HP Envy 15-j092nr: Clean install - drivers must, please.

Similar Questions

• HP Envy 5644: My hp envy 5644 does not install drivers for my laptop

  my HP envy 5644 some drivers will not install and cannot use the eprint button. tried to click on the set up button and accept the terms of use, but he said: "the printer cannot connect to the server...". "I printed the report and the diagnostic results: PASS all except the DNS: confirmed in case of FAILURE. I followed the instructions for the solution indicated on the report but nothing happened.still the same. I have not the scan doctor on my desk since I can not install.part of the software is installed, the portable computer recognizes the printer. I can't turn on the printer web services. tried pressing the eprint icon, turned again, and the fact the educated solution but nothing happened. * use the Wi - Fi

  Hi @CuriousMind,

  Welcome to the HP Forums!

  I see that your HP Envy 5644 will not install the drivers for your Windows 7 laptop. I'm happy to help you!

  To download the scan doctor, see this website, HP print and Scan Doctor.

  Otherwise, I recommend you to go through this guide, a "cannot find the printer ' display the error to the HP ENVY 5640 and DESIRE 5660 e - all - in - one printer series."

  Hope this helps and have a great day!

• HP Envy spectrum 14 Clean installed Windows 8, no audio signal?

  Hello! Recently I clean installed Windows 8 and now my sound does not work. Beats logo is not turn on like it used to, and by pressing the Control Panel audio side button does nothing. However, the volume scroll still works and the mute button always works.

  My model number is 14-3017NR.

  Edit: Headphones does not work either. According to me, Miss me probably all of my drivers. Is there an easy way to upload everything?

  Thank you!

  Hello

  Please install 'IDT High-Definition Audio Driver' using the following driver:

  FTP://15.192.40.10/pub/SoftPaq/sp58501-59000/sp58746.exe

  Kind regards.

• ENVY dv6t-7200 Clean install

  I tried to do a clean install of Windows 8 on my new computer laptop. WIndows kept saying that he needed some media driver and it wouldn't let me continue. Any ideas what it could be?

  Hello alouche,

  If she did not come preinstalled with Windows 8?  Why are you in need of a new facility?

  All your drivers are stored here

  Please let me know if this helps solve your problems.

  Good luck!

• HP envy h8 1569: clean install of win 8.1 for ssd

  I want to upgrade my computer with an ssd.  I would like to do a clean install.  I'm Henry key for the operating system. It is not the system operating provided ith the system but I updated to win 8 to 8.1.  Can I do a clean install with this information and the iso file downloaded from Microsoft?

  Thank you

  Hello

  See the following link.

  http://Windows.Microsoft.com/en-GB/Windows-8/create-reset-refresh-media

  Kind regards

  DP - K

• NTLDR missing in Windows Vista (Clean Install). Help, please.

  I have a Dell laptop which comes preinstalled with Microsoft Windows Vista Home Premium. A few days ago I reinstalled Windows vista with the Vista CD provided with my Dell computer.  Everything went well. I even had SP2 installed for vista. Suddenly, without warning, I get this error message: "NTLDR missing_ press any key to restart '. I can boot is no longer. I need your help! Thank you!

  A few points to consider:

  • I tried all the Vista DVD repair options, including restoring the system.
  • My computer NEVER had XP (EVER) when I say never, I mean. I'm emphasizing this because all the foums I look, people are you answer saying, data are left form XP or an earlier version of windows Installation. This may not be the case for me!
  • I tried Windows 7 RC on my laptop. (It has now disappeared)
  Once more, I really appreciate your help!

  Hello

  Your boot sector is damaged and a startup repair is the best option. You can also follow the steps detailed here: http://support.microsoft.com/default.aspx/kb/927392?p=1 to fix it manually from WinRE.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP envy 14-2090eo: in what order should drivers installed better when you do the clean install

  Hi HP experts...

  I want to do a clean install of my Windows 7 Home premium 64-bit, and I've always used my recovery disks when it was necessary to format and subsequently updated all the drivers in the support section and drivers HP, but it is a slow process, and I'm not even in what order I should update drivers when it that way or the other , and often a message jumped ud saying ' the driver is not properly installed - try again or the driver is installed correctly. But as mentioned, I want to do a clean install with my Windows 7 Home premium 64-bit disk and would like some experts advise on order in which drivers must be installed. Can anyone help?

  Best regards hpenvy1

  Hello:

  The order generally recognized installation of the driver is:

  1 install the chipset driver and restart.

  2. install the graphics driver and restart.

