Office 700-300z: power supply

Similar Questions

• Graphics upgrade of Office CQ5624P and power supply

  My PC is... Compaq PC desktop Presario CQ5624P w / graphics using nVidia GeForce 6150SE integrated & Internal 250W (100V-240V) total power: 250 w, power supply: •100-127V/8 has •200-240 v/4.

  PROBLEM: I would like to upgrade my graphics
  (but... * embedded video is not available if a graphics card is installed.) Also one but... NOTE: * built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time.)

  Question: I will lose all functions of e/s (VGA, USB ports, ethernet port, input audio & outputs) on the graphics card integrated if I update to an EVGA GT619?

  Regarding the power supply: what are the specifications for a better diet which is virtually "plug-and - go" compatible with the Office of CQ5624P? " (between 400W to 500W).

  I'm not a great player, I'm looking for a way to use a 50 "flat screen and my pc monitor at base of household use, movies and low end games... Help appreciated... Thank you.

  Hello again FLknights,

  I can't make a recommendation, but I can give you some information. First of all, the graphics card you are looking at is a PCI Express 2.0 x 16, and who can worry because you do not have a PCI Express 2.0 x 16 slot on your Board. If you are concerned don't be there is no difference that he connects on your Board, so it should work fine.

  Looking at the two UCP will work and both leave you with room for growth if you decide to go this route. You certainly need to change the power supply though as the 250 watt installed is not sufficient for the needs of new cards 300watts.

  In addition, the graphics card supports the operating system of Windows XP to Windows 8. For me, it would mean that you should also make sure that when you go to turn off the chart embedded in the BIOS you also enable Legacy Support or material according to what you see.

  I hope this helps. Thanks again for your post on the HP Forums. Have a great day!

• ENVY 700-327c: need Power Supply amperage on + line 12V

  I want to install a discreet graphics card in my new DESIRE c 700-327, who has a power of 300 W.  I need to know the available amps on the + line of 12V of power supply of the stock so that I could either one) choose a power card that works with the original, or b) improve nutrition.  Anyone know if the upgrade of the power supply will void the warranty?

  When in doubt, try the simplest thing first - look!  On the side of the PSU contained the information I wanted, unlike the HP PSU on my units of office earlier.  + 12Va - 12A line and + 12Vb line - 16A.  Don't know what line feeds the PCI-E slot, but neither is sufficient for the card I want to add.  Even my old EVGA Nvidia-powered card requires 18A on the + 12V line when it is matched witn an i7-4770.

• HP Envy 700-230: cards graphics/power supply for my computer

  Hello

  I have a hp 700-230, (http://support.hp.com/us-en/document/c04058435

  I'm looking to get a new graphics card for games. What grapihcs cards are good and compatible with this computer given its components and power supply (only 300 watts)? The geforce gtx 750ti or gt 630 works with this computer? AMD radeon 7770 work? If I want to improve my diet, which ones is compatible with my computer? If I do the power ugrade, what is a good compatible with her graphics card?

  Thank you! (and sorry for all the questions)

  Hello

  Without replacing your PC power, NVIDIA GTX 750 it would be a great choice, and it's the best of the lot that you referenced. Research the model NVIDIA GTX 750 that some models require a PCI-E power connector 6 pin auxiliary lacking the 300 watt power supply in your PC.

  These articles HOWTO HP should be useful.

  If you're running Windows 8 then note the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• I have a Microsoft Broadband Networking Wireless Base Station. MN-700. I need a power supply. I want to know if it is 12 v ac or dc

  I have a Microsoft Broadband Networking Wireless Base Station. MN-700. I need a power supply. I want to know if it is 12 v ac or dc?

  I expect 12 VDC...

  That said you will have to also make sure that the polarity of the plug of the adapter is correct, IE. Center positive or Center negative.

  http://en.Wikipedia.org/wiki/Polarity_symbols

  These guys here claim to have one available for sale...

  http://www.unitedsale.com/AC-adapter-for-FA-4A110-Foxlink-12V-1A-Microsoft-MN-500-MN-700-router-brand-New_p_329.html

  As Mike well your really better off upgrading to a newer device that would support encryption WPA2 IMHO...

• Replacement power SUPPLY - 700-210xt Envy

  I'm looking to replace the electric power of my pc (http://support.hp.com/us-en/document/c03975089

  With this power supply: http://www.newegg.com/Product/Product.aspx?Item=N82E16817139051

  I just want to know if his will adapt or be compatible or etc.

  Thank you!

  Hello

  The Corsair CX750 is subject. 8 "longer than your power supply. Open your PC and see if you have enough space between the optical and food drive. It's going to be a very tight fit.  You can remove the front panel and slide the optical drive to the front for ease of installation.

