (inside,any) source static obj-10.2.0.0 obj-10.2.0.0 no-proxy-arp
.. .will be a problem because it replaces the less specific global nat rule:object network obj_any nat (inside,outside) dynamic interface
I think you want that one to be in place (you can need to create an object for corp vs using the old 'name'):nat (inside,any) source static obj-10.2.0.0 obj-10.2.0.0 destination corp corp no-proxy-arp
-
Tunnel VPN remote Internet and VPN remote VPN from Site to Site traffic?
Hello
We try to remote traffic from our users VPN tunnel through our ASA 5510 as well as to allow the only access for remote user VPN traffic to the other end of the all our VPN site-to-site connected to the same ASA. Basically, we who want to VPN in the network in order to access all of our networks business. We try to get away with this without using split Tunneling.
I can currently get internal traffic from the remote user VPN to reach all other vpn site-to-site tunnels without the internet in tunnel. The problem is when I add the following statement to the NAT:
NAT (outside) 1 10.10.19.0 255.255.255.0 * 10.10.19.0 is the address of the remote VPN Client
Internet traffic to the remote VPN starts to get in the tunnel, but I lose the opportunity to reach one of the other tunnels from site to site by the remote VPN tunnel.
I also begin to receive the following errors in the journal of the ASA
3 July 1, 2009 12:34:18 305005 10.10.19.255 137 no group of translation not found for udp src outside:10.10.19.3/137 dst outside:10.10.19.255/137
Any help with how NAT statements must be defined for this work would be appreciated.
Thank you
Will be
Will,
the link of this post for your scenario of vpn hub & speak reference, you problem may be on exempt nat rules.
Have a second look at your sheep rules.
Be sure to eliminate tunnel rules related to rheumatoid arthritis, as appropriate, to not let him get in the way of splitting.
If always emits discribe topology for l2ls and info logic RA and sanatized hub config asa... but I think if you look at the thread above, you should be able to solve.
Concerning
-
Even IOS VPN Interface Internet Access issue
Hi all
I was wondering if there was any equivalent to these orders of ASA 5510 to put on a cisco IOS router 2811.
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list LOCAL_LAN_ACCESS
What I want to achieve is to give internet access to my vpn users without creating a split tunnel, which means the vpn user turns off the Internet on the same interface on that their vpn router ends.
Is a 2811 for this there docs? I could not find the doc for it...
TIA,
-Fred
Try this link
Public Internet on a stick
Rgds
Jorge
-
Termination of the client PIX VPN and Internet access from the same interface
Hello
VPN remote users connect to PIX (7.2) outside interface, but need to have these clients to access the Internet through the PIX outside interface as well. Need this because PIX IPs is registered and allowed access to some electronic libraries. One way would be to set up a proxy within the network and vpn users have access to the Internet through the proxy, but can it be done without proxy?
Yes, public internet on a stick
-
Client VPN prevents internet access from other computers on the network
Hello.
I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.
On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.
Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?
Thank you
H. Adams
Hello
Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.
Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).
Vikas
-
I have two related site but cisco 2801 two routers. I want to configure IPSec between two LAN tunnel. Is it possible to do that, even if the link is not the Internet? 2 sites are connected by optical fiber.
Concerning
In my view, it does not matter what link is in place as long as the connectivity is here. for example, we did a link back to back between 2 routers (or PIX) in the laboratory to test the ipsec vpn and it works.
-
Pix 501 VPN no internet Assistant
Via the VPN right front
The VPN remote access
Cisco-Client 3.x or later version
Group & pre-shared key (no cert)
EECA, Local
Pool configured VPN
.. all the standard stuff.
I can connect but I can't access the internet.
Issues related to the:
Why can I not see my network server? I can sort of map a drive by typing in the folder \\myserve\shared
Why I can't go on the internet when connected to the VPN?
5.0.07.0410 VPN client
PDM 3.0.4
PIX 6.3.5
Thank you
Yes, you can change it.
By the way, here is a good link to MS:
HTH.
Portu.
-
Cisco easy VPN access Internet without Split Tunnel
Hey guys
IM wondering if anyone has a config that can help me get access to internet via an easy vpn tunnel on a cisco 877 router.