  3. install the audio driver and restarted.

  4 install the ethernet driver.

  5. install the wireless driver.

  Then you can install a driver you want.

  I also do a practice to update to the latest service pack before installing the drivers, if any.

• HP ENVY x 360 Convertible: unable to do a clean install of Windows 7 on a HP Envy x 360 (win 10 preinstalled)

  Hello

  I recently bought a HP Envy X 360 laptop for work. The laptop comes with Windows preinstalled 10.

  I'm doing a clean install of Windows 7 and during the installation, I get an error message "A required CD/DVD drive driver is missing. If you have a drive floppy disk, CD, DVD, or USB flash drive, please insert it now.

  Novel if the Windows installation media is in the Cd/DVD drive, you can remove safely for this step"

  I'm doing the installation via a USB key. The laptop has 3 USB ports and I believe these are all 3.0

  Any help is greatly appreciated.

  bryanhe wrote:
  

  Download the Intel Chipset from Intel of https://downloadcenter.intel.com/downloads/eula/25731/Intel-Server-Chipset-Driver-for-Windows-?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F25731%2Feng%2FIntel_chipset_10.1.2.10.zip software

  Download the USB3 drivers from Intel - https://downloadcenter.intel.com/downloads/eula/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Controller-Driver-for-Intel-8-9-100-Series-and-C220-C610-Chipset-Family?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F22824%2Feng%2FIntel%28R%29_USB_3.0_eXtensible_Host_Controller_Driver_4.0.4.51.zip

  Extract the drivers to packages

  create directories

  c:\Drivers

  c:\drivers\glb

  c:\Drivers\x86

  c:\Drivers\x64

  c:\temp\mount

  c:\temp\DVD_Files

  -the first is for the x 86 and x 64 so I put them in a directory c:\drivers\glb

  -l' other contains x 86 vs x 64-put-the separate directories in separate directories.

  c:\Drivers\x86

  c:\Drivers\x64

  (1) copy the ISO files from the DVD to install Windows 7 in a directory - c:\temp\dvd_files

  (2) mount the boot.wim file

  -dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\boot.wim / index: 1 /mountdir:C:\temp\mount

  DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb

  DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install

  DISM /mountdir:c:\temp\mount unmount unmount

  (3) mount the install.wim file

  -you know what image to update because the install.wim file contains all the images (except Enterprise).  If installing 64-bit Home Premium - that would be index 2

  -dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\install.wim / index: 2 /mountdir:C:\temp\mount

  DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb

  DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install

  DISM /mountdir:c:\temp\mount unmount unmount

  Copy your files to USB and everything should be good.

  Bryan

  I forgot something.  The boot.wim file has two images.  So after step 2, you must do exactly the same thing again but on index 2 like this:

  mount the boot.wim file

  -dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\boot.wim / index: 2 /mountdir:C:\temp\mount

  DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb

  DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install

  DISM /mountdir:c:\temp\mount unmount unmount

• Pavilion G6-1d21dx: necessary drivers after Windows 10 clean install on g6 (g6-1d21dx Pavilion) Pavilion

  I tried the HP support site, but I don't see any drivers for any available OS for my model, the g6-1d21dx Pavilion.

  I did a clean install of Windows 10, but the Wi - Fi button does not work. Apparently, there's a pilot called HP wireless button that I need to install. When I do a Google search for it, there is a link to HP's download page, but the link seems to be dead.

  HP allows us to download drivers more? It's frustrating, because drivers must be simple and easy.

  Can someone please tell me where I can get this and all the other drivers that I might need after doing a clean install of Windows 10?

  Thank you.

  Well, I think I solved the problem. The first time I did a new install of Windows 10, didn't have an Ethernet cable connected to the computer. This leads to all sorts of problems, including a lack of access to the Internet and some devices are not installed correctly. I reformatted the SSD drive and cloned my old hard drive, but that resulted in a very slow performance, then I would get errors every other time I start the computer (inaccessible_boot_device, unexpected_store_exception and kernel_data_input_error). In addition, the hard drive that I cloned has been running the 64 bit version of Windows 10, and I wanted to try the 32-bit version, because I want to use some software of old who will not run on 64-bit Windows 10 (for example, the Spanish dictionary Oxford SuperLex 3-in-1, French and German).

  Last night, I did another installation of the 32-bit version, but with a network attached cable. This time, after installation and update of Windows, all my devices appear to be installed and working properly. This includes the Synaptics touchpad, the HP wireless button, the AMD Radeon graphics card and the Realtek card reader. I didn't need to install whatever it is myself, and the Device Manager does not display the unknown devices. In addition, installation completed MUCH more quickly with the connected network cable.

