Office model IBM Thinkcenter D7G, type computer 8183 (old series)

Similar Questions

• RAM Kingston IBM ThinkCenter M52 problem (8113)

  I just bought a new RAM to my computer and it does not work. It's a Kingston DIMM DDR2 1024Mo (1 GB 2Rx8-5300U-555-12). The computer does not seem to recognize this RAM but it fits perfectly into the slot.

  Did some research on this problem, I found that each motherboard takes support only a certain range of types of memory in certain combinations. However, he went to the shop with the original RAM and he showed to the saleswoman and that's what I get for replacement.

  Can indicate you where I can check what kind of RAM your motherboard accepts? Or in the case where this is taken in charge, how can I install?

  Hello people! I solved the problem. Main problem is that IBM ThinkCenter M52 (8113) Bios does not configure the frequency of the RAM, so it must be PC-4200, 533 MHz instead of PC-5300 (667 MHz).

• Optical drive for IBM Thinkpad R50e, type 1834.

  Have been looking for a DVD RW for an IBM Thinkpad R50e drive, type 1834. This has proved to be not easy.

  The support page from Lenovo for DVD options for "hard disk, CD-ROM and the options of DVD - ThinkPad R50, R50e, R50p, R51, R51e", located at http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-53136, States 'Note: not supported with the ThinkPad R50e systems.» And my model, 1834, is indeed not listed as supported in the "optical drive options.

  Why, when I specify the model and the type I have, so a lot of readers not supported those listed and not supported? I'm not interested in optical drives that does not fit. I would like to know who does.

  I do not have the old original disk so I can't check the number of parties on the matter. So, what number of coins is the DVD RW drive has that fits the IBM Thinkpad R50e, type 1834?

  Oerjan Pettersen

  one of them will work 92 p 6575 / 13n6827 / 39t 2723 / 39t 2861 it says not supported because it came with the cd-rw/dvd not dvd - rw

• My office uses Windows 7 and my computer is running Vista 64 bit. My home computer can work with my office from a USB files?

  original title: office / Home compatibility

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  The game, August 5, 2010 15:24:35 + 0000, JerryPMP wrote:

  My office uses Windows 7 and my computer is running Vista 64 bit.  My home computer can work with my office from a USB files?

  Yes. There is no problem with their two different versions of
  Windows. The files contain not what anyone who still marks that
  Windows version they were created under.

  But there is a potential problem. If the files have been created with a
  another version of Office that you have, you may have
  Difficulty reading the. For example, Word 2007 and 2010 creates .docx
  files by default (unless you tell her save as .doc) and if you
  an earlier version of Word, you will not be able to open a .docx file
  unless you install the compatibility pack to
  http://Office.Microsoft.com/en-us/Word-help/open-a-Word-2007-document-in-an-earlier-version-of-Word-HA010044473.aspx

  or http://tinyurl.com/29f5scy

  Ken Blake

• I need to disable the Office to move to a new computer

  Can I disable Microsoft Office 2007 on a computer and so I can move it to my other computer that I use most often to remove it?  Help, please

  Quote:

  http://www.technologyquestions.com/technology/Microsoft-Office/41199-how-many-times-can-i-install-MS-Office-Student-2007-a.html

  MS Office Home and Student edition (Excel, Word, Powerpoint, OneNote) allows 3 installations for a single household.

  Other editions of detail, such as MS Office 2007 (Word, Excel, Powerpoint and Outlook) Standard edition allows 2 installations for one person.
  http://Office.Microsoft.com/suites

  If you have an activation problem after the removal of a product from the retail of MS Office to another computer, you can use the Activate by phone
  method).

  Bob Buckland?  :-)
  Products of MS Office System MVP

  If Office is OEM license, it cannot be moved.
  To move the desktop, install it on the new computer, uninstall old.

  Activation problems, contact Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.

  I need help download microsoft NET frame model 2.0 on my computer so that my Lexmark 5500 printer will not work correctly.  Please call me at the

  Thank you
  John Robinson

  Original title: hardware device

  The lies of failure with your method of installation of the drivers / software, you install using a Lexmark CD or download from Lexmark support?

  http://support.Lexmark.com/index?ProductCode=LEXMARK_PRO5500&page=product&locale=en&UserLocale=en_US#2

  NB there is also a firmware update

• When I try to connect to my office it asks me to type in the security key

  I'm trying to find the security key for my office. my laptop has a wireless con.  When I try to connect to my office it asks me to type in the security key I don't know where to find it

  The key to security or password is usually configured by accessing the settings of your wireless router.

  You may need to contact your ISP for more details on how to do it.

  J W Stuart: http://www.pagestart.com

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  just bought a new computer. an old crashed. How can I sync my iphone with the new computer?

  Original title: sync

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• As the computer is old and slow it is better to increase the RAM or better to invest in a new computer update?

  original title: lack of RAM

  McAfee, unable to update as the only security base 256 and 512 MB of RAM required. As the computer is old and slow it is better to increase the RAM or better to invest in a new computer update. Would appreciate help in this case. Also as I'm pretty computer illiterate, please use the terms that I can follow. Thank you

  Hi Kathleen Almeida,.

  Because the computer is old, instead of upgrading the ram, you can buy new computer. I suggest you contact system manufacturer more about if you need to upgrade or buy a new computer.

• My updates to the Web site and I can see on a phone, but when I try to view them on a computer my old site always comes back

  I have my domain through Godaddy, I created my site through muse, and I use the catalyst of the bus for the accommodation.  I published my new site and when I try to see it from a phone sometimes just how I want.  But when I try to see it from a computer, my old site.  Any suggestions as to what I can hurt?

  Thank you!

  Amber

  Clear the Cache of the browser on the desktop

  Jim

• I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there was no place to type

  I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there is no place to type in the second set. How can I check if the first has been correctly activated?

  You get usually just a serial number by program... a list of 24 numbers, 6 sets of 4.

  Click the icon of the program and see if it boots without asking for a serial number.

  If it is not running now, please contact support:

  To contact support, please click the link below, click on the still need help? option in the blue box below, then choose the cat. Make sure you are signed in with your Adobe ID, have cookies enabled and have deleted your cookie cache.  If you have any questions, try another browser.

  Serial number and activation support

  Guinot

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• Slow down the performance of office and viceo on W7 (SP1) computer to office

  Dragging windows on my desk late movement of the cursor. Videos play mode by stop-motion. I tried to install the updates, restart, disk defragmentation, etc, etc... Nothing seems to work. I use Office home and Student 2007 on a 64-bit desktop. Any ideas? Thank you.

  Hello

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• How can I scan a document in the office so that I can type on it

  I have a will form to fill in for someone. I have scanned the form but do not know how to type on it then.

  Hello

  What operating system is installed on your computer?

  I suggest you follow the instructions in the link to fix the problem you are experiencing:

  Scan and edit a document

  http://Office.Microsoft.com/en-us/Word-Help/scan-and-edit-a-document-HA010254879.aspx