Basically, we are traveling to be users able to use the internet through vpn, rather than using split tunneling. The reason for this is that we have several sites that are attached by lists of external IP access for some services.
We hope that mobile users to interact with these sites through the central router and use external IP of access routers secure sites.
I hope that makes sense. I know that we can use a proxy but we also use other services of bases no proxy on these sites, it would be rather routed direct access.
Thank you
Luke
Hi Luke,.
Please use the installation of the client VPN (complete tunnel) link below.
Note the useful message.
Thank you
Kasi
-
I try to get the client-based VPN running to our network (using our ASA) and ran to a catch. I could understand most of the settings and get the VPN is configured so that the user can connect. However, once connected, the user loses the internet connection. I tried searching around, but haven't found anything directly on point. There were a few references to the split tunneling, but I'm not sure that's what Miss me.
Anyone has any ideas based on my setup?
Thanks - Matt
Hi and thanks for posting
You need to add is the following:
attributes of Group Policy RA_VPN_Policy
Split-tunnel-policy tunnelspecified
If your group policy will look like this:
attributes of Group Policy RA_VPN_Policy
value of Split-tunnel-network-list foo_int_network
Split-tunnel-policy tunnelspecified
With these two commands educate you the client on the network to access above the tunnel, the rest of the traffic will flow through the local network where the client connects from.
Additional information:
ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA
http://Tools.Cisco.com/Squish/c1322
Let me know
* Please note any message that you find useful.
-
Layman to ASA 5505 vpn of the native vpn client internet, tcp 1723
Hi all
I am setting up this asa for connect users at home to my network using vpn clients from microsoft to the native address with windows xp on the internet.
This asa have, on the outside interface an ip public Internet and inside Board have set up in the network of 192.168.0.x and I want to access this network of internet users using native vpn clients.
I tested with a pc connected directly to the external interface and works well, but when I connect this interface to the internet and tried to connect to the vpn user I can see it in the newspapers and unable to connect with error 800.
Request TCP and eliminated from "public_ip_client/61648" outdoors: publicip_outside_interface / 1723 "
Can help me please?, very thanks in advance!
(running configuration)
: Saved
:
ASA Version 8.4 (3)
!
ciscoasa hostname
activate the password * encrypted
passwd * encrypted
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address publicinternetaddress 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network gatewayono object
Home gatewayofinternetprovideraccess
Description salida gateway ono
service remotointerno object
service destination tcp 3389 eq
Remote description
network pb_clienteing_2 object
host 192.168.0.15
Description Pebble client food bowl 2
service remotoexternopebble object
Service tcp destination eq 5353
Description remotoexterno
network actusmon object
Home 192.168.0.174
Description web news monitor
the Web object service
Service tcp destination eq www
Description 80
irdeto network object
Home 192.168.0.31
Irdeto description
network nmx_mc_p object
host 192.168.0.60
Main description of NMX multichannel
network nmx_mc_r object
Home 192.168.0.61
Description NMX multichannel reserva
network tarsys object
host 192.168.0.10
Tarsys description
network nmx_teuve object
host 192.168.0.30
Nmx cabecera teuve description
tektronix network object
host 192.168.0.20
Tektronix vnc description
vnc service object
destination eq 5900 tcp service
Description access vnc
service exvncnmxmcr object
Service tcp destination EQ. 5757
Access vnc external nmx mc figurative description
service exvncirdeto object
Service tcp destination eq 6531
Description access vnc external irdeto
service exvncnmxmcp object
Service tcp destination eq 5656
service exvnctektronix object
Service tcp destination eq 6565
service exvncnmxteuve object
Service tcp destination eq 6530
ssh service object
tcp destination eq ssh service
service sshtedialexterno object
Service tcp destination eq 5454
puertosabiertos tcp service object-group
Remotedesktop description
EQ port 3389 object
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
the DM_INLINE_NETWORK_1 object-group network
network-object object irdeto
network-object object nmx_mc_p
network-object object nmx_mc_r
network-object object nmx_teuve
tektronix network-object
object-group service udp vpn
EQ port 1723 object
DM_INLINE_TCP_1 tcp service object-group
EQ object of the https port
EQ pptp Port object
the DM_INLINE_NETWORK_2 object-group network
network-object object actusmon
network-object object tarsys
inside_access_in remotointerno permitted object extended access list a whole