  Conclusion: If you clean - install Windows 10, I highly recommend that you do so with a network cable attached so that you will have access to the Internet when it is necessary during installation. With fixed cable, both my wired network and my Wi - Fi network have been detected during installation. Wireless network connected, even my Wi - Fi was not available during the installation.

• HP Envy 17: Clean install Windows 10 without upgrade.

  Hello

  First of all, I am very happy with my new HP laptop first, it's amazing!

  Now my problem. The laptop came with 8.1 Windows preinstalled with a free upgrade to Windows 10, however, I want to do a clean install Windows 10 without going through the process of upgrading (or would defy a 'clean' install), without additional software (I have already downloaded all the drivers and software from HP Web site) and I wanted to make the installation of the driver/software myself.

  Now, I had the key OEM with software, however...

  I read several threads related to this problem, the recommended steps were required to use the creator of media, but that won't install it Windows 8.1? I know that I coud after upgrade, but I wanted to avoid this step

  In any case to create support for Windows 10? If I clean install 10 Windows with a retail key, I'll lose the built in recovery?

  Thank you very much for your kind attention,

  Best regards

  Francisco

  To answer your questions:

  (1) MS media creation tool: Activation in Windows 10 - Windows help offers several options: to upgrade this PC now, create installation media (download the ISO file), create an installation (DVD or USB) media.  Choose the option that suits you - understand that upgrading PC, this option does NOT create an ISO file or installation media.

  (2) lose the built-in recovery.  IF you ask on the resumption of Win8x HP - then Yes.  That no longer works after upgrade Win10.

  (3) retail vs upgrade and recovery: Version does not matter, you will lose HP Win8x recovery without worrying.

  (4) retail key - you get ONLY a touch of detail if you buy a copy at Win10 retail.  The version proposed for the free update does not product keys for activation.  You MUST install a version upgrade on top of an existing installation of Win7/8/8.1 so that it will activate.  If you install directly from media Win10 Upgrade, starting from the media and did an install clean, not only will win 10 then NOT activate, right now, it will NEVER activate.  MS talking about providing an option IN THE FUTURE, to allow people to enter a Win7/8/8.1 existing product key - but this feature is not present today.

• HP ENVY 6-1030ec: Win7 clean instalation

  Hello.

  I have HP ENVY 6-1030ec with a 500GB HDD and SSD standard as an additional cache 32 GB. I wanted to clean install Win 7 on it, but was unable to do so.

  First of all, I couldn't readers to the place where I have to choose on what Windows installation disc. I then completely formatted the disk HARD 500 GB, and stupidly enough even the recovery partitions. It did not help.

  I did some google search and found http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/Clean-install-Win-7-hybrid-hdd/t.... I downloaded the drivers, but it didn't work. First of all, it depends in what USB slot is my bootable USB key. A location, I don't see another USB with the drivers on this subject. If I pass the USBs and start installing, it ignores the part where I can choose the drive to install Win 7 in and goes straight to the part where I should load the drivers. In this case, I am able to see the other USB key, find some drivers on it, but having tried to install those, he's said something on this subject there are no new features.

  Then I tried to install Win 7 on the hard disk on another computer. It worked fine and I used Sysprep - EHC and hope that this will solve the problem. I did and it has not solved the problem. After a few questions, I am in the State Win 7 install, reboots and before the part where I chose the username, etc. I get the error "installing Windows could not configure Windows on hardware on this computer." I googled a https://support.microsoft.com/en-us/kb/2466753 solution, but it did not work. First, I tried the drivers (again), and then I turned off RAID. Now, when installing Win 7, I see not only on the HARD drive, but also on the SSD. However, I still get the same error.

  I googled some more and found http://www.tomshardware.co.uk/forum/61328-63-widows-setup-configure-windows-computer-hardware. I tried the msoobe part a, but when I run it, it says the program is not compatible with the current version of Windows and that I should check for x 64 or x 86 system.

  I also tried to install Win on another HARD drive. This time I still, even had to choose the user name in Windows, set time zone, put in the product key, but then I get the error "failed to initialize the connection process. Interactive Logon Process initialization has failed. Please see the the event log for more details". I tried Googling, but is a few tips for when this occurs after Windows worked normally.

  I did Setup Win 7 as many times, but it never occurred to me. I'm really confused right now and you'd be grateful for any help.

  Best

  FF

  Hello.

