Office all-in-one printer emits Jet J4680

Similar Questions

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• The jet office 4315 all-in-one: printer plug on the Tablet?

  I have an apex Tablet and I would like to know if there is a way to connect my all in one printer for her so I can print from my tablet, I have a cord to hang them together but I'm assuming that could print from the tablet should I make the tablet to recognize the printer & I don't know how to do this. I used to use it with my desktop computer

  Hello

  Only a connected network printers are supported on a Tablet, the 4315 is a single USB printer and it is not supported by such a.

  Kind regards

  Shlomi

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• HP 6110 All in One printer will not scan to PC applications.

  I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

  Any ideas?

  Thank you

  ... WSF

  ... WSF

  WSF,

  Can scan you from your pc to the 6110, using the hp scanning software?

• HP Officejet Pro 8600 more e-all-in-one printer - N911g face 2 of copy or scan on adf?

  I just want to know if HP Officejet Pro 8600 Plus e-all-in-one printer - N911g can do 2 copy or scan on adf faces?

  Thank you.

  Hello

  Based on this, it can:

  Improve productivity in the office with this all-in-one performer who offers vibrant prints and marketing without borders
  materials. You can count on professional color documents for up to 50% lower cost per page per report
  with lasers.1, tap the touch screen to easy-to-navigate to access applications and print from the web without a PC2 - or
  print from virtually anywhere with HP ePrint.3 Boost efficiency in your office with Ethernet and wireless
  connectivity, 4 automatic two-sided printing, an automatic document feeder 50 sheets (ADF) and digitization of glass to the top
  legal - size.5

  Kind regards.

• How to send by fax the laptop using the network all-in-one printer

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

  Your all-in-one printer supports this feature?  Check its manual to see if it does.  Just because it is connected to the network and contains a fax equipment does not necessarily mean you can send a document to him and use the fax to send to someone else.

  'Surace' wrote in the new message: * e-mail address is removed from the privacy... *

  I have an all in one printer with network connections in my office, how can I send faxes from my laptop

• Printers HP j4680 all-in-one: report of transmission J4680

  I have a HP j4680 all-in-one printer and am running Windows 7.  I no longer receive the audit reports of transmission when I send a fax.  I received of these reports, but for some reason any printer no longer prints this form after the fax is sent.

  Hello @Basha2,

  Welcome to the HP Forums!

  I hope you have a pleasant experience here.

  I want to help you with the confirmation report of fax on printer all-in-one HP Officejet J4680.

  I don't know why it would stop printing. Did you do any sort of reset of the printer? Or make changes to your configuration? Either way, here are the steps to make sure that it is turned on:

  1. On the Panel of your printer, tap the Setup button (it looks like a key).
  2. Press the right arrow until you see print the report to the screen. Press OK.
  3. Press the right arrow until you see Fax of Confirmation on the screen. Press OK.
  4. Press OK when you see IT, on the screen.

  I hope this helps!

  

• my hp all in one printer/scanner is not list scanner

  I had this hpdeskjet f2480 all-in-one for a couple of years ago, this afternoon, I decided to clean my desktop computer.  I unplug my all-in-one, he moved 2 feet, cleaned my office, plugged my all-in-one, and now, it's only to show that it is a PRINTER!  I printed something earlier in the day, but I've never known this kind of thing when I dissconnect for cleaning, Help!  I know that I can't find the cd that accompanies all of this into one, so reinstall?  How would I do that?  I scan a lot of things and I need my all-in-one to an all in one!

  Hello @unicorn1 , welcome in the back

  I hope to help you with my suggestions for the problem you are having with the scanning function with your Deskjet F2480. I really don't know what could happen with what you have explained, perhaps the software has been modified in some way.

  Nevertheless, try to run the installation again to ensure that the full feature is installed, which includes the scanning software.

  Click on this link, to choose what operating system you have, click drivers and download the software. When it is finished, start the installation and follow the on screen instructions ended and the printer is installed completely.

  HP Deskjet F2480 all-in-One Printer Drivers

  Let me know the results. Good luck!

  Happy Tuesday

• XP starts from the USP port to which is attached a HP Photosmart 5520 e-all-in-one printer

  After installing a "HP Photosmart 5520 e-all-in-one printer" on an XP wihe a USB cable, the system tries to boot from USB port to which the printer is connected then.

  Installation gave no problems.

  To then begin XP - PC, the printer turnof.

  The bootsetup: first is the HARD drive. Who can help?

  Hi, welcome to the Forums of HP!

  I understand that your office is the start of your printer, and I'd be happy to help you!

  I suggest turning off your computer and unplug the USB cable to the back of the printer. Once the printer is unplugged and turned off, please re - turning on the PC. Condition that the computer starts well, please follow this document on the updated the BIOS on the PC. Once the update is complete, please reconnect the printer (USB) and power back on. Once again, please turn off the computer and turn it back on.

  If the computer still starts at the printer, please disconnect the USB cable to the printer. Turn off the computer and turn it back on. That it starts properly, run your antivirus software to search for viruses. I also have to know product and model number of the desktop for further research.

  I would ask you re-post with the results of your troubleshooting, and I follow diligently with you!

  See you soon