inside_access_in list extended access allowed object ssh a whole
inside_access_in list extended access allowed object-group TCPUDP any any eq www
inside_access_in list extended access permit icmp any one
inside_access_in list extended access allowed object vnc a whole
inside_access_in of access allowed any ip an extended list
outside_access_in list extended access allowed object remotointerno any object pb_clienteing_2
outside_access_in list extended access allowed object-group TCPUDP any object actusmon eq www
access-list outside_access_in note Acceso tedial ssh
outside_access_in list extended access permit tcp any object tarsys eq ssh
outside_access_in list extended access allowed object vnc any object-group DM_INLINE_NETWORK_1
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access deny icmp a whole
access-list standard corporate allowed 192.168.0.0 255.255.255.0
Split-Tunnel-ACL access-list allowed standard 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
monitor debug logging
logging of debug asdm
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
IP local pool 192.168.0.100 - 192.168.0.110 mask 255.255.255.0 clientesvpn
IP local pool clientesvpn2 192.168.1.120 - 192.168.1.130 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
NAT (exterior, Interior) static source any service of actusmon of interface static destination Web one-way Web interface
NAT (exterior, Interior) static source to any destination interface interface static tarsys one-way sshtedialexterno ssh service
NAT (exterior, Interior) static source any destination interface interface static one-way pb_clienteing_2 service remotoexternopebble remotointerno
NAT (exterior, Interior) static source any destination interface interface static irdeto one-way exvncirdeto vnc service
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcp service nmx_mc_p
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcr service nmx_mc_r
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxteuve service nmx_teuve
NAT (exterior, Interior) static source any destination interface interface static tektronix one-way exvnctektronix vnc service
NAT (all, outside) interface dynamic source DM_INLINE_NETWORK_2
inside_access_in access to the interface inside group
Access-group outside_access_in in interface out by-user-override
Route outside 0.0.0.0 0.0.0.0 gatewayinternetprovideracces 1
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
EOU allow none
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 clientewindowsxp
IKEv1 crypto ipsec transform-set clientewindowsxp transport mode
Crypto ipsec transform-set ikev1 L2TP-IKE1-Transform-Set esp - aes esp-sha-hmac
Crypto ipsec ikev1 transit mode L2TP-IKE1-Transform-Set transform-set
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1 set transform-set clientewindowsxp ikev1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1jeu ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Crypto-map dynamic L2TP - map 10 set transform-set L2TP-IKE1-Transform-Set ikev1
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Crypto map L2TP - VPN - dynamic 20-isakmp ipsec L2TP-map map
L2TP-VPN-card interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
trustpoint to ikev2 crypto Ingeniería remote access
Crypto ikev1 allow inside
Crypto ikev1 allow outside
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd dns 8.8.8.8
dhcpd outside auto_config
!
dhcpd address 192.168.0.5 - 192.168.0.36 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd auto_config outside interface inside
dhcpd allow inside
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
SSL-trust Ingeniería out point
WebVPN
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
WINS server no
Server 192.168.0.1 DNS value
Protocol-tunnel-VPN l2tp ipsec
by default no
attributes of Group Policy DfltGrpPolicy
value of server DNS 8.8.8.8
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
internal engineering group policy
attributes of Ingeniería group policy
Protocol-tunnel-VPN l2tp ipsec
by default no
L2TP-policy group policy interns
attributes of L2TP-policy-group policy
value of server DNS 8.8.8.8
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Split-Tunnel-ACL
Intercept-dhcp enable
username, password Ingeniería 4fD/5xY/6BwlkjGqMZbnKw is encrypted nt privilege 0
Ingeniería username attributes
VPN-group-policy Ingeniería
password rjuve SjBNOLNgSkUi5KWk/TUsTQ user name is nt encrypted
attributes global-tunnel-group DefaultRAGroup
address clientesvpn pool
address clientesvpn2 pool
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
Group Policy - by default-L2TP-policy
authorization required
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
ms-chap-v2 authentication
!
class-map inspection_default
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
!
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:59b54f1d10fe829aeb47bafee57ba95e
: end
don't allow no asdm history
I ramon I guess that service policy is not applied in the firewall. So it does not not trust other than the same audience segment.