  Review of the HP position articlepresent.

  I generally recommend the CX500, or CX600 because they correspond to the physical dimensions of the HP supplies.

• HP ENVY 700-527c: upgrading of power supply and graphics card, need help

  You just bought a NVIDIA - GeForce GTX 970 4 GB GDDR5 PCI Express 3.0 Graphics Card - silver/black for my HP ENVY, but the food I have in my computer does not support this graphics card. So I was wondering if I bought the Black Corsair - CX series modular CX750M 750W ATX Power Supply - if it could fit in my computer and function properly with the graphics card and all the rest of the computer.

  Almost thought you made a mistake, but you do not have BIOS rev 8 because this unit originally comes with WIN 8. The GTX 970 attracts only 145W. Corsair CX750M is3.39"x 5.91"x 6.30".  It is profoundly in your case, without connectors.   You have so much room between the existing power supply and connectors for DVD?  NVidia recommends a 500W, I would say the 600W modular version.   Its depth is 5.51 ".

• HP Office Jet 6700 Premium: question of power supply?

  Printer was working fine. In the middle of the night, there was a power failure. Now, the printer does not illuminate. The power indicator led lights when the power supply is plugged into the wall. It will remain on until the adapter is connected to the printer. Then the light goes off. The light not come back up until the power supply is disconnected and then reconnected the wall. The printer is almost 3 years old in April. The brilliant minds of ideas of the internet?

  Does not look good. Be sure to try combinations of unplugging and pressing the power button to see if you can get the printer to wake up. If you are out of luck... no luck.

• cannot fine internal power supply form new sound card

  Just installed the asus xonar dx card in my slimline s5670t office. The problem I have is that I can't find the power supply 4 pin I need on the mobo. Can someone help me?

  Here are thespecifications of the motherboardof your PC.

  You probably need to look for a connector 4-pin molex or floppy disk which cuts off the power supply.  If your don't see a spare connector, then you will need an adapter for the splitting of a molex connector or even disable a sata power connector.  Look carefully at the power cable goes on the hard drive.  That's where you could try a power cable Y splitter.  www.Newegg.com has probably want you need.

  Maybe thisadapterwould work.  I can't tell if the connector is good to type the disk sata for power or if the cable lengths are long enough.

• I3 4130 map graphics and Power supply

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  Andrew, welcome to the forum.

  andrewmorgan98 wrote:
  

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  A: I definitely recommend that you try the EVGA GTX 750 Ti.  I read a lot of good things about it.  It does not all the connectors extra power on the power supply.  Regarding the PSU in HP computers is lousy, the fact is that they install the power supply that is compatible with the OEM components.  Even if their computer can be upgraded, they design that enable out of the box.  You can try with the current 300W PSU, but if it does not work, I suggest you buy a power supply at least 500W; 600W would be even better for futute upgrades.

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  You can see my answers to your questions above in orange.  As suggested, the GTX 750 it should work for all the games you mentioned.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Elitebook 8460p: is my power supply dead/dying?

  OK, so for Christmas, I got a HP Elitebook 8460p. Everything was fine, except that on the 3rd day, something terrible happened.

  Day 1 (Christmas): the laptop set up, new installation of Windows 7. Minor only freezes occor all seconds for half a second about. "Upgrade Bay" does not work, made just 2 short grinding noises when closed after opening

  .

  day 2: even freezes. That night, I run a disk check before going to bed. (Don't ask me what are the results, because I fell asleep during the test)

  Day 3: incredibly slow Windows now. Starting about 15 minutes, and answers may last from 1 to 5 minutes, never even.

  Symptoms: my HARD drive light is constantly on, however I ran many tests my self and even the player was tested for possible errors and he spent everything. Running Windows from a disk external DRIVE is fine and going at normal speed (for an external that is). When I push the switch down to close the laptop, there is a sharp wail (only half a second). My internal battery cool and is holder of a load at normal speed, only when the internal HARD disk needs accesed for anything on any platform, it's very very slow.

  What I tried:

  Defrag: Windows disk shows the fragmentation of 27%, however any attempt not to defragment that lead to progress stuck at 0% defragmented.

  SeaTools: Spent Seatools smart test.

  Reseting BIOS: BIOS reset by using the option in the BIOS.

  Store testing: took the laptop computer to the store and paid $20 for them to test, it passed all tests.

  Auditor of Windows errors: found mistakes (I've marked recovery of bad sectors and fix file system errors) and fixed (I have this on the external HARD drive that was running windows 7).

