Office Jet Pro 8625: fax a document

Similar Questions

• Digital control on Office Jet Pro 8625 display has become dark

  Control on HP Office Jet Pro 8625 screen became dark after I lifted the cover plates to copy a piece of paper.  No amount after pressing the reset button on the front of the unit allows.  Am able to print from the laptop connected fine.  How can I get the screen to control the light again to the top?

  Hi @our-HPand welcome to the Forums of HP!

  I understand that your display screen went dark.  I'd like to help!

  It may be a problem with the firmware, in which case we will need to be updated.  To make sure that we use the appropriate firmware update, I must first of all a little information. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  In the meantime, I recommend performing a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer. Thanks for posting on the HP Forums!

• Office Jet Pro 8625: Web update Services downloads partially, then freezes

  When I try to download an update for web services, my Office Jet 8625 downloads a part of the update then just stops downloading.  Sometimes the reports printer as little as 5% of the downloaded software, sometimes as much as 45% downloads before the download progress comes to an abrupt stop.  Or anywhere in between.  Finally, I get the error message "failed download.  Product update could not be downloaded"I tried to restart the printer and I restarted the computer (even though I think that the printer is download regardless of the computer).

  All other downloads to the computer (including video streaming bandwidth intensive) are no problem.

  Hi @Esteban001.

  Welcome to the Forums of HP's Support. I understand that your 8625 cannot download an update of the firmware. I would like to help.

  I see two ways to address this issue. It could be a bad quality of Web Services State of the connection is causing this to happen. You can find Web Services troubleshooting in this post from @E-roq. Pro tips: Troubleshooting printing and scanning to Email Issues in e-all-in-one printers.

  The other approach is to download the update of the firmware on your computer and then update the printer. You can find the update of the firmware on the same page as the drivers and software for printers. Just scroll down until you see the Firmware and click on it. Here is a link to the page of the pilot 8625.

  Let me know what try you and if you have success. If you do, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Office jet pro 8625: ink cartridge levels

  Don't really see instructions on this printer and I wonder if there is a way to determine which cartridge is low on ink when the error message appears. I thought having the distinct colors would allow me to change only what he needed, but I can not sonthatbunkess I know that one is weak.

  This information is in the Guide of the user on the website of HP.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5385111/manuals

  Download and read the User Guide.  Page 97 has your answer.

• Office jet pro 8625: disabled my web services

  My original problem was that under the security settings, I accidentally turned off everything, so I'm not able to connect to my computer. The question is 'integrated network capabilities have been disabled. How to reactivate because I can't even connect to the IP address or find an IP address, because this message keeps coming up?

  Hi @mmills18, thanks for joining the Forums of HP, I would be happy to help you with your 8625.

  I understand all the settings have been disabled accidently and now you can not connect wireless to re - activate. I suggest resetting the printer and rerun Setup wireless. The printer Reset clears all settings and reenable all.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

• HP Office Jet Pro 8625: vertical lines on the HP Office jet Pro 8625 color prints

  When printing color photo, there is a thin vertical lines about an inch of distance. Ruled out interference from other devices connected to the printer via the USB port. I did copy the image on USB and put it in the USB port of the printer. The image has NO vertical lines. I have a suspicion the printer driver. Anyone with the same problem?

  Hi Rainbow,

  Thank you for your interest. I have solved the problem. It turns out that the only time where I had vertical lines wes when I was printing color photo of my computer, program Picasa or Microsoft. The disapeard question when I chose the best print quality. It is much more slow but clean! the lines have been in my opinion line breaks in the quick printing mode. Once again thank you for your interest and help. Respectuly MUFFEN

• HP Office Jet Pro 8610 do not print, but will only fax

  We have a HP Office Jet 8610 Pro and it worked fine until we hung like a fax also Thursday.

  He used to copy, print, scan perfectly but it takes a new fax machine, so we went and bought the phone cord and hung a fax and telephone line with built in answering the Office Jet and the fax jobs, but now it not print a document in Open Office to the printer because she's trying to make a fax cover page.

  I've ran out of ideas can you please help?

  There are two pilots "printer" there, to print, choose the "printer Officejet Pro 8610' instead of the 'Officejet Pro 8610 FAX. Probably, you set another value by default when the fax feature is added, which is for the PC - fax. If you use the print function more often than the fax, make non-fax the default printer.

• How to scan using your HP Office Jet Pro 8600

  Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if it makes a difference.

  1. go to control panel and choose:

  2. material and audio, then

  3 devices and printers, then

  4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then

  5 HP Printer Wizard, then

  6 scanner activities, then

  7. analyze a document or a picture, then

  8. Save as PDF

  9 scan

  10. save in a folder you choose

  I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.

  Roxi

  Hello Acupuncture,

  Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.

  For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.

  Yet once I thank you for taking the time to help other members of the community, so thank you once again!

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Office Jet Pro 8100 sometimes prints random text

  I have a new Office Jet Pro 8100 and I love it!  However, sometimes when print a monthly newsletter or magazine text will become jumbled up garbage.  Text that is embedded in the images is ok, but sometimes not.  That I remember that this only happens with pdf documents.

  If I come back and re - print pages, it comes out ok.  Sometimes, several pages are ok and then the text will be jumbled up.

  What is a printer problem, or something in the text document upset the printer?

  Hello

  If the problem persists, please use the following document to solve the problem; Page impriment continuous characters strange or scrambled in Windows.

  I look forward to hear from you.

• Office Jet Pro 8600: eFax

  I was looking for a fax to the internet number for my Office Jet Pro 8600.  I looked at the forum, but could not tell if my printer was able to do it or not.  If you can let me know I would appreciate it.

  Old man marine

  Hello

  Any HP ePrint printer is compatible with eFax and your printer is an ePrint printer:

  http://h71016.WWW7.HP.com/HTML/PDFs/CM749AOfficejetPro8600eAiO.PDF

  Please contact the eFax company, (with your $), they will show you how to set up.

  Kind regards.

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• HP Office Jet Pro 8600 help how do I enlarge the print on an original when it is in copy mode?

  I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?

  Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.

• Office Jet Pro 8500 won' t scan

  Help.  My Office Jet Pro 8500 scan is no longer.  I click on the printer icon and select scan.  It seems to be analyzed.  But there is no sign of an item scanned on my desktop which is where I selected the item scanned go.  I have a Macbook Air with OS 10.9.5

  It works!  Thank you very much.

  As you are a HP pro, maybe you can help me solve my second problem.  I have the HP Office Jet Pro 8500 connected to my Panasonic phone answering machine.  He used to work without fault.  When a call came, she was not picked up the appellant was able to leave a message. If a fax came the HP received the fax.  But recently, when a call comes in, the HP picks up, anticipating a fax, and the appellant was not able to leave a message.  Any suggestions?

• HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done

  Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10.  Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy.  The scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image.

  -There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on.  Has anyone met and solved this problem?

  Thanks in advance for any help you can provide!

  ritao

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/identify?q=+HP+Office+Jet+Pro+8600&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Before you download, choose the right model, the operating system and complete software functionality.

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Here are some resources for you scan:

  Quick Guide for scanning needs

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps!