Office communication target RT PC with host via RS232

Similar Questions

• My MS Office Communicator opens when I click on 'Connect with instrument' on Measurement & Automation Explorer.

  Hello

  Recently I am having problems using the option "contact instrument" on measurement and Automation Explorer.  When I tried to click on 'communicate with instrument' button, my MS Office Communicator starts to open, then an error message appears indicating that "specified address is not recognized or does not exist. With this, I can't use MAX Explorer

  for the purpose of debugging. Apart from this problem, communication between my PC and my instruments are okay during the VI run. Hope you could help me with that. Thank you!

  I see this on two machines in my group too. Bringing this back to the top to see if we can get an answer. What do you think of gurus OR?

• Problem with JMS via the SSL protocol in clustered environment

  Hello
  
  We run Weblogic 11 g Cluster (area) which consists of admin server and two managed server MS1, MS2.
  LIKE and run it on the computer 1, MS1 MS2 runs on machine 2. Both machines have two network interfaces, a public used for client connections and an intern for cluster communication, monitoring etc. The default channel of each Weblogic Server is listening on the internal network interface, and Moreover we have two channels (for http and t3 Protocol) configured to the public interface.
  The two managed servers are JMS provider and there is a JMS Module myModule in the field with the following JMS resources: custom connection factory myConnFactory (Load Balancing active = true = false server affinity, target: entire cluster JMS) and myQueue, which is a uniform distributed queue (targets: MS1, MS2). The queue is accessed by its logical JNDI name, but she is stuck on each managed server.
  
  JMS communication flows normally through t3 dedicated listening on the public interface. However, a new external client will send messages to myQueue and communication must be encrypted for security reasons. For this reason, we have implemented SSL. Instead activate a DefaultSecure channel, we left 'SSL listen Port active' = false (as the default channel would be linked to the internal network interface) and created a new channel T3SChannel t3s Protocol on the public interface for incoming client connections.
  
  The customer creates a t3s connection to the cluster (through T3SChannel) and gets the factory connections and the queue, use the JNDI ( source) search. The JMS connection is in real-time with MS1. If we want to create two consumers for this queue, the consumer of fist is created the MS1 and the second will be created on MS2 (thanks to active balancing). However, the creation of the second consumer fails with an exception (it is thrown on the client):
  
  java.rmi.ConnectException: no valid port known for: "DefaultSecure [t3s]: t3s (t3s): mserver1 - internal .company .com: 56213:null:-1 ';" No router available at destination
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:396)
  at weblogic.rjvm.RJVMImpl.ensureConnectionEstablished(RJVMImpl.java:303)
  at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:347)
  at weblogic.rjvm.RJVMImpl.getRequestStreamInternal(RJVMImpl.java:610)
  ... 18 more
  
  We were told that the exception can be avoided with t3s < default protocol > - < / default protocol > element (default is t3) added to the config.XML in the Weblogic domain. If we configure t3s as default protocol, we also need to activate the DefaultSecure channel on each server and then everything works and the customer is able to correctly create consumers.
  
  However, as a side effect, the entire cluster on weblogic.rjvm communication layer and then by t3s. We do not want that because internal cluster communications are set enough with other methods and it will have impact on the notable performance in the production environment. In principle, it should be possible to enable the external client to connect to the JMS provider via the channel new, safe, without affecting the existing internal communication in the cluster (which should be a black box for the customer).
  
  My question: is it possible to run the example described without defining the default protocol to t3s?
  
  Thanks for the reply.

  My question: is it possible to run the example described without defining the default protocol to t3s?

  Thanks for the very clear problem description. I checked with our customer support guru and I'm sure that the answer to your question is no, I think you have encountered a known problem and have already struck with the recommended workaround.

  That said, you can be able to avoid at least partially the problem by setting "server-affinity = true" on your CF. as you probably well know, affinity = false encourages consumer and producer traffic to route customer, on its server host connection, then possibly on a "second leap" to another server in the cluster. It looks like the attempt of an implicit downgrade of a secure request origin SSL in the first bond on a channel not secure in this second jump is to throw the exception.

  HTH,

  Tom

• Filter junk e-mail in Microsoft Office Outlook 2007 (KB976884) fails with the error Code 1603 (or 1402) in Windows logs when using Windows Update in Windows 7

  It's more for info, but it would be great if MS past this info to their developers so that the Windows broken for KB976884 update package can be fixed.

  Newspapers MSI mentioned above show the following error information, all related to being too restrictive registry permissions.  Perhaps the restrictive registry permissions are design due to the product; in which case the update package must be fixed.