Apply like this.
global_policy global service policy.
because according to the configs old, I see that the policy has not been applied. Please let me know the results.
Please rate if the given info can help.
-
ASA 5510 VPN dedicated Internet connection
I have a 5510 ASA with a second internet connection on his way. I would like to have an internet connection dedicated to my VPN Site to Site traffic and the other left to manage the public internet traffic. I know that I can do this with a static route, but today, I noticed the "tunnel" option How exactly does the tunnel option work mode and it works better for my situation?
Rob,
(Simplification) "Tunnel" option tells what to do with traffic, once it has been for example inbound VPN decapsulted.
In your case, static routes for remote tunnel endpoint + RRI points will do.
M.
Edit: I would advise yo forget about the end of the dynamics of peers (dynamic IP L2L or ezvpn) solutions on any interface that does not have a default route on this subject.
-
PPTP connected cisco VPN but Internet not working
What wrong with my setup but my device not "connected to the internet, I use ubuntu 12.04 LTS
Cisco 1841version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system flash c1841-ipbasek9-mz.124-24.T.bin
boot-end-marker
!
logging message-counter syslog
enable secret 5 $1$eb9Q$7kMUF5Am0kVn/QXwssfrD/
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication ppp default local
aaa authorization network default local
!
!
aaa session-id common
dot11 syslog
no ip source-route
!
!
!
!
ip cef
ip name-server 202.134.1.10
ip name-server 202.134.0.155
multilink bundle-name authenticated
!
vpdn enable
!
vpdn-group PPTP
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
!
!
!
!
!
username ala***n password 7 051B131C2A4343
username fa***ul privilege 15 password 7 03520B59565F701C16594B51
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0/0
ip address 222.124.152.181 255.255.255.224
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
no mop enabled
!
interface FastEthernet0/1
description ====LOCAL=====
ip address 192.168.100.1 255.255.255.0
ip access-group 100 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
no mop enabled
!
interface Virtual-Template1
description ##PPTP TUNNEL##
ip unnumbered FastEthernet0/0
no ip redirects
no ip unreachables
no ip proxy-arp
peer default ip address pool PPTP_POOL
no keepalive
ppp authentication pap chap ms-chap
ppp timeout idle 360
!
ip local pool PPTP_POOL 192.168.101.110 192.168.101.125
ip default-gateway 222.124.152.161
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 222.124.152.161
!
no ip http server
no ip http secure-server
!
ip nat pool fahrul 222.124.152.181 222.124.152.181 prefix-length 29
ip nat inside source list 77 pool fahrul overload
!
access-list 23 permit 10.10.20.0 0.0.0.255
access-list 77 permit 192.168.2.0 0.0.0.255
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.100.0 0.0.0.255 any
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp host 203.197.12.30 eq domain host 121.243.96.154
access-list 101 permit ip 10.10.20.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 permit ip 10.10.10.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 deny ip 192.168.100.0 0.0.0.255 any
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip host 0.0.0.0 any
access-list 101 deny ip any any log
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
Inside the network is also not in the definition of NAT. Add the following:
access-list 77 allow 192.168.100.0 0.0.0.255
Sent by Cisco Support technique iPad App
Maybe you are looking for
-
Firefox sync only a no pair a unit option, so how can I add a device?
It's like https://support.mozilla.org/en-US/questions/993253?esab=a & as = aaqBut the solution has chosen the person did not work for me. 1 here is a picture of my synchronization options: http://I61.Tinypic.com/qqtovo.PNG2. the evidence that my Fire
-
"Could not open file for some reason any." Error message since then reinstall it.
I have recently restored OS X from a backup, the same (current) version of the numbers and I use the same files (one document, different versions tried), but since I only get the error message "... cannot be opened for some reason any." I found absol
-
HP Envy 15-j139TX: the BIOS using external storage recovery does not work.
My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash. I did research on the problem and
-
should I buy a drive for backup with my digital copy?
I am looking to buy Windows 7 Ultimate of MS online and would like to know if the backup drive is worth the cost. I read the posts that you can create your own backup disk and you can image your installation on a h/d for guard duty. But if these opti
-
How to activate my classic into a Hotspot? Please notify