  Thanks for the reply.

  I tried the tests at some point earlier, all passed without problem. The other link you suggest the links just to this question.

  Anyway, I solved it by installing Windows 10 directly.

  FF

• HP Envy 15 Windows 7 Professional clean install Driver questions

  This morning, I did a clean install of Windows 7 on my brand new envy 15 (LW897AV), which includes the deletion of backup partition as the partition driver HP.

  Unfortunately, many drivers not installed, and I can't find a way to find them. This includes Beats audio driver (I have the audio control panel, but it is not connected to the button on the side volume control) as well as the microphone and some drivers that appear in the devices Panel but the diagnosis is not able to find.

  

  Is there a way to fix this now, or should I cave and pay the $20 and get a recovery CD?

  Get it up to 3 Intel Chipset Installation Utility drivers missing... What the devil. I'll get the restore CD. Guess that's what I'm trying to be creative with my software. :/

• HP 15 G029CA: Drivers of CD/DVD to clean install

  Hello

  I want to do a clean install of windows 7 64 on my HP15-G029CA (originally on win8)

  I start the installation from a usb key but cannot do because it always asks for the CD/DVD drivers.

  I have the hard drive (including the part of recovery) Chantilly

  As I read on some posts here, it could be related to chipset or RAID drivers?

  I am blind and I need help

  Model: 15-G029CA

  Product: F9J06UA #ABL

  Best regards

  Hello:

  In addition to what Erico posted, you must:

  1. make sure legacy mode is enabled in the BIOS and safe start is disabled.  Windows 7 is not compatible with secure startup.  Check out this guide for which parameters to change.

  http://support.HP.com/us-en/document/c03736054

  2. connect your USB key on one of the USB2 ports so that it works.  It won't boot from the port USB3.

• HP Envy TS m7 Ntbk E0K99UA #ABL: HP Envy laptop Windows 10, clean install and reinstall applications preinstalled

  Hello

  8.1 Windows, I've just updated my HP Envy laptop to Windows 10. I now have a Windows 10 product key (that I found using the Microsoft tool productkey. The update went well. All the drivers have worked. The question isn't here.

  I have to do a clean reinstall of the laptop. Too much shit...

  I know how Windows 10, but I don't know how I'll be able to reinstall the app pre-loaded, he came with the laptop.

  Firstly, Windows 10 kind of RecoveryMgr blocked... I just can't access more...

  If I boot with the drive D or the backup media, I created, I'm only given the opportunity to reinstall completely (but, of course, for Windows 8).

  Two questions:

  1. from the D drive or my backup media, is there a way to separately select application to install? (Everything seems compressed and it allows me to start the installation of each software program.

  2-if I reinstall Windows 8 using backup media, I created (or d reader app), I'll have my own installation... but I'll be able to re-update to Windows 10? (remember, I now have a product key...).

  Thank you.

  Sébastien

  Your best option would be to use the recovery media to reinstall the original OS. Since you have an activation key of license for the original operating system meets the requirement to update Windows 10.

  Once you have done this, you can use the key to creation of Windows Media to create a bootable installation flash drive or to proceed directly to Windows 10.

  Windows 10 installation as an upgrade has the advantage of you to have the applications installed at the origin of the original OS present and ready to use in your new installation of Windows 10.

  Otherwise with a clean install of Windows 10, the HP Recovery Manager wil do not exist, or you can install it separately.

• EliteBook 840 G3: Elitebook 840 G3 clean install of Windows 8.1 - how to install the drivers?

  I bought my laptop working from a former employer, provided that the disk was completely wiped out (no recovery partition or whatever it is) and so I need to do a full clean install.

  I installed Windows 8.1 successfully for an external USB DVD. The system starts, but device drivers are missing, including wireless and wired networks.

  On the website of HP, I downloaded the device drivers for this machine/operating system combination. These downloaded files are .exe files. I put them on a USB key so that I can transfer them to the laptop. I thought I'd install them as follows:

  In the windows Device Manager, identify the network device, right click, select "install driver", point windows in the directory containing the .exe files downloaded.

  It does not work. Windows does not recognize the files .exe as pilots.

  Q1: I'm supposed to perform each of these .exe files (IE, which will install the drivers, and windows will then they are present?

  Q2: Which of the 2.3GBytes drivers should I install? If I install the network drivers Windows will be able to "search the Internet" and find all the other missing drivers?

  Q3: Is it possible to get an OEM installation disc that makes the entire process less painful?

  Thanks in advance for any help and advice.

  You are the very welcome.