  If this is not the power supply, I have no idea of what is more. Assistance to access the drive HARD internal from the external windows copy is still slow, so there is nothing to do with the problems of corruption or OS driver I know. If you need more technical info let me know. I really don't care about the short freezes more, I just want to be able to use my new laptop if anyone can help me identify the problem I love them. I'm just suspecious of the PSU now because of her crying when being cut.

  Well, after reciving absolutely no help on this subject, I finally concluded that my HARD drive is indeed bad. I took it on my laptop, it was hooked up to my office, it's still slow respondent (although a little faster) and the HARD drive is also still on. The only reason why I come back to this post is someone else do it who is having these symptoms:

  -HARD disk always turn on.

  -HARD drive passes all the tests.

  -Great answer/access times (for me, it would take an hour or more just to get windows 7 booted up and logged).

  -No real lag, just windows waiting on the HARD drive.

  -Crazy waiting for HARD disk defragmentation time (Mine was going to take a week + and there by about 33% fragmentation)

  -Small amounts of offset or "stutters / hiccups" than occor all few seconds (about once every 3-4 seconds for me) (this applies only if the HARD drive worked before).

  -A small, short, high-pitched shrill when the computer is forcibly stops using the power button.

  My HARD drive exposes all of these symptoms. If your HARD drive is having these same questions, sorry to say, but you'll probably have to get a new HARD drive or get an SSD. The good news is that HARD drive prices have fallen since SSD majorly became public.

  42 people have seen this post but not one bothered to even try to help. I am very disappointed.

• How to change the power supply to the CD/DVD drive so that it is disabled by default?

  When running on battery I often use the icon 'Remove hardware safely' XP to 'unplug' the carpet * CD/DVD drive for Safe some battery life. (Does?) I use Fn + Tab to bring back to life. I wonder if there is a way to make my boot Notebook (M400) with the power supply to the reader off by default. Moreover, any idea where I can find the extra battery for the slot of the CD/DVD player and who the price?

  Thanks in advance for your help.

  Hello, Robert

  If you see the start page, you will see that this support forum is not a type of support Toshiba directly but forum users. But you're not alone and many users expect that a Toshiba support team sit in the office and before writing the answers.

  In any case, there are many users of Toshiba laptops with very good knowledge and also amateurs who are trying to help the other guys in different problems and also to share own experience.

  Professionalism is not the forum but action when you need help because of physical damage or something similar. If you need assistance and competent answers each authorized partner must be able to provide the info you need. But please don t mixture and Toshiba service partner because it is not the same.

  In any case, I found the info you can use additional (second battery expansion) and it takes batteries with PA3510U-1BAL, PA3510U-1BRL room numbers. I can't tell you how much it costs, but you will find only using Google.

  Back to your first question: if I understand you just want to save more power and because of this, you want to sign out ODD. It's a nice idea, but you have clearly misunderstood something. "Safely Remove Hardware option is there to help the operating system and and say this material, a part will be removed and don t exist anymore, but it does not physically the disconnection of any other material."

  If you need more power use a second battery and enjoy your life.

  If you have any other questions you are welcome. A lot of users here M400 and I hope in the future that some of them will participate in a little more.

  Good day! :)

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.

• HP Envy 750-116: can anyone recommend an upgrade of the power supply for HP Envy 750-116?

  I have a HP Envy Office 750-116 and need to replace the power supply 300W with an upgrade to a more powerful.

  I was look at is CORSAIR CXM CX550M 550W 80 PLUS BRONZE or the EVGA SuperNOVA 650 G2 80 series. I have kniow that they are all two excellent PSU.

  My concern is with the connector that the 750-116 uses to the optical drive. Looks like the kind of connector you see go to a laptop, DVD player. (It of really small and is marked P5)  I have a spare part HP 460W PSU I could use, but it is not a connector that would work. So I hesitate to buy Corsair or the EVGA without knowing if I'll be able to plug into this weird DVD connector in the HP Envy.

  Someone out there has run into that and find an answer?

  Bill

  Optical drives are still a thing? Wow! Any ways OP. On these new machines. HP uses a slim with an owner drive

  Connector for it. You won't find it on the other PSU. You will have to abandon the drive if you replace the stock PSU.

• new power supply for a6319fh

  im going to be upgrading my diet so I can update my graphics card. the vehicle currently has a 250w power supply and I want to go between 450-600w. I need to know what brands will certainly adapt to my case. I have a processor intel dual core and im on vista sp1. also the new power supply will require an update of fan? any help will be greatly appreciated.

  Given that this case is an office of size, or it seems, you should be able to use a standard ATX power supply box.  To be sure, take it with you for the purpose of comparison or get the dimensions.  The fan is usually part of the diet, unless you want to say the "fan" which will probably still be OK, too.