Mac for printer Office Jet Pro 8600
I have an IMAC desk top connected to an Office Jet Pro 8600, running MAC OS 10.6.8. I can't scanner to scan photos to a specific size. I use the HP utility but no matter what I try to do the witnesses only scanned image angle front right of the scanner glass. How can I change the size of the JPEG scanner and how to scan some picture of the size that I place on the glass?
Thank you for your answer!
Here is a video, Scanning HP 8600 Series to Mac OS. This will show you what you see for your scanning options.
I hope this clears up things and have a good day!
Tags: HP Printers
I see a lot of forums about this issue but no real solution.
I have a HP officejet Pro 8600. I used to have a small HP but never had this problem.
I agree that in word, you get the box to uncheck if you don't want to double-sided printing. BUT when in Excel, you don't get the same printer option and I can't find anywhere to stop printing double-sided to Excel. It's so boring.
Can anyone help please?
Thanks in advance
Please follow the steps below for dosed duplex printing:
Go to Excel, click the file menu and select print. The print window is displayed.
NOTE: The print window might be minimized. Click Show details to see all the available parameters.
Click the Copies and Pages in the print dialog box.
Select layout from the drop-down.
Set the duplex option as Off
You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.
I can't send or receive faxes on my HP Officejet Pro 8600. I get a 351 error when I try to fax. Can you help me?
Here is the solution for error 351 and causes:
Cause 1: the remote computer did not a command to fax on the local computer as the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.
Solution: New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.
Cause 2: The call waiting service can cause this error. The "click", heard a call incoming, is actually a momentary break from the line.
Solution: Disable the ECM. Errors might still occur and could lead to a degraded on the received page image quality. However, the ability to send the entire document will be improved.
Cause 3: The remote user pressed the Stop key while the reception was underway. In rare conditions, incompatibility between the two machines could cause the remote machine to abandon the call.
Solution: Try to send to a lower bit rate.
I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!
When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:
Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...
I work on behalf of HP.
I was looking for a fax to the internet number for my Office Jet Pro 8600. I looked at the forum, but could not tell if my printer was able to do it or not. If you can let me know I would appreciate it.
Old man marine
Any HP ePrint printer is compatible with eFax and your printer is an ePrint printer:
Please contact the eFax company, (with your $), they will show you how to set up.
I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.
About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.
I hope this works!
Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?
If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?
You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.
Let me know if you need additional assistance.
How to choose a print with black ink only on the Office Jet Pro 8600?
Please read this post then provide some details. What operating system? For Windows 7, the setting must be in the Advanced tab as shown below. Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.
With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?
Please download the software package and the following driver and install on your computer (s) 10 of Windows:
I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?
Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.
I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools... It isn't that I know where they are and who's who for the most part.
In addition, scanning is not clear. Everything is faded. However, it still prints and faxes by a fine. I hope I don't have to buy a new All In One Printer. I finally got most of the glitches and tricks when I have a problem with it. Is it possible that there is a light bulb needs to be changed or something? I appreciate your help & feed back as soon as possible. I use in an office on a daily basis.
Welcome to the Forums of HP's Support.
I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.
If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while. Also, I have Windows 7 on this laptop if it makes a difference.
1. go to control panel and choose:
2. material and audio, then
3 devices and printers, then
4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then
5 HP Printer Wizard, then
6 scanner activities, then
7. analyze a document or a picture, then
8. Save as PDF
10. save in a folder you choose
I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.
Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.
For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.
Yet once I thank you for taking the time to help other members of the community, so thank you once again!
My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?
Welcome to the HP Forums!
I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!
"Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....
If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope this helps and have a nice day!
Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store
After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.
Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10. Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy. The scanner is currently in use. Wait until your previous task is completed, and then try to scan the image.
-There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on. Has anyone met and solved this problem?
Thanks in advance for any help you can provide!
Thank you for using the HP forum. You can try the following:
Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:
Please uninstall and reinstall the software COMPLETE features, follow these steps:
1. download and save the software COMPLETE features (do not install online)
Before you download, choose the right model, the operating system and complete software functionality.
2 uninstall the software from your computer
3. install the FULL feature software "saved".
Here are some resources for you scan:
Quick Guide for scanning needs
Hope that helps!
Maybe you are looking for
I recently bought a new laptop after trading in my old laptop to store credit. I install Firefox and go to download all my passwords, bookmarks, etc, only to find out that there is a new version of sync that I needed to be upgraded to do so! So, basi
I tried to boot my PC this morning and got this: your PC needs to be repaired. The Boot Configuration data file contains no valid information for an operating system. File: \BCD. Error code: 0xc0000098
I want the printer to black ink only as a default value, project, to make it cheaper to print things unimportant! My 5180 Photosmart all-in-one offers a menu of easyunderstanding to fix. Everyone knows the secret :-)? Olov
Hello. bought an invisible viewfinder of the NEX-3... it turns out that the case was too good to be true, because it is a Japanese model (takes great photos!) Downloaded the NEX - 3V5_Update1112a.exe, but do not want the camera in brick. Am I able to
Hi Please help, my account was blocked and I can't access it. In order to get it back, I need a verification code. And he sent an e-mail verification code, but this isn't my email, it's a fake, I have all my information, password and secret answers.