  Here are the logs in order, that they do not have:

  1. Error 1402.Setup cannot open the UNKNOWN\Components\1FA18F7974E099CD0AF18C3B9B1A1EE8\00002119E20000000000000000F01FEC registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, seePSS10R.CHM.
     = Logging stopped: 2009-12-21 10:16:07.
  2. Error 1402.Setup cannot open the UNKNOWN\Components\1FA18F7974E099CD0AF18C3B9B1A1EE8\00002119E20000000000000000F01FEC registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, seePSS10R.CHM.
     = Logging stopped: 2009-12-21 12:16:07.
  3. Error 1402.Setup cannot open the UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\00002119E20000000000000000F01FEC registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, seePSS10R.CHM.
     = Logging stopped: 2009-12-21 12:43:10 =.
  4. Error 1402.Setup cannot open the UNKNOWN\Components\2562336682C91B850AF18C3B9B1A1EE8\00002119E20000000000000000F01FEC registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, seePSS10R.CHM.
     = Logging stopped: 2009-12-21 12:59:35 =.
  5. Error 1402.Setup cannot open the UNKNOWN\Components\6F949E36CB3004C50AF18C3B9B1A1EE8\00002119E20000000000000000F01FEC registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, seePSS10R.CHM.
     = Logging stopped: 2009-12-21 13:02:51 =.

  Resolve open Regedit and search on the first GUID after components.  The full registry path you are looking for is "HKEY_LOCAL_MACHINE-1-5-18\Components\.

  Don't find the GUID "00002119E20000000000000000F01FEC" as there are hundreds of entries and you will be forever.

  For example, in find point 5 '6F949E36CB3004C50AF18C3B9B1A1EE8' you will see that the key has void key and one of these sub keys will be '00002119E20000000000000000F01FEC '.  When you select '00002119E20000000000000000F01FEC' you will see you get "access denied".

  First STEP: right-click on the "00002119E20000000000000000F01FEC" subkey and select "permissions".  Windows will tell you that you can view this subkey.  Click on the "Advanced" button and click the group to select the 'administrators' tab 'Property' under ' to a change in ownership: "& check the 'Replace owner of subcontainers and objects' option click on 'APPLY '.  If you click on 'OK', you will get access denied.

  STEP 2: select the "permissions" tab and make sure that both the "Include permissions can be inherited from parents of the object" & "Replace all permissions of child object with permissions inheritable from this object" options are checked.  Click 'APPLY '.  Do not click on 'OK' you will get "Access denied" yet

  Repeat the steps for each GUID registry and then try and install the update via Windows Update.

  Whenever you see an error in the update Windowsw it generates an error log and stores it in the Temp of Windows folder, normally located in C:\Windows\Temp.  Sort by date to get the last newspaper at the top.

  The error logs are normally preceded by MSI in the form MSIxxxxx.LOG.

  I hope this works if you can not get rid of this error, but I would have preferred that ms fixed properly!

  Good luck

  See you soon

  Pete

  Hello
  Welcome to the Microsoft answers site

  The question you have posted is related to Microsoft Office, and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Office Communications Server 2007 R2.

  Office Communications Server 2007 R2.

  My OCS R2 server is fully functional internally. I have a problem with Live Meeting, audio sound system works internally without any problems, but when my external users connected to the live video meeting worked well but Microphone icon is grayed out for all users. I've been checking all the settings and everything looks ok. Can someone help me please...

  This question is part of better in the TechNet forums, where server gurus hang out.  This forum supports people who have questions or problems with Windows and the performance of their computer.

• Office Communicator to Lync migration?

  Is there a way to migrate contact lists from Office Communicator 2005 to Lync 2010?

  You can get help with Lync by creating a new post on the forums TechNet here: http://social.technet.microsoft.com/Forums/en-US/ocsclients/threads

• Office Communicator 2007 goes into hibernation

  I have a user in a discussion of the technicians, including connectivity Group turns off periodically during the day.  To return to an active state, she enters a period of {.} and return hits, obviously not everyone is involved at some point, but we are all [surveillance] online during the day for the resolution of immediate problems.  This user is the only one in the group with this issue.  I uninstalled Microsoft Office and Office Communicator and re-installed, but the problem persists.  All workstations are set up from the same system image file.  Anyone ideas what to do next?

  Hi Tim,.

  The question you have posted is better suited in the MSDN forums. Please see the following link for more information.

  Microsoft Lync Client Development Forum

• Communication between Labview and Acton spectrometer via USB or RS232

  I'm trying to communicate between a PC running XP and a spectrometer to Acton 2300i using Labview.  Windows recongizes the specification and assigns it to COM3 with the correct name.  Also, the software provided with the specification can communicate with him.  However, I was unable to communicate using VISA in Labview.  I downloaded the simple read and write example vi fromt the example finder and changed the entries at 9600 baud... but I am still unable to connect.  I also tried connecting via software of measurement and automation NOR, but getting the timeout error code.  I was able to connect using GPIB of Labview for another more old Acton Spec 500i but the onle new version connects via RS232 or USB.

  The problem was simply not having a return of carrage added at the end of my order.  Thank you for your help.

• Read text file on a desktop used as target RT to the host PC.

  Hello

  I'm using LabVIEW 2012 and I want to read a text file on your desktop PC used as target RT to my host computer.

  What is the the path to the target RT?

  Thank you very much

  Hi msad,.

  Why don't you use the ftp functions to access a file by ftp address?

• A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643

  A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.

