Office Jet 3050: Desk jet 3050 WiFi light flashing.

Similar Questions

• Satellite L650 - the on and WiFi light flash

  Hi guys,.

  Recently bought a nice L650 Satellite, I'm having a problem with the first start-up, if I press the button on the WIFI light flash on me and continue blinking at me for about a minute then the machine will start according to the normal, it does the same thing if power is or is not connected to the laptop tried to remove battery and boot comes with power, same question, once the laptop has managed to start itself its fine, I can turn it works like many times I like without problem.

  HELP, no idea what is causing this issue?

  Thank you
  Lee

  Have you connected external devices to your laptop as external input devices, USB key, etc.. ? If so try to remove them and test it again.

  If Notepad starts after a minute go to Configuration of the BIOS (F2 key) and try to load the default settings.

• 5740 HP Office Jet: No. WiFi

  The HP office jet 5740 just buy, could not get WiFi to work. Not followed the instructions several times tried to enter the password and network name no joy.

  Using ASUS laptop and have ATT Uverse cable and my laptop Wifi takes the home WiFi and I have internet.

  Question: This printer will work with this kind of WiFi?

  With the printer on my lap top does not detect but detects several other WiFis in the neighborhood.

  The printer does not detect it.

  Question: My laptop cannot detect the printers signal even if I can't connect?

  The printer works it will make a copy by push button on the screen of the printer and when I connect it to my laptop via an ethernet cable just no. WiFi.

  My results wireless network print said, warning "the wireless radio does not work. Contact HP support. »

  Question: Is this part of the 'radio' from the printer or router?

  Looks like the ATT WiFI is OK.

  I loaded the CD HP and my laptop has recognized and set up the printer and I printed one color photo with the Ethernet cable connected between them but without any cable not hooked up other than the power cord no wireless connection.

  It is supposed to have two ways to connect the WiFi but I don't have a male type A USB 2.0 cable.

  Hi @SamWatkins001,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand that you have a HP Officejet 5740 e-all-in-one printer which does not connect to your WiFi. I would like to help.

  Thank you for a lot of useful information, including in your message.

  You are right in thinking that the computer should see signal Wireless Wifi Direct to the printer when he sees all the other neighborhood WiFi networks. It would probably, if the wireless radio was working properly.

  When it is said that the 'wireless radio does not work"on the Test print wireless, it means that the wireless on the printer does not work.

  There is not much to do at this point but contact HP Support. What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Office Jet 2540: Wifi password

  Hi, I installed my new HP 2540 Desk jet to my iPad and you use a router. The problem is when I click on the printer in my list of wifi, I wonder a password, but do not know the password. I tried uninstalling and reinstalling, but my iPad is not back to the original installation procedure when the password is printed. Can I get a different password some how?

  Hello

  You can use direct funtion of turining the button your printer wireless wireless on the front of the printer. This allows to generate the printer it's own singal wifi that you can connect through any wireless device.

  To find the wireless password, simply hold the direct wireless for more than 3 seconds and it will display the password on plain paper (make sure that the paper is loaded).

• Jet Office HP 3050 has felt and no longer works because of your eprint implemented

  my jet office hp 3050 has been put in place by a computer technician and it worked very well.  I have a MacBook Pro using the Microsoft word 2011 program.  I couldn't print my document as asked me to the printer to join your eprint.com, I did. Of course I signed that I agree with your very long terms and conditions before proceeding further with the connection.   It is said that I did successfully, however, I can't print.  In addition, he said that my printer would work for two weeks, which I guess means I have to go through this hassle every two weeks...

  He repeats to me complete e-mail address, and then press OK.  It then shows me my e-mail address of HP and I press OK then I get full address of e-mail and we keep going like this.  So until I'm able to get help from you I must complete another questionnaire with security and confidential information so that you know that they are 'me '.  However, when we continue with it, my computer asks me if I want to do this because it is not a secure line.  Awesome, this is logical for a person.  After all these hassles, can someone please help. And Yes you can send me emails to respond to this request for assistance.  And no, please not to transfer the other emails etc., marketing.  I have a HP printer and I hope it of not another.  My neighbor has the same, however, an older version and it says it's a good. Thank you

  I just want to confirm that my printer problem has been resolved by the judgment of my MacBook Pro and restart.  TKS.

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Mac for printer Office Jet Pro 8600

  I have an IMAC desk top connected to an Office Jet Pro 8600, running MAC OS 10.6.8.  I can't scanner to scan photos to a specific size.   I use the HP utility but no matter what I try to do the witnesses only scanned image angle front right of the scanner glass.  How can I change the size of the JPEG scanner and how to scan some picture of the size that I place on the glass?

  Hi paul8588,

  Thank you for your answer!

  Here is a video, Scanning HP 8600 Series to Mac OS. This will show you what you see for your scanning options.

  I hope this clears up things and have a good day!

• OfficeJet 4500: office jet 4500 pages come out blank

  I have a hp Office Jet 4500.  Lately when I print only blank pages come out.  It is still ink in the black cartridge, so I cleaned it according to the instructions from hp (printer only in manual mode). I still get blank pages.  I guess I have to buy a new ink cartridge, because sometimes they dry out before they are empty, but now I'm not sure that's the problem.

  This may seem a stupid question, (I don't know the correct names for parties), but is the bar with light, supposed to go under the glass when she prints?  I lifted the hood to see what was wrong and I noticed it wasn't moving, even if the light was on.  I never paid attention to the printer while it was working properly.  I would like to know whether to fix it before I have to waste money on an ink cartridge.  I know that the digital display informs you if there is a power outage, but it didn't.  Otherwise, the printer goes through its motions normally.

  Hello @epona1 , welcome to the Forums of HP!

  I read your post on how your Officejet 4500 is print is no longer with the ink to print outs. I want to help you!

  The bar with light I think you describe looks like this mechanism to scan, which does not move when you make prints, so I don't see that the question. The question seems sound, as for me, would be the printhead to the printer. I say this because you have tried to change ink already and the pages are always feel empty, when normally change the cartridge would help and fix this type of problem.

  Having said that, I suggest that try you this guide and try the steps it will list. It may possibly fix the problem of blank page for you. If not and the problem does not go away, call us directly to discuss your printing with HP options.

  The problems of print quality for the HP Officejet 4500 all-in-One Printer Series

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• Office Jet Pro 8610: El Capitan problem - error =-19 unsupported color space

  Q: problem for you to connect to HP Office Jet Pro 8610

  Apple - iMac 21.5 "®-Intel Core i5 (1.6 GHz) - memory of 8 GB - 1 TB hard"

  El Capitan
  
  Printer: HP OfficeJet Pro 8610
  
  Help my printer set-up of mother-in-law to his new iMac. Wi - Fi connection; It will display the page of 'test' for the HP Mac utility. Printing from an application (Mail, etc.) results in "unsupported Colorspace = - 19" error.
  
  I uninstalled and ran disk first aid and re-connected. I deleted Printers/Scanners and added in. Various combinations of the above steps with re - starts between the two. Am already balding, can't afford to get out more. Any advice greatly appreciated.

  Well, to refine the question, you have a blue flashing or a solid blue light on the printer?

• Office Jet 6700: HP Office jet 6700, I try to print it says printer ready, file print empty!

  I have a HP Office Jet 6700. I am trying to print a document, it will say print Untitled. The print queue of the printer will open and say printer is print ready, empty file, Idle.

  It is automatically paused printer. When I try to click on the document itself in the print queue and resume printing it gives the same message.

  Power on the printer flashes slowly as well.

  I hae rebooted my computer and restart the printer completely several times and it still didn't work. I printed just something about this last night so I don't know what the problem is.

  Hello! Welcome to the @Chinadoll702 forums

  I read your post on printing problems you encountered on your Mac running 10.6 and your Officejet 6700. I have some ideas in mind to start and I would like to know the results and we will take it from there.

  Update the firmware of the printer: get the latest Firmware and updates

  Be able to reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make a few copy then and tell me if the copies suspend, cancel, do not work, etc.

  Try to print the text change on your Mac as well and get back to me with the results.

  Good luck

• HP Office jet 6700: disabled network HP office jet printer capabilities

  Please help, my Hp office jet printer will not conect to internet it says the built in network capacity have been disabled and contact the network administrator

  Hi @shell1,

  I can help you reset the printer to get the network features reactivated.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Office Jet Pro 8600: problem of authentication on a Android phone net Office Pro 8600

  Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store

  Hi Banhien

  After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.

  Jack1121

• Office Jet Pro 6830: disappointed customer!

  I just bought the Office Jet Pro 6830 to replace an old one that died. I find now that I can't install it on my Mac Pro Lapbook! The CD that came with the new printer had no program installation. He wants only to go online to install the printer.
  I only use my printer to print files from my laptop as I HAVE NO INTERNET CONNECTION IN MY HOME! I tried to go to a WiFi with my laptop to download the installation, but get a 503? Tell an error message that I am not allowed to use the page.
  I am 66 years old and disabled in order to take the printer elsewhere to install is out of the question. Furthermore, I live in the Bush with the city the more close 16 miles away!
  Now, I'm sorry, I bought what I thought, it was a great replacement for my old Office Jet Pro. I will seek for a company that provides the installation CD WITH the printer!

  Hi @Madoldlady,

  You must update the 10.6 to 10.7 to use this printer.

  The printer works on the MacBook Pro 10.7. The CD should install the drivers on the Mac 10.7.

  If not, then I suggest you get the drivers of someone else who is on the internet and save it on a drive flash and then you can install the drivers on your computer from the flash drive.

  I hope this helps. Thank you.

• HP office jet 6500 E709n: HP office jet 6500 E709n

  I have a HP jet office 6500 e709n connected to my home network. He worked with my old computer. Now computer died and got a new computer - Dell Inspiron. I downloaded the driver from HP office jet 6500 E709n and started working with the printer part in this product with my new computer. Print and FAX also work.  But scanning does not work. I need a few tracks here to do my part to scan in HP Office jet 6500 E709n works.

  Hello! Welcome to the @EdwinD forums

  I read your post on the problems of scanning that you meet with your Officejet 6500 Wireless, Windows 8.1. I understand that you mentioned that you have downloaded the driver, however, if the base driver has been installed, the full functionality will need to be installed to scan.

  Get the complete driver here: HP Officejet full feature and driver software

  If you have the complete driver installed correctly and completely, try running the print and Scan Doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  Please send me a screenshot of the results, or specific details.

  Also try a reset:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Happy new year!

• Digital control on Office Jet Pro 8625 display has become dark

  Control on HP Office Jet Pro 8625 screen became dark after I lifted the cover plates to copy a piece of paper.  No amount after pressing the reset button on the front of the unit allows.  Am able to print from the laptop connected fine.  How can I get the screen to control the light again to the top?

  Hi @our-HPand welcome to the Forums of HP!

  I understand that your display screen went dark.  I'd like to help!

  It may be a problem with the firmware, in which case we will need to be updated.  To make sure that we use the appropriate firmware update, I must first of all a little information. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend performing a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer. Thanks for posting on the HP Forums!