  He did this repeatedly over and over again all week.

  How can I fix it?

  Hello

  Method 1: download and install the update manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294

  Method 2: Perform the steps from the link below and see if it solves the problem.

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  Hope this information helps.

• Can I install Office 365 in a PC with Windows Vista Home premium

  Can I install Office 365 in a PC with Windows Vista Home premium

  No, you do not have Windows 7 or newer.  Windows Vista lost all support and compatibility years.

• Can someone tell me how to run Office Communicator so that it is always on when a user opens a session? __

  Hello

  Can someone tell me how to run Office Communicator so that it is always on when a user opens a session? We want people to turn it off.

  Thanks in advance

  http://Office.Microsoft.com/en-AU/Communicator/default.aspx

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  See you soon.

  Mick Murphy - Microsoft partner

• my hp 6500 has more all in an office jet is not printing with magenta and yellow why colors?

  my hp 6500 has more all in an office jet is not printing with magenta & yellow why colors?

  Well! Wish we knew what caused the problem, but I am very happy, it is corrected! Please post if there are other problems!

• Problem installing Office Communicator of blackBerry Smartphones

  I'm trying to install Office Communicator on my BB Curve and whenever I get an error about the application of the unknown. The version of my BB is 4.3.0.124 (Platform 3.1.0.71). I tried office communicator v4.0.0, v4.2.0 and Office Communicator 2005 v.4.6.0... and every time I got the same message.

  Has anyone had this problem?

  Thank you

  The f

  It was the only way to get around, was to use a desktop redirector, but you would still need a Microsoft exchange.

  Please solve the message, OK?

  Thank you

• BEA-000362 &lt; server failed. At least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If the database is selected, then DataSourc

  My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none.  I can't even to the Server Admin page.

  Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory

  Help, please! Thank you!

  Joe

  ****************************************************************************

  # < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. >

  # < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content:

  C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. >

  # < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >

  # < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. >

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool.

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. >

  # < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version:

  WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer.

  Listening address: 7001

  Address public n/a

  True active http

  Tunneling Enabled false

  Outgoing Enabled false

  Admin traffic enabled true fake license to ResolveDNSName >

  # < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer.

  Weight of the channel 50

  Accept the rear 300

  Timeout 5000ms

  Message Max Size 10000000

  Timeout message 60 years

  Timeout of 65

  Tunneling Timeout 40 s

  Tunneling Ping 45 s >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. >

  # < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows:

  awt. Toolkit = sun.awt.windows.WToolkit

  leader. Encoding = Cp1252

  leader. Encoding.pkg = sun.io

  leader. Separator =.

  Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment

  Java.awt.PrinterJob = sun.awt.windows.WPrinterJob

  Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar

  Java.class.version = 51.0

  Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed

  Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext

  Java.Home = C:\JDK17~1.0_6\jre

  Java.IO.TMPDIR =

  Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;.

  Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory

  Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url

  Java.Runtime.Name = Java (TM) SE Runtime Environment

  Java.Runtime.version = 1.7.0_60 - b19

  Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy

  Java.Specification.Name = Java Platform API Specification

  Java.Specification.Vendor = Oracle Corporation

  Java.Specification.version = 1.7

  Java.Vendor = Oracle Corporation

  Java.vendor.URL = http://Java.Oracle.com/

  Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/

  Java.version = 1.7.0_60

  Java.VM.info = mixed mode

  Java.VM.Name = VM Server Java hotspot 64-Bit

  Java.VM.Specification.Name = specification of Machine Java virtual

  Java.VM.Specification.Vendor = Oracle Corporation

  Java.VM.Specification.version = 1.7

  Java.VM.Vendor = Oracle Corporation

  Java.VM.version = 24, 60 - b09

  javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder

  javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl

  javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl

  org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB

  org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB

  OS. Arch = amd64

  OS. Name = Windows 7

  OS.version = 6.1

  Path.Separator =;

  Sun.Arch.Data.Model = 64

  Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes

  Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin

  Sun.CPU.endian = little

  Sun.CPU.isalist = amd64

  Sun.Desktop = windows

  Sun.IO.Unicode.Encoding = UnicodeLittle

  Sun.java.Command = weblogic. Server

  Sun.java.Launcher = SUN_STANDARD

  Sun.JNU.Encoding = Cp1252

  Sun.Management.Compiler = HotSpot 64 bits compilers Tiered

  Sun.OS.patch.Level = Service Pack 1

  User.country = en

  User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain

  User.Home =

  User.language = en

  User.Name =

  User.TimeZone =

  VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap

  WebLogic. Name = AdminServer

  WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server

  WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server

  . >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. >

  # < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. >

  # < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. >

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >.

  # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >

  # < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. >

  # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. >

  # < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. >

  # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >

  # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions.

  # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. >

  It may sound crazy that I am answering my own post.  As he complains about MigrationBasis.  I tried to go to the config.xml file and changed

  Cluster-0

  unicast

  database

  TO

  Cluster-0

  unicast

  consensus

  And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration.

  Joe